اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدSquare Kilometre Array: a concept design for Phase 1
132
0
0.0
(
0
)
تأليف
M.A. Garrett
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The SKA at mid and low frequencies will be constructed in two distinct phases, the first being a subset of the second. This document defines the main scientific goals and baseline technical concept for the SKA Phase 1 (SKA_1). The major science goals for SKA_1 will be to study the history and role of neutral Hydrogen in the Universe from the dark ages to the present-day, and to employ pulsars as probes of fundamental physics. The baseline technical concept of SKA_1 will include a sparse aperture array operating at frequencies up to 450 MHz, and an array of dishes, initially operating at frequencies up to 3 GHz but capable of 10 GHz in terms of antenna surface accuracy. An associated Advanced Instrumentation Program (AIP) allows further development of new technologies currently under investigation. Construction will take place in 2016-2019 at a total capital cost of 350Mtexteuro, including an element for contingency. The cost estimates of the SKA_1 telescope are now the subject of a more detailed and thorough costing exercise led by the SKA Project Development Office (SPDO). The 350 Mtexteuro total for SKA_1 is a cost-constrained cap; an additional contingency is to reduce the overall scope of the project. The design of the SKA_1 is expected to evolve as the major cost estimates are refined, in particular the infrastructure costs at the two sites. The SKA_1 facility will represent a major step forward in terms of sensitivity, survey speed, image fidelity, temporal resolution and field-of-view. It will open up new areas of discovery space and demonstrate the science and technology underpinning the SKA Phase 2 (SKA_2).
قيم البحث
اقرأ أيضاً
The Square Kilometre Array (SKA), currently under design, will be a transformational facility for studying the Universe at centimetre and metre wavelengths in the next decade and beyond. This paper provides the current best estimate of the anticipate
d performance of SKA Phase 1 (SKA1), using detailed design work, before actual on-sky measurements have been made. It will be updated as new information becomes available. The information contained in this paper takes precedent over any previous documents.
We review the current status of the Square Kilometre Array (SKA) by outlining the science drivers for its Phase-1 (SKA1) and setting out the timeline for the key decisions and milestones on the way to the planned start of its construction in 2016. We
explain how Phase-2 SKA (SKA2) will transform the research scope of the SKA infrastructure, placing it amongst the great astronomical observatories and survey instruments of the future, and opening up new areas of discovery, many beyond the confines of conventional astronomy.
The Square Kilometre Array (SKA) will be both the largest radio telescope ever constructed and the largest Big Data project in the known Universe. The first phase of the project will generate on the order of 5 zettabytes of data per year. A critical
task for the SKA will be its ability to process data for science, which will need to be conducted by science pipelines. Together with polarization data from the LOFAR Multifrequency Snapshot Sky Survey (MSSS), we have been developing a realistic SKA-like science pipeline that can handle the large data volumes generated by LOFAR at 150 MHz. The pipeline uses task-based parallelism to image, detect sources, and perform Faraday Tomography across the entire LOFAR sky. The project thereby provides a unique opportunity to contribute to the technological development of the SKA telescope, while simultaneously enabling cutting-edge scientific results. In this paper, we provide an update on current efforts to develop a science pipeline that can enable tight constraints on the magnetised large-scale structure of the Universe.
As the largest radio telescope in the world, the Square Kilometre Array (SKA) will lead the next generation of radio astronomy. The feats of engineering required to construct the telescope array will be matched only by the techniques developed to exp
loit the rich scientific value of the data. To drive forward the development of efficient and accurate analysis methods, we are designing a series of data challenges that will provide the scientific community with high-quality datasets for testing and evaluating new techniques. In this paper we present a description and results from the first such Science Data Challenge (SDC1). Based on SKA MID continuum simulated observations and covering three frequencies (560 MHz, 1400MHz and 9200 MHz) at three depths (8 h, 100 h and 1000 h), SDC1 asked participants to apply source detection, characterization and classification methods to simulated data. The challenge opened in November 2018, with nine teams submitting results by the deadline of April 2019. In this work we analyse the results for 8 of those teams, showcasing the variety of approaches that can be successfully used to find, characterise and classify sources in a deep, crowded field. The results also demonstrate the importance of building domain knowledge and expertise on this kind of analysis to obtain the best performance. As high-resolution observations begin revealing the true complexity of the sky, one of the outstanding challenges emerging from this analysis is the ability to deal with highly resolved and complex sources as effectively as the unresolved source population.
Next generation radio telescopes, such as the Square Kilometre Array (SKA) and Next Generation Very Large Array (ngVLA), require precise microwave frequency reference signals to be transmitted over fiber links to each dish to coherently sample astron
omical signals. Such telescopes employ phase stabilization systems to suppress the phase noise imparted on the reference signals by environmental perturbations on the links; however, the stabilization systems are bandwidth limited by the round-trip time of light travelling on the fiber links. A phase-locked Receiver Module (RM) is employed on each dish to suppress residual phase noise outside of the round-trip bandwidth. The SKA RM must deliver a 3.96 GHz output signal with 4 MHz of tuning range and less than 100 fs of timing jitter. We present an RM architecture to meet both requirements. Analytical modelling of the RM predicts 30 fs of output jitter when the reference signal is integrated between 1 Hz and 2.8 GHz. The proposed RM was conceived with best practice electromagnetic compatibility in mind, and to meet size, weight and power requirements for the SKA dish indexer. As the ngVLA reference design also incorporates a round-trip phase stabilization system, this RM may be applicable to future ngVLA design.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
