Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userUltrathin BaTiO3 templates for multiferroic nanostructures
165
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Structural, electronic and dielectric properties of high-quality ultrathin BaTiO3 films are investigated. The films, which are grown by ozone-assisted molecular beam epitaxy on Nb-doped SrTiO3 (001) substrates and having thicknesses as thin 8 unit cells (3.2 nm), are unreconstructed and atomically smooth with large crystalline terraces. A strain-driven transition to 3D island formation is observed for films of of 13 unit cells thickness (5.2 nm). The high structural quality of the surfaces, together with the dielectric properties similar to bulk BaTiO3 and dominantly TiO2 surface termination, make these films suitable templates for the synthesis of high-quality metal-oxide multiferroic heterostructures for the fundamental study and exploitation of magneto-electric effects, such as a recently proposed interface effect in Fe/BaTiO3 heterostructures based on Fe-Ti interface bonds.
rate research
Read More
Some of the Multiferroics [1] form a rare class of materials that exhibit magnetoelectric coupling arising from the coexistence of ferromagnetism and ferroelectricity, with potential for many technological applications.[2,3] Over the last decade, an active research on multiferroics has resulted in the identification of a few routes that lead to multiferroicity in bulk materials.[4-6] While ferroelectricity in a classic ferroelectric such as BaTiO3 is expected to diminish with the reducing particle size,[7,8] ferromagnetism cannot occur in its bulk form.[9] Here, we use a combination of experiment and first-principles simulations to demonstrate that multiferroic nature emerges in intermediate size nanocrystalline BaTiO3, ferromagnetism arising from the oxygen vacancies at the surface and ferroelectricity from the core. A strong coupling between a surface polar phonon and spin is shown to result in a magnetocapacitance effect observed at room temperature, which can open up possibilities of new electro-magneto-mechanical devices at the nano-scale.
Thickness-dependence of coercive field (EC) was investigated in ultrathin BaTiO3 capacitors with thicknesses (d) between 30 and 5 nm. The EC appears nearly independent of d below 15 nm, and decreases slowly as d increases above 15 nm. This behavior cannot be explained by extrinsic effects, such as interfacial passive layers or strain relaxation, nor by homogeneous domain models. Based on domain nuclei formation model, the observed EC behavior is explainable via a quantitative level. A crossover of domain shape from a half-prolate spheroid to a cylinder is also suggested at d~ 15 nm, exhibiting good agreement with experimental results.
Analytical expressions for the magnetoelastic anisotropy constants of cubic magnetic systems are derived for rectangular and oblique distortions originating from epitaxial growth on substrates with lower crystal symmetry. In particular, the temperature variation of the magnetic properties of magnetic films grown on barium titanate (BaTiO3) substrates are explained in terms of strain-induced magnetic anisotropies caused by the temperature dependent phase transitions of BaTiO3. Our results quantify the experimental observations in ferromagnet/bto-based structures, which have been proposed as templates for magnetoelectric composite heterostructures.
The quantitative understanding of converse magnetoelectric effects, i.e., the variation of the magnetization as a function of an applied electric field, in extrinsic multiferroic hybrids is a key prerequisite for the development of future spintronic devices. We present a detailed study of the strain-mediated converse magnetoelectric effect in ferrimagnetic Fe3O4 thin films on ferroelectric BaTiO3 substrates at room temperature. The experimental results are in excellent agreement with numerical simulation based on a two-region model. This demonstrates that the electric field induced changes of the magnetic state in the Fe3O4 thin film can be well described by the presence of two different ferroelastic domains in the BaTiO3 substrate, resulting in two differently strained regions in the Fe3O4 film with different magnetic properties. The two-region model allows to predict the converse magnetoelectric effects in multiferroic hybrid structures consisting of ferromagnetic thin films on ferroelastic substrates.
Perovskite ferroelectric oxides are usually considered to be brittle materials, however, recent work [Dong et al., Science 366, 475 (2019)] demonstrated the super-elasticity in the freestanding BaTiO3 thin films. This property may originate from the ferroelectric domain evolution during the bending, which is difficult to observe in experiments. Therefore, understanding the relation among the bending deformation, thickness of the films, and the domain dynamics is critical for their potential applications in flexible ferroelectric devices. Here, we reported the dynamics of ferroelectric polarization in the freestanding BaTiO3 ultrathin films in the presence of large bending deformation up to 40{deg} using phase-field simulation. The ferroelectric domain evolution reveals the transition from the flux-closure to a/c domains with vortex-like structures, which caused by the increase of out-of-plane ferroelectric polarization. Additionally, by varying the film thickness in the identical bending situation, we found the a/c phase with vortex-like structure emerges only as the film thickness reached 12 nm or higher. Results from our investigations provide instructive information for the microstructure evolution of bending ferroelectric perovskite oxide films, which could serve as guide for the future application of ferroelectric films on flexible electronic devices.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
