Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userRoom-temperature magnetocaloric effect in La0.7Sr0.3Mn1-xMxO3 (M=Al, Ti)
222
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Magnetic entropy and adiabatic temperature changes in and above the room-temperature region has been measured for La0.7Sr0.3Mn1-xMxO3 (M = Al, Ti) by means of magnetization and heat capacity measurements in magnetic fields up to 6 T. The magnetocaloric effect becomes largest at the ferromagnetic ordering temperature Tc that is tuned to ~300 K by the substitution of Al or Ti for Mn. While the substitution of Al for Mn drastically reduces the entropy change, it extends considerably the working temperature span and improves the relative cooling power. The magnetocaloric effect seems to be only lightly affected by Ti substitution. Although manganites have been considered potential for magnetic refrigerants, the magnetocaloric effect in these materials is limited due to the existence of short-range ferromagnetic correlations above Tc.
rate research
Read More
We investigate the magnetocaloric effect (MCE), relative cooling power (RCP) and crystalline structure in Sb substituted CrTe_{1-x}Sb_{x} (0 leq x leq 0.2) alloy. The Rietveld refinement of the XRD pattern of CrTe1-xSbx showed the emerging of pure hexagonal NiAs structure with P63/mmc (194) space group with increasing Sb substitution. We detect a slight increase in the basal plane a-lattice parameter, with a much larger reduction in the c-axis. Magnetic isotherms were measured in the temperature range of 50-400K. The results revealed an increase in the maximum entropy change |S_{M}(T,H)| with Sb-substitutions in the temperature range (~285-325K). Moreover, The RCP values increased by about 33% with 20% Sb substitutions. These findings suggest that CrTe_{1-x}Sb_{x} alloys can be used in room temperature magnetic cooling at fraction of the coast of pure Gd element the porotype magnetic material for magnetic refrigeration.
We compute the magnetocaloric effect (MCE) in the GdTX (T=Sc, Ti, Co, Fe; X=Si, Ge) compounds as a function of the temperature and the external magnetic field. To this end we use a density functional theory approach to calculate the exchange-coupling interactions between Gd$^{3+}$ ions on each compound. We consider a simplified magnetic Hamiltonian and analyze the dependence of the exchange couplings on the transition metal T, the p-block element X, and the crystal structure (CeFeSi-type or CeScSi-type). The most significant effects are observed for the replacements Ti $to$ Sc or Fe $to$ Co which have an associated change in the parity of the electron number in the 3d level. These replacements lead to an antiferromagnetic contribution to the magnetic couplings that reduces the Curie temperature and can even lead to an antiferromagnetic ground state. We solve the magnetic models through mean field and Monte Carlo calculations and find large variations among compounds in the magnetic transition temperature and in the magnetocaloric effect, in agreement with the available experimental data. The magnetocaloric effect shows a universal behavior as a function of temperature and magnetic field in the ferromagnetic compounds after a scaling of the relevant energy scales by the Curie temperature $T_C$.
The terahertz (THz) frequency range (0.1-10 THz) fills the gap between the microwave and optical parts of the electromagnetic spectrum. Recent progress in the generation and detection of the THz radiation has made it a powerful tool for fundamental research and resulted in a number of applications. However, some important components necessary to effectively manipulate THz radiation are still missing. In particular, active polarization and phase control over a broad THz band would have major applications in science and technology. It would, e.g., enable high-speed modulation for wireless communications and real-time chiral structure spectroscopy of proteins and DNA. In physics, this technology can be also used to precisely measure very weak Faraday and Kerr effects, as required, for instance, to probe the electrodynamics of topological insulators. Phase control of THz radiation has been demonstrated using various approaches. They depend either on the physical dimensions of the phase plate (and hence provide a fixed phase shift) or on a mechanically controlled time delay between optical pulses (and hence prevent fast modulation). Here, we present data that demonstrate the room temperature giant Faraday effect in HgTe can be electrically tuned over a wide frequency range (0.1-1 THz). The principle of operation is based on the field effect in a thin HgTe semimetal film. These findings together with the low scattering rate in HgTe open a new approach for high-speed amplitude and phase modulation in the THz frequency range.
Giant magnetocaloric effect is widely achieved in hexagonal MnMX-based (M = Co or Ni, X = Si or Ge) ferromagnets at their first-order magnetostructural transition. However, the thermal hysteresis and the low sensitivity of the magnetostructural transition to the magnetic field inevitably lead to a sizeable irreversibility of the low-field magnetocaloric effect. In this work, we show an alternative way to realize a reversible low-field magnetocaloric effect in MnMX-based alloys by taking advantage of the second-order phase transition. With introducing Cu into Co in MnCoGe alloy, the martensitic transition is stabilized at high temperature, while the Curie temperature of the orthorhombic phase is reduced to room temperature. As a result, a second-order magnetic transition with negligible thermal hysteresis and a large magnetization change can be observed, enabling a large reversible magnetocaloric effect. By both calorimetric and direct measurements, a reversible adiabatic temperature change of about 1 K is obtained under a field change of 0-1 T at 304 K, which is larger than that obtained in a first-order magnetostructural transition. To get a better insight into the origin of these experimental results, first-principles calculations are carried out to characterize the chemical bonds and the magnetic exchange interaction. Our work provides a new understanding of the MnCoGe alloy and indicates a feasible route to improve the reversibility of the low-field magnetocaloric effect in the MnMX system.
The compounds, PrCo9Si4 and NdCo9Si4, have been recently reported to exhibit first-order ferromagnetic transitions near 24 K. We have subjected this compound for further characterization by magnetization, heat-capacity and electrical resistivity measurements at low temperatures in the presence of magnetic fields, particularly to probe magnetocaloric effect and magnetoresistance. The compounds are found to exhibit rather modest magnetocaloric effect at low temperatures peaking at Curie temperature, tracking the behavior of magnetoresistance. The magnetic transition does not appear to be first order in its character.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
