Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userFeedback from central black holes in elliptical galaxies. II: Can purely mechanical energy feedback models work?
122
0
0.0
(
0
)
Authors
Min-Su Shin
Ask ChatGPT about the research
No Arabic abstract
By using high-resolution 1D hydrodynamical simulations, we investigate the effects of purely mechanical feedback from super massive black holes (SMBHs) in the evolution of elliptical galaxies for a broad range of feedback efficiencies and compare the results to four major observational constraints. In particular, we focus on 1) the central black hole to stellar mass ratio of the host galaxy, 2) the lifetime of the luminous quasar phase, 3) the mass of stars formed in the host galaxy within the last Gyr, and 4) the X-ray luminosity of the hot diffuse gas. As a result, we try to pin down the most successful range of mechanical feedback efficiencies. We find that while low feedback efficiencies result in too much growth of the SMBH, high efficiencies totally blow out the hot interstellar gas, and the models are characterized by very low thermal X-ray luminosity well below the observed range. The net lifetime of the quasar phase is strongly coupled to the mass ratio between SMBH and its host galaxy, while the X-ray luminosity is generally correlated to the recent star formation within the last Gyr. When considering the popularly adopted model of the constant feedback efficiency, the feedback energy deposited into the ambient medium should be more than 0.01% of the SMBH accretion energy to be consistent with the SMBH mass to stellar mass ratio in the local universe. Yet, the X-ray luminosity of the hot gas favors about 0.005% of the accretion energy as the mechanical AGN feedback energy. We conclude that the purely mechanical feedback mode is unlikely to be simultaneously compatible with all four observable tests, even allowing a broad range of feedback efficiencies, and that including both radiative and mechanical feedback together may be a solution to comply the observational constraints. [abridged]
rate research
Read More
We find, from high-resolution hydro simulations, that winds from AGN effectively heat the inner parts (~100 pc) of elliptical galaxies, reducing infall to the central SMBH; and radiative (photoionization and X-ray) heating reduces cooling flows at the kpc scale. Including both types of feedback with (peak) efficiencies of 3 10^{-4} < epsilon_mech < 10^{-3} and of epsilon_rad ~10^{-1.3} respectively, produces systems having duty-cycles, central SMBH masses, X-ray luminosities, optical light profiles, and E+A spectra in accord with the broad suite of modern observations of massive elliptical systems. Our main conclusion is that mechanical feedback (including all three of energy, momentum and mass) is necessary but the efficiency, based on several independent arguments must be a factor of 10 lower than is commonly assumed. Bursts are frequent at z>1 and decline in frequency towards the present epoch as energy and metal rich gas are expelled from the galaxies into the surrounding medium. For a representative galaxy of final stellar mass ~3 10^{11} Msun, roughly 3 10^{10} Msun of recycled gas has been added to the ISM since z~2 and, of that, roughly 63% has been expelled from the galaxy, 19% has been converted into new metal rich stars in the central few hundred parsecs, and 2% has been added to the central SMBH, with the remaining 16% in the form hot X-ray emitting ISM. The bursts occupy a total time of ~170 Myr, which is roughly 1.4% of the available time. Of this time, the central SMBH would be seen as an UV or optical source for ~45% and ~71$% of the time, respectively. Restricting to the last 8.5 Gyr, the burst occupy ~44 Myr, corresponding to a fiducial duty-cycle of ~5 10^{-3}.
The importance of the radiative feedback from SMBHs at the centers of elliptical galaxies is not in doubt, given the well established relations among electromagnetic output, black hole mass and galaxy optical luminosity. In addition, feedback due to mechanical and thermal deposition of energy from jets and winds emitted by the accretion disk around the central SMBH is also expected to occur. In this paper we improve and extend the accretion and feedback physics explored in our previous papers to include also a physically motivated mechanical feedback. We study the evolution of an isolated elliptical galaxy with the aid of a high-resolution 1-D hydrodynamical code, where the cooling and heating functions include photoionization and Compton effects, and restricting to models which include only radiative or only mechanical feedback. We confirm that for Eddington ratios above 0.01 both the accretion and radiative output are forced by feedback effects to be in burst mode, so that strong intermittencies are expected at early times, while at low redshift the explored models are characterized by smooth, very sub-Eddington mass accretion rates punctuated by rare outbursts. However, the explored models always fail some observational tests. If we assume the high mechanical efficiency of 10^{-2.3}, we find that most of the gas is ejected from the galaxy, the resulting X-ray luminosity is far less than is typically observed and little SMBH growth occurs. But models with low enough mechanical efficiency to accomodate satisfactory SMBH growth tend to allow too strong cooling flows and leave galaxies at z=0 with E+A spectra more frequently than is observed. We conclude that both types of feedback are required. Models with combined feedback are explored in a forthcoming paper [abridged]
An extraordinary recent development in astrophysics was the discovery of the fossil relationship between central black hole mass and the stellar mass of galactic bulges. The physical process underpinning this relationship has become known as feedback. The Chandra X-ray Observatory was instrumental in realizing the physical basis for feedback, by demonstrating a tight coupling between the energy released by supermassive black holes and the gaseous structures surrounding them. This white paper discusses how a great leap forward in X-ray collecting area and spectral resolution will allow a qualitatively new way of studying how feedback from black holes influenced the growth of structure.
We study the effect of AGN mechanical and radiation feedback on the formation of bulge dominated galaxies via mergers of disc galaxies. The merging galaxies have mass-ratios of 1:1 to 6:1 and include pre-existing hot gaseous halos to properly account for the global impact of AGN feedback. Using smoothed particle hydrodynamics simulation code (GADGET-3) we compare three models with different AGN feedback models: (1) no black hole and no AGN feedback; (2) thermal AGN feedback; and (3) mechanical and radiative AGN feedback. The last model is motivated by observations of broad line quasars which show winds with initial velocities of $v_w ge$ 10,000 km/s and also heating associated with the central AGN X-ray radiation. The primary changes in gas properties due to mechanical AGN feedback are lower thermal X-ray luminosity from the final galaxy - in better agreement with observations - and galactic outflows with higher velocity $sim 1000$ km/s similar to recent direct observations of nearby merger remnants. The kinetic energy of the outflowing gas is a factor of $sim$ 20 higher than in the thermal feedback case. All merger remnants with momentum-based AGN feedback with $v_w sim 10,000$ km/s and $epsilon_w=2 times 10^{-3}$, independent of their progenitor mass-ratios, reproduce the observed relations between stellar velocity dispersion and black hole mass ($M_{rm bh} - sigma$) as well as X-ray luminosity ($L_X - sigma$) with $10^{37.5}$ erg/s $lesssim L_X (0.3-8~{rm keV}) lesssim 10^{39.2}$ erg/s for velocity dispersions in the range of 120 km/s $lesssim sigma lesssim$ 190 km/s. In addition, the mechanical feedback produces a much greater AGN variability. We also show that gas is more rapidly and impulsively stripped from the galactic centres driving a moderate increase in galaxy size and decrease in central density with the mechanical AGN feedback model.
Davies et al. (2019) established that for L^* galaxies the fraction of baryons in the circumgalactic medium (CGM) is inversely correlated with the mass of their central supermassive black holes (BHs) in the EAGLE hydrodynamic simulation. The interpretation is that, over time, a more massive BH has provided more energy to transport baryons beyond the virial radius, which additionally reduces gas accretion and star formation. We continue this research by focusing on the relationship between the 1) BH masses, 2) physical and observational properties of the CGM, and 3) galaxy colours for Milky Way-mass systems. The ratio of the cumulative BH feedback energy over the gaseous halo binding energy is a strong predictor of the CGM gas content, with BHs injecting >~10x the binding energy resulting in gas-poor haloes. Observable tracers of the CGM, including CIV, OVI, and HI absorption line measurements, are found to be effective tracers of the total z~0 CGM halo mass. We use high-cadence simulation outputs to demonstrate that BH feedback pushes baryons beyond the virial radius within 100 Myr timescales, but that CGM metal tracers take longer (0.5-2.5 Gyr) to respond. Secular evolution of galaxies results in blue, star-forming or red, passive populations depending on the cumulative feedback from BHs. The reddest quartile of galaxies with M_*=10^{10.2-10.7} M_solar (median u-r = 2.28) has a CGM mass that is 2.5x lower than the bluest quartile (u-r=1.59). We propose strategies for observing the predicted lower CGM column densities and covering fractions around galaxies hosting more massive BHs using the Cosmic Origins Spectrograph on Hubble.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
