Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userThickness-Dependent Morphologies of Gold on N-Layer Graphenes
71
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We report that gold thermally deposited onto n-layer graphenes interacts differently with these substrates depending on the number layer, indicating the different surface properties of graphenes. This results in thickness-dependent morphologies of gold on n-layer graphenes, which can be used to identify and distinguish graphenes with high throughput and spatial resolution. This technique may play an important role in checking if n-layer graphenes are mixed with different layer numbers of graphene with a smaller size, which cannot be found by Raman spectra. The possible mechanisms for these observations are discussed.
rate research
Read More
The electronic properties of few-layer graphene grown on the carbon-face of silicon carbide (SiC) are found to be strongly dependent on the number of layers. The carrier mobility is larger in thicker graphene because substrate-related scattering is reduced in the higher layers. The carrier density dependence of the mobility is qualitatively different in thin and thick graphene, with the transition occurring at about 2 layers. The mobility increases with carrier density in thick graphene, similar to multi-layer graphene exfoliated from natural graphite, suggesting that the individual layers are still electrically coupled in spite of reports recording non-Bernal stacking order in C-face grown graphene. The Hall coefficient peak value is reduced in thick graphene due to the increased density of states. A reliable and rapid characterization tool for the layer number is therefore highly desirable. To date, AFM height determination and Raman scattering are typically used since the optical contrast of graphene on SiC is weak. However, both methods suffer from low throughput. We show that the scanning electron microscopy (SEM) contrast can give similar results with much higher throughput.
We study the solvation and electrostatic properties of bare gold (Au) nanoparticles (NPs) of $1$-$2$ nm in size in aqueous electrolyte solutions of sodium salts of various anions with large physicochemical diversity (Cl$^-$, BF$_4$$^-$, PF$_6$$^-$, Nip$^-$(nitrophenolate), 3- and 4-valent hexacyanoferrate (HCF)) using nonpolarizable, classical molecular dynamics computer simulations. We find a substantial facet selectivity in the adsorption structure and spatial distribution of the ions at the Au-NPs: while sodium and some of the anions (e.g., Cl$^-$, HCF$^{3-}$) adsorb more at the `edgy (100) and (110) facets of the NPs, where the water hydration structure is more disordered, other ions (e.g., BF$_4$$^-$, PF$_6$$^-$, Nip$^-$) prefer to adsorb strongly on the extended and rather flat (111) facets. In particular, Nip$^-$, which features an aromatic ring in its chemical structure, adsorbs strongly and perturbs the first water monolayer structure on the NP (111) facets substantially. Moreover, we calculate adsorptions, radially-resolved electrostatic potentials, as well as the far-field effective electrostatic surface charges and potentials by mapping the long-range decay of the calculated electrostatic potential distribution onto the standard Debye-Huckel form. We show how the extrapolation of these values to other ionic strengths can be performed by an analytical Adsorption-Grahame relation between effective surface charge and potential. We find for all salts negative effective surface potentials in the range from $-10$ mV for NaCl down to about $-80$ mV for NaNip, consistent with typical experimental ranges for the zeta-potential. We discuss how these values depend on the surface definition and compare them to the explicitly calculated electrostatic potentials near the NP surface, which are highly oscillatory in the $pm 0.5$ V range.
The surface potential and the efficiency of interfacial charge transfer are extremely important for designing future semiconductor devices based on the emerging two-dimensional (2D) phosphorene. Here, we directly measured the strongly layer-dependent surface potential of mono- and few-layer phosphorene on gold, which confirms with the reported theoretical prediction. At the same time, we used an optical way - photoluminescence (PL) spectroscopy to probe the charge transfer in phosphorene-gold hybrid system. We firstly observed highly anisotropic and layer-dependent PL quenching in the phosphorene-gold hybrid system, which is attributed to the highly anisotropic/layer-dependent interfacial charge transfer.
Room temperature two-dimensional (2D) ferromagnetism is highly desired in practical spintronics applications. Recently, 1T phase CrTe2 (1T-CrTe2) nanosheets with five and thicker layers have been successfully synthesized, which all exhibit the properties of ferromagnetic (FM) metals with Curie temperatures around 305 K. However, whether the ferromagnetism therein can be maintained when continuously reducing the nanosheets thickness to monolayer limit remains unknown. Here, through first-principles calculations, we explore the evolution of magnetic properties of 1 to 6 layers CrTe2 nanosheets and several interesting points are found: First, unexpectedly, monolayer CrTe2 prefers a zigzag antiferromagnetic (AFM) state with its energy much lower than that of FM state. Second, in 2 to 4 layers CrTe2, both the intralayer and interlayer magnetic coupling are AFM. Last, when the number of layers is equal to or greater than five, the intralayer and interlayer magnetic coupling become FM. Theoretical analysis reveals that the in-plane lattice contraction of few layer CrTe2 compared to bulk is the main factor producing intralayer AFM-FM magnetic transition. At the same time, as long as the intralayer coupling gets FM, the interlayer coupling will concomitantly switch from AFM to FM. Such highly thickness dependent magnetism provides a new perspective to control the magnetic properties of 2D materials.
Growth, electronic and magnetic properties of $gamma$-Fe$_{4}$N atomic layers on Cu(001) are studied by scanning tunneling microscopy/spectroscopy and x-ray absorption spectroscopy/magnetic circular dichroism. A continuous film of ordered trilayer $gamma$-Fe$_{4}$N is obtained by Fe deposition under N$_{2}$ atmosphere onto monolayer Fe$_{2}$N/Cu(001), while the repetition of a bombardment with 0.5 keV N$^{+}$ ions during growth cycles results in imperfect bilayer $gamma$-Fe$_{4}$N. The increase in the sample thickness causes the change of the surface electronic structure, as well as the enhancement in the spin magnetic moment of Fe atoms reaching $sim$ 1.4 $mu_{mathrm B}$/atom in the trilayer sample. The observed thickness-dependent properties of the system are well interpreted by layer-resolved density of states calculated using first principles, which demonstrates the strongly layer-dependent electronic states within each surface, subsurface, and interfacial plane of the $gamma$-Fe$_{4}$N atomic layers on Cu(001).
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
