اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدFirst stage of LISA data processing: Clock synchronization and arm-length determination via a hybrid-extended Kalman filter
163
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
In this paper, we describe a hybrid-extended Kalman filter algorithm to synchronize the clocks and to precisely determine the inter-spacecraft distances for space-based gravitational wave detectors, such as (e)LISA. According to the simulation, the algorithm has significantly improved the ranging accuracy and synchronized the clocks, making the phase-meter raw measurements qualified for time- delay interferometry algorithms.
قيم البحث
اقرأ أيضاً
Space-borne gravitational wave detectors, such as (e)LISA, are designed to operate in the low-frequency band (mHz to Hz), where there is a variety of gravitational wave sources of great scientific value. To achieve the extraordinary sensitivity of th
ese detector, the precise synchronization of the clocks on the separate spacecraft and the accurate determination of the interspacecraft distances are important ingredients. In our previous paper (Phys. Rev. D 90, 064016 [2014]), we have described a hybrid-extend Kalman filter with a full state vector to do this job. In this paper, we explore several different state vectors and their corresponding (phenomenological) dynamic models, to reduce the redundancy in the full state vector, to accelerate the algorithm, and to make the algorithm easily extendable to more complicated scenarios.
Arm locking is a technique that has been proposed for reducing laser frequency fluctuations in the Laser Interferometer Space Antenna (LISA), a gravitational-wave observatory sensitive in the milliHertz frequency band. Arm locking takes advantage of
the geometric stability of the triangular constellation of three spacecraft that comprise LISA to provide a frequency reference with a stability in the LISA measurement band that exceeds that available from a standard reference such as an optical cavity or molecular absorption line. We have implemented a time-domain simulation of arm locking including the expected limiting noise sources (shot noise, clock noise, spacecraft jitter noise, and residual laser frequency noise). The effect of imperfect a priori knowledge of the LISA heterodyne frequencies and the associated pulling of an arm locked laser is included. We find that our implementation meets requirements both on the noise and dynamic range of the laser frequency.
The Laser Interferometer Space Antenna (LISA) will observe gravitational radiation in the milliHertz band by measuring picometer-level fluctuations in the distance between drag-free proof masses over baselines of approximately five million kilometers
. The measurement over each baseline will be divided into three parts: two short-arm measurements between the proof masses and a fiducial point on their respective spacecraft, and a long-arm measurement between fiducial points on separate spacecraft. This work focuses on the technical challenges associated with these long-arm measurements and the techniques that have been developed to overcome them.
Gravitational waves from the inspiral and coalescence of supermassive black-hole (SMBH) binaries with masses ~10^6 Msun are likely to be among the strongest sources for the Laser Interferometer Space Antenna (LISA). We describe a three-stage data-ana
lysis pipeline designed to search for and measure the parameters of SMBH binaries in LISA data. The first stage uses a time-frequency track-search method to search for inspiral signals and provide a coarse estimate of the black-hole masses m_1, m_2 and of the coalescence time of the binary t_c. The second stage uses a sequence of matched-filter template banks, seeded by the first stage, to improve the measurement accuracy of the masses and coalescence time. Finally, a Markov Chain Monte Carlo search is used to estimate all nine physical parameters of the binary. Using results from the second stage substantially shortens the Markov Chain burn-in time and allows us to determine the number of SMBH-binary signals in the data before starting parameter estimation. We demonstrate our analysis pipeline using simulated data from the first LISA Mock Data Challenge. We discuss our plan for improving this pipeline and the challenges that will be faced in real LISA data analysis.
By listening to gravity in the low frequency band, between 0.1 mHz and 1 Hz, the future space-based gravitational-wave observatory LISA will be able to detect tens of thousands of astrophysical sources from cosmic dawn to the present. The detection a
nd characterization of all resolvable sources is a challenge in itself, but LISA data analysis will be further complicated by interruptions occurring in the interferometric measurements. These interruptions will be due to various causes occurring at various rates, such as laser frequency switches, high-gain antenna re-pointing, orbit corrections, or even unplanned random events. Extracting long-lasting gravitational-wave signals from gapped data raises problems such as noise leakage and increased computational complexity. We address these issues by using Bayesian data augmentation, a method that reintroduces the missing data as auxiliary variables in the sampling of the posterior distribution of astrophysical parameters. This provides a statistically consistent way to handle gaps while improving the sampling efficiency and mitigating leakage effects. We apply the method to the estimation of galactic binaries parameters with different gap patterns, and we compare the results to the case of complete data.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
