Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userEfficient generation of >2 W of green light by single pass frequency doubling in PPMgLN
85
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We report 32% efficient frequency doubling of single frequency 1029 nm light to green light at 514.5 nm using a single pass configuration. A congruent composition, periodically poled magnesium doped lithium niobate (PPMgLN) crystal of 50 mm length was used to generate a second harmonic power of 2.3 W. To our knowledge, this is the highest reported frequency doubling efficiency of any wavelength light in a PPMgLN crystal and also the highest reported SHG output power in the green for PPMgLN.
rate research
Read More
Thin-film lithium niobate (TFLN) is superior for integrated nanophotonics due to its outstanding properties in nearly all aspects: strong second-order nonlinearity, fast and efficient electro-optic effects, wide transparency window, and little two photon absorption and free carrier scattering. Together, they permit highly integrated nanophotonic circuits capable of complex photonic processing by incorporating disparate elements on the same chip. Yet, there has to be a demonstration that synergizes those superior properties for system advantage. Here we demonstrate such a chip that capitalizes on TFLNs favorable ferroelectricity, high second-order nonlinearity, and strong electro-optic effects. It consists of a monolithic circuit integrating a Z-cut, quasi-phase matched microring with high quality factor and a phase modulator used in active feedback control. By Pound-Drever-Hall locking, it realizes stable frequency doubling at about 50% conversion with only milliwatt pump, marking the highest by far among all nanophotonic platforms with milliwatt pumping. Our demonstration addresses a long-outstanding challenge facing cavity-based optical processing, including frequency conversion, frequency comb generation, and all-optical switching, whose stable performance is hindered by photorefractive or thermal effects. Our results further establish TFLN as an excellent material capable of optical multitasking, as desirable to build multi-functional chip devices.
Frequency pulling is a well-known phenomenon in standard laser physics, leading to a shift of the laser frequency when the cavity and maximum gain frequencies are detuned. In this letter we present the first experimental demonstration of frequency pulling in single-pass free-electron lasers. Measurements are performed using the single-pass free-electron laser installed on the Elettra storage ring.
In second harmonic generation, the phase of the optical field is doubled which has important implication. Here the phase doubling effect is utilized to solve a long-standing challenge in power scaling of single frequency laser. When a (-{pi}/2, {pi}/2) binary phase modulation is applied to a single frequency seed laser to broaden the spectrum and suppress the stimulated Brillouin scattering in high power fiber amplifier, the second harmonic of the phase-modulated laser will return to single frequency, because the (-{pi}/2, {pi}/2) modulation is doubled to (-{pi}, {pi}) for the second harmonic. A compression rate as high as 95% is demonstrated in the experiment limited by the electronic bandwidth of the setup, which can be improved with optimized devices.
We report on efficient nonlinear generation of ultrafast, higher order perfect vortices at the green wavelength. Based on Fourier transformation of the higher order Bessel-Gauss beam generated through the combination of spiral phase plate and axicon we have transformed the Gaussian beam of the ultrafast Yb-fiber laser at 1060 nm into perfect vortices of power 4.4 W and order up to 6. Using single-pass second harmonic generation (SHG) of such vortices in 5-mm long chirped MgO-doped, periodically poled congruent LiNbO$_3$ crystal we have generated perfect vortices at green wavelength with output power of 1.2 W and vortex order up to 12 at single-pass conversion efficiency of 27% independent of its order. This is the highest single-pass SHG efficiency of any optical beams other than Gaussian beams. Unlike the disintegration of higher order vortices in birefringent crystals, here, the use of quasi-phase matching process enables generation of high quality vortices even at higher orders. The green perfect vortices of all orders have temporal and spectral width of 507 fs and 1.9 nm, respectively corresponding to a time-bandwidth product of 1.02.
Kerr soliton frequency comb generation in monolithic microresonators recently attracted great interests as it enables chip-scale few-cycle pulse generation at microwave rates with smooth octave-spanning spectra for self-referencing. Such versatile platform finds significant applications in dual-comb spectroscopy, low-noise optical frequency synthesis, coherent communication systems, etc. However, it still remains challenging to straightforwardly and deterministically generate and sustain the single-soliton state in microresonators. In this paper, we propose and theoretically demonstrate the excitation of single-soliton Kerr frequency comb by seeding the continuous-wave driven nonlinear microcavity with a pulsed trigger. Unlike the mostly adopted frequency tuning scheme reported so far, we show that an energetic single shot pulse can trigger the single-soliton state deterministically without experiencing any unstable or chaotic states. Neither the pump frequency nor the cavity resonance is required to be tuned. The generated mode-locked single-soliton Kerr comb is robust and insensitive to perturbations. Even when the thermal effect induced by the absorption of the intracavity light is taken into account, the proposed single pulse trigger approach remains valid without requiring any thermal compensation means.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
