اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدMitigation of seismic waves: metabarriers and metafoundations bench tested
79
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The article analyses two potential metamaterial designs, the metafoundation and the metabarrier, capable to attenuate seismic waves on buildings or structural components in a frequency band between 3.5 to 8 Hz. The metafoundation serves the dual purpose of reducing the seismic response and supporting the superstructure. Conversely the metabarrier surrounds and shields the structure from incoming waves. The two solutions are based on a cell layout of local resonators whose dynamic properties are tuned using finite element simulations combined with Bloch-Floquet boundary conditions. To enlarge the attenuation band, a graded design where the resonant frequency of each cell varies spatially is employed. If appropriately enlarged or reduced, the metamaterial designs could be used to attenuate lower frequency seismic waves or groundborne vibrations respectively. A sensitivity analysis over various design parameters including size, number of resonators, soil type and source directivity, carried out by computing full 3D numerical simulations in time domain for horizontal shear waves is proposed. Overall, the metamaterial solutions discussed here can reduce the spectral amplification of the superstructure between approx. 15 to 70% depending on several parameters including the metastructure size and the properties of the soil. Pitfalls and advantages of each configuration are discussed in detail. The role of damping, crucial to avoid multiple resonant coupling, and the analogies between graded metamaterials and tuned mass dampers is also investigated.
قيم البحث
اقرأ أيضاً
We report an empirical determination of the probability density functions $P_{text{data}}(r)$ of the number $r$ of earthquakes in finite space-time windows for the California catalog. We find a stable power law tail $P_{text{data}}(r) sim 1/r^{1+mu}$
with exponent $mu approx 1.6$ for all space ($5 times 5$ to $20 times 20$ km$^2$) and time intervals (0.1 to 1000 days). These observations, as well as the non-universal dependence on space-time windows for all different space-time windows simultaneously, are explained by solving one of the most used reference model in seismology (ETAS), which assumes that each earthquake can trigger other earthquakes. The data imposes that active seismic regions are Cauchy-like fractals, whose exponent $delta =0.1 pm 0.1$ is well-constrained by the seismic rate data.
Using the standard ETAS model of triggered seismicity, we present a rigorous theoretical analysis of the main statistical properties of temporal clusters, defined as the group of events triggered by a given main shock of fixed magnitude m that occurr
ed at the origin of time, at times larger than some present time t. Using the technology of generating probability function (GPF), we derive the explicit expressions for the GPF of the number of future offsprings in a given temporal seismic cluster, defining, in particular, the statistics of the clusters duration and the clusters offsprings maximal magnitudes. We find the remarkable result that the magnitude difference between the largest and second largest event in the future temporal cluster is distributed according to the regular Gutenberg-Richer law that controls the unconditional distribution of earthquake magnitudes. For earthquakes obeying the Omori-Utsu law for the distribution of waiting times between triggering and triggered events, we show that the distribution of the durations of temporal clusters of events of magnitudes above some detection threshold u has a power law tail that is fatter in the non-critical regime $n<1$ than in the critical case n=1. This paradoxical behavior can be rationalised from the fact that generations of all orders cascade very fast in the critical regime and accelerate the temporal decay of the cluster dynamics.
Previous studies of precariously balanced objects in seismically active regions provide important information for aseismatic engineering and theoretical seismology. They are almost founded on an oversimplified assumption: any 3-dimensional (3D) actua
l object with special symmetry could be regarded as a 2D finite object in light of the corresponding symmetry. To gain an actual evolution of precariously balanced objects subjected to various levels of ground accelerations, a 3D investigation should be performed. In virtue of some reasonable works from a number of mechanicians, we derive three resultant second-order ordinary differential equations determine the evolution of 3D responses. The new dynamic analysis is following the 3D rotation of a rigid body around a fixed point. A computer program for numerical solution of these equations is also developed to simulate the rocking and rolling response of axisymmetric objects to various levels of ground accelerations. It is shown that the 2D and 3D estimates on the minimum overturning acceleration of a cylinder under the same sets of half- and full-sine-wave pulses are almost consistent except at several frequency bonds. However, we find that the 2D and 3D responses using the actual seismic excitation have distinct differences, especially to north-south (NS) and up-down (UD) components. In this work the chosen seismic wave is the El Centro recording of the 18 May 1940 Imperial Valley Earthquake. The 3D outcome does not seem to support the 2D previous result that the vertical component of the ground acceleration is less important than the horizontal ones. We conclude that the 2D dynamic modeling is not always reliable.
During the past two decades, the use of ambient vibrations for modal analysis of structures has increased as compared to the traditional techniques (forced vibrations). The Frequency Domain Decomposition method is nowadays widely used in modal analys
is because of its accuracy and simplicity. In this paper, we first present the physical meaning of the FDD method to estimate the modal parameters. We discuss then the process used for the evaluation of the building stiffness deduced from the modal shapes. The models considered here are 1D lumped-mass beams and especially the shear beam. The analytical solution of the equations of motion makes it possible to simulate the motion due to a weak to moderate earthquake and then the inter-storey drift knowing only the modal parameters (modal model). This process is finally applied to a 9-storey reinforced concrete (RC) dwelling in Grenoble (France). We successfully compared the building motion for an artificial ground motion deduced from the model estimated using ambient vibrations and recorded in the building. The stiffness of each storey and the inter-storey drift were also calculated.
We report an empirical determination of the probability density functions P(r) of the number r of earthquakes in finite space-time windows for the California catalog, over fixed spatial boxes 5 x 5 km^2 and time intervals dt =1, 10, 100 and 1000 days
. We find a stable power law tail P(r) ~ 1/r^{1+mu} with exponent mu approx 1.6 for all time intervals. These observations are explained by a simple stochastic branching process previously studied by many authors, the ETAS (epidemic-type aftershock sequence) model which assumes that each earthquake can trigger other earthquakes (``aftershocks). An aftershock sequence results in this model from the cascade of aftershocks of each past earthquake. We develop the full theory in terms of generating functions for describing the space-time organization of earthquake sequences and develop several approximations to solve the equations. The calibration of the theory to the empirical observations shows that it is essential to augment the ETAS model by taking account of the pre-existing frozen heterogeneity of spontaneous earthquake sources. This seems natural in view of the complex multi-scale nature of fault networks, on which earthquakes nucleate. Our extended theory is able to account for the empirical observation satisfactorily. In particular, the adjustable parameters are determined by fitting the largest time window $dt=1000$ days and are then used as frozen in the formulas for other time scales, with very good agreement with the empirical data.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
