Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userMirrors for slow neutrons from holographic nanoparticle-polymer free-standing film-gratings
142
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We report on successful tests of holographically arranged grating-structures in nanoparticle-polymer composites in the form of 100 microns thin free-standing films, i.e. without sample containers or covers that could cause unwanted absorption/incoherent scattering of very-cold neutrons. Despite their large diameter of 2 cm, the flexible materials are of high optical quality and yield mirror-like reflectivity of about 90% for neutrons of 4.1 nm wavelength.
rate research
Read More
Diffraction experiments with holographic gratings recorded in SiO$_2$ nanoparticle-polymer composites have been carried out with slow neutrons. The influence of parameters such as nanoparticle concentration, grating thickness and grating spacing on the neutron-optical properties of such materials has been tested. Decay of the grating structure along the sample depth due to disturbance of the recording process becomes an issue at grating thicknesses of about 100 microns and larger. This limits the achievable diffraction efficiency for neutrons. As a solution to this problem, the Pendell{o}sung interference effect in holographic gratings has been exploited to reach a diffraction efficiency of 83% for very cold neutrons.
Diffraction of slow neutrons by nanoparticle-polymer composite gratings has been observed. By carefully choosing grating parameters such as grating thickness and spacing, a three-port beam splitter operation for cold neutrons - splitting the incident neutron intensity equally into the plus-minus first and zeroth diffraction orders - was realized. As a possible application, a Zernike three-path interferometer is briefly discussed.
We discuss the applicability of holographically recorded gratings in photopolymers and holographic polymer-dispersed liquid crystals as neutron optical elements. An experimental investigation of their properties for light and neutrons with different grating spacings and grating thicknesses is performed. The angular dependencies of the diffraction efficiencies for those gratings are interpreted in terms of a rigourous coupled wave analysis. Starting from the obtained results we work out the lines for the production of an optimised neutron optical diffraction grating, i.e., high diffraction efficiency in the Bragg diffraction regime with moderate angular selectivity.
The preparation of neutron-optical phase gratings with light-optical holography is reviewed. We compare the relevant concepts of i) Kogelniks theory for Bragg diffraction of light by thick volume gratings, which can be used to analyze holographic gratings with both light and neutrons, and ii) the dynamical theory of neutron diffraction. Without going into mathematical detail, we intend to illuminate their correspondence. The findings are illustrated by analyzing data obtained from reconstruction of nanoparticle holographic gratings with both light and neutrons.
Ferroelectric films usually have phase states and physical properties very different from those of bulk ferroelectrics. Here we propose free-standing ferroelectric-elastic multilayers as a bridge between these two material systems. Using a nonlinear thermodynamic theory, we determine phase states of such multilayers as a function of temperature, misfit strain, and volume fraction fi of ferroelectric material. The numerical calculations performed for two classical ferroelectrics - PbTiO3 and BaTiO3 - demonstrate that polarization states of multilayers in the limiting cases fi -> 0 and fi -> 1 coincide with those of thin films and bulk crystals. At intermediate volume fractions, however, the misfit strain-temperature phase diagrams of multilayers differ greatly from those of epitaxial films. Remarkably, a ferroelectric phase not existing in thin films and bulk crystals can be stabilized in BaTiO3 multilayers. Owing to additional tunable parameter and reduced clamping, ferroelectric multilayers may be superior for a wide range of device applications.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
