Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userElectron transparent graphene windows for environmental scanning electron microscopy in liquids and dense gases
177
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Due to its ultrahigh electron transmissivity in a wide electron energy range, molecular impermeability, high electrical conductivity and excellent mechanical stiffness the suspended graphene membranes appear to be a nearly ideal window material for in situ (in vivo) environmental electron microscopy of nano- and mesoscopic objects (including bio-medical samples) immersed in liquids and/or in dense gaseous media. In this communication, taking advantage of little modification of the graphene transfer protocol on to metallic and SiN supporting orifices, the reusable environmental cells with exchangeable graphene windows have been designed. Using colloidal gold nanoparticles (50 nm) dispersed in water as model objects for scanning electron microscopy in liquids, the different imaging conditions through graphene membrane have been tested. The limiting factors for electron microscopy in liquids such as electron beam induced water radiolysis and damage of graphene membrane at high electron doses were discussed.
rate research
Read More
Scanning electron microscopy (SEM) of nanoscale objects in their native conditions and at different temperatures are of critical importance in revealing details of their interactions with ambient environments. Currently available environmental capsules are equipped with thin electron transparent membranes and allow imaging the samples at atmospheric pressure. However these capsules do not provide the temperature control over the sample. Here we developed and tested a thermoelectric cooling / heating setup for available environmental capsules to allow ambient pressure in situ SEM studies over the -15 {deg}C to 100 {deg}C temperature range in gaseous, liquid, and frozen environments. The design of the setup also allows correlation of the SEM with optical microscopy and spectroscopy. As a demonstration of the possibilities of the developed approach, we performed real-time in situ microscopy studies of water condensation on a surface of wing scales of Morpho sulkowskyi butterfly. We have found that the initial water nucleation takes place on the top of the scale ridges. These results confirmed earlier discovery of a polarity gradient of the ridges of Morpho butterflies. Our developed thermoelectric cooling / heating setup for available SEM environmental capsules promises to impact diverse needs for in-situ nano-characterization including materials science and catalysis, micro-instrumentation and device reliability, chemistry and biology.
Thin film oxides are a source of endless fascination for the materials scientist. These materials are highly flexible, can be integrated into almost limitless combinations, and exhibit many useful functionalities for device applications. While precision synthesis techniques, such as molecular beam epitaxy (MBE) and pulsed laser deposition (PLD), provide a high degree of control over these systems, there remains a disconnect between ideal and realized materials. Because thin films adopt structures and chemistries distinct from their bulk counterparts, it is often difficult to predict what properties will emerge. The complex energy landscape of the synthesis process is also strongly influenced by non-equilibrium growth conditions imposed by the substrate, as well as the kinetics of thin film crystallization and fluctuations in process variables, all of which can lead to significant deviations from targeted outcomes. High-resolution structural and chemical characterization techniques, as described in this volume, are needed to verify growth models, bound theoretical calculations, and guide materials design. While many characterization options exist, most are spatially-averaged or indirect, providing only partial insight into the complex behavior of these systems. Over the past several decades, scanning transmission electron microscopy (STEM) has become a cornerstone of oxide heterostructure characterization owing to its ability to simultaneously resolve structure, chemistry, and defects at the highest spatial resolution. STEM methods are an essential complement to averaged scattering techniques, offering a direct picture of resulting materials that can inform and refine the growth process to achieve targeted properties. There is arguably no other technique that can provide such a broad array of information at the atomic-scale, all within a single experimental session.
Fast pixelated detectors incorporating direct electron detection (DED) technology are increasingly being regarded as universal detectors for scanning transmission electron microscopy (STEM), capable of imaging under multiple modes of operation. However, several issues remain around the post acquisition processing and visualisation of the often very large multidimensional STEM datasets produced by them. We discuss these issues and present open source software libraries to enable efficient processing and visualisation of such datasets. Throughout, we provide examples of the analysis methodologies presented, utilising data from a 256$times$256 pixel Medipix3 hybrid DED detector, with a particular focus on the STEM characterisation of the structural properties of materials. These include the techniques of virtual detector imaging; higher order Laue zone analysis; nanobeam electron diffraction; and scanning precession electron diffraction. In the latter, we demonstrate nanoscale lattice parameter mapping with a fractional precision $le 6times10^{-4}$ (0.06%).
Electron tomography in materials science has flourished with the demand to characterize nanoscale materials in three dimensions (3D). Access to experimental data is vital for developing and validating reconstruction methods that improve resolution and reduce radiation dose requirements. This work presents five high-quality scanning transmission electron microscope (STEM) tomography datasets in order to address the critical need for open access data in this field. The datasets represent the current limits of experimental technique, are of high quality, and contain materials with structural complexity. Included are tomographic series of a hyperbranched Co2P nanocrystal, platinum nanoparticles on a carbon nanofibre imaged over the complete 180{deg} tilt range, a platinum nanoparticle and a tungsten needle both imaged at atomic resolution by equal slope tomography, and a through-focal tilt series of PtCu nanoparticles. A volumetric reconstruction from every dataset is provided for comparison and development of post-processing and visualization techniques. Researchers interested in creating novel data processing and reconstruction algorithms will now have access to state of the art experimental test data.
Photoelectron emission microscopy PEEM is a powerful tool to spectroscopically image dynamic surface processes at the nanoscale but is traditionally limited to ultra high or moderate vacuum conditions. Here, we develop a novel grapheme capped multichannel array sample platform that extends the capabilities of photoelectron spectromicroscopy to routine liquid and atmospheric pressure studies with standard PEEM setups. Using this platform, we show that graphene has only a minor influence on the electronic structure of water in the first few layers and thus will allow for the examination of minimally perturbed aqueous phase interfacial dynamics. Analogous to microarray screening technology in biomedical research, our platform is highly suitable for applications in tandem with large-scale data mining, pattern recognition, and combinatorial methods for spectro temporal and spatiotemporal analyses at solid liquid interfaces. Using Bayesian linear unmixing algorithm, we were able to discriminate between different X-ray induced water radiolysis scenarios and observe a metastable wetting intermediate water layer during the late stages of bubble formationformation
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
