Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userThe s-Process in Low Metallicity Stars. II. Interpretation of High-Resolution Spectroscopic Observations with AGB models
184
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
High-resolution spectroscopic observations of a hundred metal-poor Carbon and s-rich stars (CEMP-s) collected from the literature are compared with the theoretical nucleosynthesis models of asymptotic giant branch (AGB) presented in Paper I (M = 1.3, 1.4, 1.5, 2 Msun, -3.6 < [Fe/H] < -1.5). The s-process enhancement detected in these objects is associated to binary systems: the more massive companion evolved faster through the thermally pulsing AGB phase (TP-AGB), synthesising in the inner He-intershell the s-elements, which are partly dredged-up to the surface during the third dredge-up (TDU) episode. The secondary observed low mass companion became CEMP-s by mass transfer of C and s-rich material from the primary AGB. We analyse the light elements as C, N, O, Na and Mg, as well as the two s-process indicators, [hs/ls] (where ls = <Y, Zr> is the the light-s peak at N = 50 and hs = <La, Nd, Sm> the heavy-s peak at N = 82), and [Pb/hs]. We distinguish between CEMP-s with high s-process enhancement, [hs/Fe] > 1.5 (CEMP-sII), and mild s-process enhanced stars, [hs/Fe] < 1.5 (CEMP-sI). To interpret the observations, .... . Detailed analyses for individual stars will be provided in Paper III.
rate research
Read More
We provide an individual analysis of 94 carbon enhanced metal-poor stars showing an s-process enrichment (CEMP-s) collected from the literature. The s-process enhancement observed in these stars is ascribed to mass transfer by stellar winds in a binary system from a more massive companion evolving faster toward the asymptotic giant branch (AGB) phase. The theoretical AGB nucleosynthesis models have been presented in Paper I. Several CEMP-s stars show an enhancement in both s and r-process elements (CEMP-s/r). In order to explain the peculiar abundances observed in CEMP-s/r stars, we assume that the molecular cloud from which CEMP-s formed was previously enriched in r-elements by Supernovae pollution. A general discussion and the method adopted in order to interpret the observations have been provided in Paper II. We present in this paper a detailed study of spectroscopic observations of individual stars. We consider all elements from carbon to bismuth, with particular attention to the three s-process peaks, ls (Y, Zr), hs (La, Nd, Sm) and Pb, and their ratios [hs/ls] and [Pb/hs]. The presence of an initial r-process contribution may be typically evaluated by the [La/Eu] ratio. We found possible agreements between theoretical predictions and spectroscopic data. In general, the observed [Na/Fe] (and [Mg/Fe]) provide information on the AGB initial mass, while [hs/ls] and [Pb/hs] are mainly indicators of the s-process efficiency. A range of 13C-pocket strengths is required to interpret the observations. However, major discrepancies between models and observations exist. We highlight star by star the agreements and the main problems encountered and, when possible, we suggest potential indications for further studies. These discrepancies provide starting points of debate for unsolved problems ...
A large sample of carbon enhanced metal-poor stars enriched in s-process elements (CEMP-s) have been observed in the Galactic halo. These stars of low mass (M ~ 0.9 Msun) are located on the main-sequence or the red giant phase, and do not undergo third dredge-up (TDU) episodes. The s-process enhancement is most plausibly due to accretion in a binary system from a more massive companion when on the asymptotic giant branch (AGB) phase (now a white dwarf). In order to interpret the spectroscopic observations, updated AGB models are needed to follow in detail the s-process nucleosynthesis. We present nucleosynthesis calculations based on AGB stellar models obtained with FRANEC (Frascati Raphson-Newton Evolutionary Code) for low initial stellar masses and low metallicities. For a given metallicity, a wide spread in the abundances of the s-process elements is obtained by varying the amount of 13C and its profile in the pocket, where the 13C(a, n)16O reaction is the major neutron source, releasing neutrons in radiative conditions during the interpulse phase. We account also for the second neutron source 22Ne(a, n)25Mg, partially activated during convective thermal pulses. We discuss the surface abundance of elements from carbon to bismuth, for AGB models of initial masses M = 1.3 -- 2 Msun, low metallicities ([Fe/H] from -1 down to -3.6) and for different 13C-pockets efficiencies. In particular we analyse the relative behaviour of the three s-process peaks: light-s (ls at magic neutron number N = 50), heavy-s (hs at N = 82) and lead (N = 126). Two s-process indicators, [hs/ls] and [Pb/hs], are needed in order to characterise the s-process distribution. In the online material, we provide a set of data tables with surface predictions. ...
Aims. We investigate the s-process during the AGB phase of stellar models whose cores are enforced to rotate at rates consistent with asteroseismology observations of their progenitors and successors. Methods. We calculated new 2M$_{odot}$, Z=0.01 models, rotating at 0, 125, and 250 km/s at the start of main sequence. An artificial, additional viscosity was added to enhance the transport of angular momentum in order to reduce the core rotation rates to be in agreement with asteroseismology observations. We compared rotation rates of our models with observed rotation rates during the MS up to the end of core He burning, and the white dwarf phase. Results. We present nucleosynthesis calculations for these rotating AGB models that were enforced to match the asteroseismic constraints on rotation rates of MS, RGB, He-burning, and WD stars. In particular, we calculated one model that matches the upper limit of observed rotation rates of core He-burning stars and we also included a model that rotates one order of magnitude faster than the upper limit of the observations. The s-process production in both of these models is comparable to that of non-rotating models. Conclusions. Slowing down the core rotation rate in stars to match the above mentioned asteroseismic constraints reduces the rotationally induced mixing processes to the point that they have no effect on the s-process nucleosynthesis. This result is independent of the initial rotation rate of the stellar evolution model. However, there are uncertainties remaining in the treatment of rotation in stellar evolution, which need to be reduced in order to confirm our conclusions, including the physical nature of our approach to reduce the core rotation rates of our models, and magnetic processes.
Context. Rotation is known to affect the nucleosynthesis of light elements in massive stars, mainly by rotation-induced mixing. In particular, rotation boosts the primary nitrogen production. Models of rotating stars are able to reproduce the nitrogen observed in low-Z halo stars. Aims. Here we present the first grid of stellar models for rotating massive stars at low Z, where a full s-process network is used to study the impact of rotation-induced mixing on the nucleosynthesis of heavy elements. Methods. We used the Geneva stellar evolution code that includes an enlarged reaction network with nuclear species up to bismuth to calculate 25 M$_odot$ models at three different Z and with different initial rotation rates. Results. First, we confirm that rotation-induced mixing leads to a production of primary $^{22}$Ne, which is the main neutron source for the s process in massive stars. Therefore rotation boosts the s process in massive stars at all Z. Second, the neutron-to-seed ratio increases with decreasing Z in models including rotation, which leads to the complete consumption of all iron seeds at Z < 1e-3 by the end of core He-burning. Thus at low Z, the iron seeds are the main limitation for this boosted s process. Third, as Z decreases, the production of elements up to the Ba peak increases at the expense of the elements of the Sr peak. We studied the impact of the initial rotation rate and of the uncertain $^{17}$O$(alpha,gamma)$ rate (which strongly affects the neutron poison strength of $^{16}$O) on our results. This study shows that rotating models can produce significant amounts of elements up to Ba over a wide range of Z. Fourth, compared to the He-core, the primary $^{22}$Ne production in the He-shell is even higher (> 1% in mass fraction at all Z), which could open the door for an explosive neutron capture nucleosynthesis in the He-shell, with a primary neutron source.
Among Carbon-Enhanced Metal-Poor (CEMP) stars, some are found to be enriched in s-process elements (CEMP-s), in r-process elements (CEMP-r) or in both s- and r-process elements (CEMP-rs). The origin of the abundance differences between CEMP-s and CEMP-rs stars is presently unknown. It has been claimed that the i-process, whose site still remains to be identified, could better reproduce CEMP-rs abundances than the s-process. We analyze high-resolution spectra of 25 metal-poor stars, observed with the high-resolution HERMES spectrograph mounted on the Mercator telescope, La Palma, or with the UVES/VLT and HIRES/KECK spectrographs. We propose a new, robust classification method for CEMP-s and CEMP-rs stars using eight heavy element abundances. The abundance profiles of CEMP-s and CEMP-rs stars are derived and there appears to be an abundance continuum between the two stellar classes. CEMP-rs stars present most of the characteristics of extrinsic stars such as CEMP-s, CH, Barium and extrinsic S stars, with an even larger binarity rate among CEMP-rs stars than among CEMP-s stars. Stellar evolutionary tracks of an enhanced carbon composition (consistent with our abundance determinations) are necessary to explain the position of CEMP-s and CEMP-rs stars in the HR diagram using Gaia DR2 parallaxes; they are found to lie mostly on the RGB. CEMP-rs stars can be explained as being polluted by a low-mass, low-metallicity TP-AGB companion experiencing i-process nucleosynthesis after proton ingestion during its first convective thermal pulses. The global fitting of our i-process models to CEMP-rs stars is as good as the one of our s-process models to CEMP-s stars. As such, CEMP-rs stars could be renamed as CEMP-sr stars, since they represent a particular manifestation of the s-process at low-metallicities. For these objects a call for an exotic i-process site may not necessarily be required anymore.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
