اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدCircular Polarization of Periodic Leaky-Wave Antennas with Axial Asymmetry: Theoretical Proof and Experimental Demonstration
348
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The paper includes two contributions. First, it proves that the series and shunt radiation components, corresponding to longitudinal and transversal electric fields, respectively, are always in phase quadrature in axially asymmetric periodic leaky-wave antennas (LWAs), so that these antennas are inherently elliptically polarized. This fact is theoretically proven and experimentally illustrated by two case-study examples, a composite right/left-handed (CRLH) LWA and a series-fed patch (SFP) LWA. Second, it shows (for the case of the SFP LWA) that the axial ratio is controlled and minimized by the degree of axial asymmetry.
قيم البحث
اقرأ أيضاً
We experimentally demonstrate for the first time the degenerate band edge (DBE) condition, namely the degeneracy of four Bloch modes, in loaded circular metallic waveguides. The four modes forming the DBE represent a degeneracy of fourth order occurr
ing in a periodic structure where four Bloch modes, two propagating and two evanescent, coalesce. It leads to a very flat wavenumber-frequency dispersion relation, and the finite length structures quality factor scales as $N^5$ where $N$ is the number of unit cells. The proposed waveguide in which DBE is observed here is designed by periodically loading a circular waveguide with misaligned elliptical metallic rings, supported by a low-index dielectric. We validate the existence of the DBE in such structure using measurements and we report good agreement between full-wave simulation and the measured response of the waveguide near the DBE frequency; taking into account metallic losses. We correlate our finding to theoretical and simulation results utilizing various techniques including dispersion synthesis, as well as observing how quality factor and group delay scale as the structure length increases. Moreover, the reported geometry is only an example of metallic waveguide with DBE: DBE and its characteristics can also be designed in many other kinds of waveguides and various applications can be contemplated as high microwave generation in amplifiers and oscillators based on an electron beam interaction or solid state devices, pulse compressors and microwave sensors.
Manipulating the excitation of resonant electric and magnetic multipole moments in structured dielectric media has unlocked many sophisticated electromagnetic functionalities. This article demonstrates the experimental realization of a broadband Huyg
ens source. This Huygens source consists of a spherical particle that exhibits a well-defined forward-scattering pattern across more than an octave-spanning spectral band at GHz frequencies, where the scattering in the entire backward hemisphere is suppressed. Two different low-index nonmagnetic spheres are studied that differ in their permittivity. This causes them to offer a different shape for the forward-scattering pattern. The theoretical understanding of this broadband feature is based on the approximate equality of the resonant electric and magnetic multipole moments in both amplitude and phase in low permittivity spheres. This is a key condition to approximate the electromagnetic duality symmetry which, together with the spherical symmetry, suppresses the backscattering. With such a configuration, broadband Huygens sources can be designed even if magnetic materials are unavailable. This article provides guidelines for designing broadband Huygens sources using low-index spheres that could be valuable to a plethora of applications.
Despite their great potential in communication and sensing applications, printed leaky-wave antennas have rarely been reported at mm-wave frequencies. In this paper, tapered leaky-wave antennas operating at 80 GHz are designed, fabricated and experim
entally characterized. While most continuous leaky-wave antennas use subwavelength strips or other comparably small elements, in this work, the surface impedance is discretized very coarsely using only three square patches per period. With this architecture, a wide range of surface reactance can be achieved while maintaining a minimum feature size of the metallic pattern that is feasible for printed circuit fabrication. As the analytical solution for the bandstructure of sinusoidally modulated reactance surfaces is inaccurate for coarse discretization, we find it using full-wave simulation. In order to control side lobes effectively, we use a tapered aperture illumination according to the Taylor one-parameter distribution. A comprehensive experimental demonstration is presented, including near-field and far-field measurements. Therewith, we verify the designed aperture illumination and we reveal the origin of spurious far-field features. Side lobes are effectively suppressed and spurious radiation is reduced to -18 dB compared to the main lobe.
Directive optical leaky wave antennas (OLWAs) with tunable radiation pattern are promising integrated optical modulation and scanning devices. OLWAs fabricated using CMOS-compatible semiconductor planar waveguide technology have the potential of prov
iding high directivity with electrical tunability for modulation and switching capabilities. We experimentally demonstrate directive radiation from a silicon nitride ($Si_3N_4$) waveguide-based OLWA. The OLWA design comprises 50 crystalline Si perturbations buried inside the waveguide, with a period of 1 {mu}m, each with a length of 260 nm and a height of 150 nm, leading to a directive radiation pattern at telecom wavelengths. The measured far-field radiation pattern at the wavelength of 1540 nm is very directive, with the maximum intensity at the angle of 84.4{deg} relative to the waveguide axis and a half-power beam width around 6.2{deg}, which is consistent with our theoretical predictions. The use of semiconductor perturbations facilitates electronic radiation control thanks to the refractive index variation induced by a carrier density change in the perturbations. To assess the electrical modulation capability, we study carrier injection and depletion in Si perturbations, and investigate the Franz-Keldysh effect in germanium as an alternative way. We theoretically show that the silicon wire modulator has a -3 dB modulation bandwidth of 75 GHz with refractive index change of $3times10^{-4}$ in depletion mode, and 350 MHz bandwidth with refractive index change of $1.5times10^{-2}$ in injection mode. The Franz-Keldysh effect has the potential to generate very fast modulation in radiation control at telecom wavelengths.
This paper presents an exact solution for a perfect conversion of a TM-polarized surface wave (SW) into a TM-polarized leaky-wave (LW) using a reciprocal and lossless penetrable metasurface (MTS) characterized by a scalar sheet impedance, located on
a grounded slab. In contrast to known realizations of leaky-wave antennas, the optimal surface reactance modulation which is found here ensures the absence of evanescent higher-order modes of the field Floquet-wave expansion near the radiating surface. Thus, all the energy carried by the surface wave is used for launching the single inhomogeneous plane wave into space without accumulation of reactive energy in the higher-order modes. It is shown that the resulting penetrable MTS exhibits variation from an inductive to a capacitive reactance passing through a resonance. The present formulation complements a previous paper of the authors in which a perfect conversion from TM-polarized SW to TE-polarized LW was found for impenetrable boundary conditions. Here, the solution takes into account the grounded slab dispersion and it is convenient for practical implementation.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
