Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userHI intensity mapping : a single dish approach
195
0
0.0
(
0
)
Added by
Alkistis Pourtsidou
Publication date
2012
fields
Physics
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
We discuss the detection of large scale HI intensity fluctuations using a single dish approach with the ultimate objective of measuring the Baryonic Acoustic Oscillations and constraining the properties of dark energy. We present 3D power spectra, 2D angular power spectra for individual redshift slices, and also individual line-of-sight spectra, computed using the S^3 simulated HI catalogue which is based on the Millennium Simulation. We consider optimal instrument design and survey strategies for a single dish observation at low and high redshift for a fixed sensitivity. For a survey corresponding to an instrument with T_sys=50 K, 50 feed horns and 1 year of observations, we find that at low redshift (z approx 0.3), a resolution of 40 arc min and a survey of 5000 deg^2 is close to optimal, whereas at higher redshift (z approx 0.9) a resolution of 10 arcmin and 500 deg^2 would be necessary. Continuum foreground emission from the Galaxy and extragalactic radio sources are potentially a problem. We suggest that it could be that the dominant extragalactic foreground comes from the clustering of very weak sources. We assess its amplitude and discuss ways by which it might be mitigated. We then introduce our concept for a single dish telescope designed to detect BAO at low redshifts. It involves an under-illumintated static 40 m dish and a 60 element receiver array held 90 m above the under-illuminated dish. Correlation receivers will be used with each main science beam referenced against an antenna pointing at one of the Celestial Poles for stability and control of systematics. We make sensitivity estimates for our proposed system and projections for the uncertainties on the power spectrum after 1 year of observations. We find that it is possible to measure the acoustic scale at zapprox 0.3 with an accuracy 2.4% and that w can be measured to an accuracy of 16%.
rate research
Read More
BINGO is a concept for performing a 21cm intensity mapping survey using a single dish telescope. We briefly discuss the idea of intensity mapping and go on to define our single dish concept. This involves a sim 40 m dish with an array of sim 50 feed horns placed sim 90 m above the dish using a pseudo-correlation detection system based on room temperature LNAs and one of the celestial poles as references. We discuss how such an array operating between 960 and 1260 MHz could be used to measure the acoustic scale to 2.4% over the redshift range 0.13<z<0.48 in around 1 year of on-source integration time by performing a 10 deg times 200 deg drift scan survey with a resolution of sim 2/3 deg.
HI intensity mapping is an emerging tool to probe dark energy. Observations of the redshifted HI signal will be contaminated by instrumental noise, atmospheric and Galactic foregrounds. The latter is expected to be four orders of magnitude brighter than the HI emission we wish to detect. We present a simulation of single-dish observations including an instrumental noise model with 1/f and white noise, and sky emission with a diffuse Galactic foreground and HI emission. We consider two foreground cleaning methods: spectral parametric fitting and principal component analysis. For a smooth frequency spectrum of the foreground and instrumental effects, we find that the parametric fitting method provides residuals that are still contaminated by foreground and 1/f noise, but the principal component analysis can remove this contamination down to the thermal noise level. This method is robust for a range of different models of foreground and noise, and so constitutes a promising way to recover the HI signal from the data. However, it induces a leakage of the cosmological signal into the subtracted foreground of around 5%. The efficiency of the component separation methods depends heavily on the smoothness of the frequency spectrum of the foreground and the 1/f noise. We find that as, long as the spectral variations over the band are slow compared to the channel width, the foreground cleaning method still works.
HI intensity mapping (IM) is an exciting new probe that could revolutionize the future of cosmology. However, the relative faintness of the HI signal when compared to foregrounds of astrophysical or terrestrial origin will make HI IM extremely challenging. The imprint of these foregrounds may result in systematic errors in the recovered cosmological signal. We discuss an IM simulation pipeline developed at Manchester that can introduce systematic errors at the TOD level in order to help assess their impact. We will present results for two potential sources of systematics for HI IM surveys: 1/f noise and the integrated emission from global navigation satellites.
While most purpose-built 21cm intensity mapping experiments are close-packed interferometer arrays, general-purpose dish arrays should also be capable of measuring the cosmological 21cm signal. This can be achieved most efficiently if the array is used as a collection of scanning autocorrelation dishes rather than as an interferometer. As a first step towards demonstrating the feasibility of this observing strategy, we show that we are able to successfully calibrate dual-polarisation autocorrelation data from 64 MeerKAT dishes in the L-band (856-1712 MHz, 4096 channels), with 10.5 hours of data retained from six nights of observing. We describe our calibration pipeline, which is based on multi-level RFI flagging, periodic noise diode injection to stabilise gain drifts and an absolute calibration based on a multi-component sky model. We show that it is sufficiently accurate to recover maps of diffuse celestial emission and point sources over a 10 deg x 30 deg patch of the sky overlapping with the WiggleZ 11hr field. The reconstructed maps have a good level of consistency between per-dish maps and external datasets, with the estimated thermal noise limited to 1.4 x the theoretical noise level (~ 2 mK). The residual maps have rms amplitudes below 0.1 K, corresponding to <1% of the model temperature. The reconstructed Galactic HI intensity map shows excellent agreement with the Effelsberg-Bonn HI Survey, and the flux of the radio galaxy 4C+03.18 is recovered to within 3.6%, which demonstrates that the autocorrelation can be successfully calibrated to give the zero-spacing flux and potentially help in the imaging of MeerKAT interferometric data. Our results provide a positive indication towards the feasibility of using MeerKAT and the future SKA to measure the HI intensity mapping signal and probe cosmology on degree scales and above.
Line-intensity mapping, being an imperfect observation of the line-intensity field in a cosmological volume, will be subject to various anisotropies introduced in observation. Existing literature in the context of CO and [C II] line-intensity mapping often predicts only the real-space, spherically averaged line-intensity power spectrum, with some works considering anisotropies while examining projection of interloper emission. We explicitly consider a simplified picture of redshift-space distortions and instrumental effects due to limited resolution, and how these distort an isotropic line-intensity signal in real space and introduce strong apparent anisotropies. The results suggest that while signal loss due to limited instrumental resolution is unavoidable, measuring the quadrupole power spectrum in addition to the monopole would still break parameter degeneracies present in monopole-only constraints, even without a measurement of the full anisotropic power spectrum.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
