اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدMicrotearing modes as the source of magnetic fluctuations in the JET pedestal
266
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We report on a detailed study of magnetic fluctuations in the JET pedestal, employing basic theoretical considerations, gyrokinetic simulations, and experimental fluctuation data, to establish the physical basis for their origin, role, and distinctive characteristics. We demonstrate quantitative agreement between gyrokinetic simulations of microtearing modes (MTMs) and two magnetic frequency bands with corresponding toroidal mode numbers n=4 and 8. Such disparate fluctuation scales, with substantial gaps between toroidal mode numbers, are commonly observed in pedestal fluctuations. Here we provide a clear explanation, namely the alignment of the relevant rational surfaces (and not others) with the peak in the omega star profile, which is localized in the steep gradient region of the pedestal. We demonstrate that a global treatment is required to capture this effect. Nonlinear simulations suggest that the MTM fluctuations produce experimentally-relevant transport levels and saturate by relaxing the background electron temperature gradient, slightly downshifting the fluctuation frequencies from the linear predictions. Scans in collisionality are compared with simple MTM dispersion relations. At the experimental points considered, MTM growth rates can either increase or decrease with collision frequency depending on the parameters thus defying any simple characterization of collisionality dependence.
قيم البحث
اقرأ أيضاً
Microtearing modes are an important drive of turbulent heat transport in present-day fusion plasmas. We investigate their linear stability under very-low collisionality regimes, expected for the next generations of devices, using gyrokinetic and drif
t-kinetic approaches. At odds with current opinion, we show that collisionless microtearing instabilities may occur in certain experimental conditions, particularly relevant for such devices as reversed field pinches and spherical tokamaks.
In the reversed field pinch RFX-mod strong electron temperature gradients develop when the Single-Helical-Axis regime is achieved. Gyrokinetic calculations show that in the region of the strong temperature gradients microtearing instabilities are the
dominant turbulent mechanism acting on the ion Larmor radius scale. The quasi-linear evaluation of the electron thermal conductivity is in good agreement with the experimental estimates.
This paper compares the gyrokinetic instabilities and transport in two representative JET pedestals, one (pulse 78697) from the JET configuration with a carbon wall (C) and another (pulse 92432) from after the installation of JETs ITER-like Wall (ILW
). The discharges were selected for a comparison of JET-ILW and JET-C discharges with good confinement at high current (3 MA, corresponding also to low $rho_*$) and retain the distinguishing features of JET-C and JET-ILW, notably, decreased pedestal top temperature for JET-ILW. A comparison of the profiles and heating power reveals a stark qualitative difference between the discharges: the JET-ILW pulse (92432) requires twice the heating power, at a gas rate of $1.9 times 10^{22}e/s$, to sustain roughly half the temperature gradient of the JET-C pulse (78697), operated at zero gas rate. This points to heat transport as a central component of the dynamics limiting the JET-ILW pedestal and reinforces the following emerging JET-ILW pedestal transport paradigm, which is proposed for further examination by both theory and experiment. ILW conditions modify the density pedestal in ways that decrease the normalized pedestal density gradient $a/L_n$, often via an outward shift of the density pedestal. This is attributable to some combination of direct metal wall effects and the need for increased fueling to mitigate tungsten contamination. The modification to the density profile increases $eta = L_n/L_T$ , thereby producing more robust ion temperature gradient (ITG) and electron temperature gradient driven instability. The decreased pedestal gradients for JET-ILW (92432) also result in a strongly reduced $E times B$ shear rate, further enhancing the ion scale turbulence. Collectively, these effects limit the pedestal temperature and demand more heating power to achieve good pedestal performance.
The control and mitigation of MHD oscillations modes is an open problem in fusion science because they can contribute to the outward particle/energy flux and can drive the device away from ignition conditions. It is then of general interest to extrac
t the mode information from large experimental databases in a fast and reliable way. We present a software tool based on Deep Learning that can identify these oscillations modes taking Mirnov coil spectrograms as input data. It uses Convolutional Neural Networks that we trained with manually annotated spectrograms from the TJ-II stellarator database. We have tested several detector architectures, resultingin a detector AUC score of 0.99 on the test set. Finally, it is applied to find MHD modes in our spectrograms to show how this new software tool can be used to mine other databases.
Long-lived, highly localized structures called palm tree modes (PTM) are observed in the edge plasma of the JET tokamak. Although PTMs are well documented, little is known about the mechanisms which produce these structures. In the case of the PTM, a
n ELM-postcursor, its genesis is usually explained by ergodisation of the magnetic field due to edge localized modes and the appearance of a seed magnetic island which evolves into a PTM later. In this study we try to invoke a creation mechanism based on the concepts and observations in edge plasma turbulence. An interesting aspect of plasma turbulence is the occurrence of coherent, long-lived structures in the scrape-off-layer (SOL). These localized and magnetic-field-aligned regions with higher or lower plasma densities are called blobs and holes. Measurements show that these filaments carry parallel currents. We thus here interpret ELM-filaments as massive blobs and the interspace between these filaments as holes. We demonstrate that a forward-modelled closed current filament on a q=3 surface produces similar magnetic fluctuations as measured by the JET in-vessel magnetic pickup coils if a PTM is present. From that we deduce that if a hole is captured on a q=3 surface after an ELM-crash, a PTM equivalent signature is generated. If the ELM-filament itself is captured on a q=4 surface, a signature equivalent to an outer mode appears.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
