اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدDesign and Implementation of Time-Sensitive Wireless IoT Networks on Software-Defined Radio
377
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Time-sensitive wireless networks are an important enabling building block for many emerging industrial Internet of Things (IoT) applications. Quick prototyping and evaluation of time-sensitive wireless technologies are desirable for R&D efforts. Software-defined radio (SDR), by allowing wireless signal processing on a personal computer (PC), has been widely used for such quick prototyping efforts. Unfortunately, because of the textit{uncontrollable delay} between the PC and the radio board, SDR is generally deemed not suitable for time-sensitive wireless applications that demand communication with low and deterministic latency. For a rigorous evaluation of its suitability for industrial IoT applications, this paper conducts a quantitative investigation of the synchronization accuracy and end-to-end latency achievable by an SDR wireless system. To this end, we designed and implemented a time-slotted wireless system on the Universal Software Radio Peripheral (USRP) SDR platform. We developed a time synchronization mechanism to maintain synchrony among nodes in the system. To reduce the delays and delay jitters between the USRP board and its PC, we devised a {textit{Just-in-time}} algorithm to ensure that packets sent by the PC to the USRP can reach the USRP just before the time slots they are to be transmitted. Our experiments demonstrate that $90%$ ($100%$) of the time slots of different nodes can be synchronized and aligned to within $ pm 0.5$ samples or $ pm 0.05mu s$ ($ pm 1.5$ samples or $ pm 0.15mu s$), and that the end-to-end packet delivery latency can be down to $3.75ms$. This means that SDR-based solutions can be applied in a range of IIoT applications that require tight synchrony and moderately low latency, e.g., sensor data collection, automated guided vehicle (AGV) control, and Human-Machine-Interaction (HMI).
قيم البحث
اقرأ أيضاً
The flexible and programmable architectural model offered by Software-Defined Networking (SDN) has re-imagined modern networks. Supported by powerful hardware and high-speed communications between devices and the controller, SDN provides a means to v
irtualize control functionality and enable rapid network reconfiguration in response to dynamic application requirements. However, recent efforts to apply SDNs centralized control model to the Internet of Things (IoT) have identified significant challenges due to the constraints faced by embedded low-power devices and networks that reside at the IoT edge. In particular, reliance on external SDN controllers on the backbone network introduces a performance bottleneck (e.g., latency). To this end, we advocate a case for supporting Software-Defined IoT networks through the introduction of lightweight SDN controllers directly on the embedded hardware. We firstly explore the performance of two popular SDN implementations for IoT mesh networks, $mu$SDN and SDN-WISE, showing the former demonstrates considerable gains over the latter. We consequently employ $mu$SDN to conduct a study of embedded vs. external SDN controller performance. We highlight how the advantage of an embedded controller is reduced as the network scales, and quantify a point at which an external controller should be used for larger networks.
More and more emerging Internet of Things (IoT) applications involve status updates, where various IoT devices monitor certain physical processes and report their latest statuses to the relevant information fusion nodes. A new performance measure, te
rmed the age of information (AoI), has recently been proposed to quantify the information freshness in time-critical IoT applications. Due to a large number of devices in future IoT networks, the decentralized channel access protocols (e.g. random access) are preferable thanks to their low network overhead. Built on the AoI concept, some recent efforts have developed several AoI-oriented ALOHA-like random access protocols for boosting the network-wide information freshness. However, all relevant works focused on theoretical designs and analysis. The development and implementation of a working prototype to evaluate and further improve these random access protocols in practice have been largely overlooked. Motivated as such, we build a software-defined radio (SDR) prototype for testing and comparing the performance of recently proposed AoI-oriented random access protocols. To this end, we implement a time-slotted wireless system by devising a simple yet effective over-the-air time synchronization scheme, in which beacons that serve as reference timing packets are broadcast by an access point from time to time. For a complete working prototype, we also design the frame structures of various packets exchanged within the system. Finally, we design a set of experiments, implement them on our prototype and test the considered algorithms in an office environment.
This paper presents the design and implementation of signaling splitting scheme in hyper-cellular network on a software defined radio platform. Hyper-cellular network is a novel architecture of future mobile communication systems in which signaling a
nd data are decoupled at the air interface to mitigate the signaling overhead and allow energy efficient operation of base stations. On an open source software defined radio platform, OpenBTS, we investigate the feasibility of signaling splitting for GSM protocol and implement a novel system which can prove the proposed concept. Standard GSM handsets can camp on the network with the help of signaling base station, and data base station will be appointed to handle phone calls on demand. Our work initiates the systematic approach to study hyper-cellular concept in real wireless environment with both software and hardware implementations.
Software-defined networking (SDN) provides an agile and programmable way to optimize radio access networks via a control-data plane separation. Nevertheless, reaping the benefits of wireless SDN hinges on making optimal use of the limited wireless fr
onthaul capacity. In this work, the problem of fronthaul-aware resource allocation and user scheduling is studied. To this end, a two-timescale fronthaul-aware SDN control mechanism is proposed in which the controller maximizes the time-averaged network throughput by enforcing a coarse correlated equilibrium in the long timescale. Subsequently, leveraging the controllers recommendations, each base station schedules its users using Lyapunov stochastic optimization in the short timescale, i.e., at each time slot. Simulation results show that significant network throughput enhancements and up to 40% latency reduction are achieved with the aid of the SDN controller. Moreover, the gains are more pronounced for denser network deployments.
There is a strong devotion in the automotive industry to be part of a wider progression towards the Fifth Generation (5G) era. In-vehicle integration costs between cellular and vehicle-to-vehicle networks using Dedicated Short Range Communication cou
ld be avoided by adopting Cellular Vehicle-to-Everything (C-V2X) technology with the possibility to re-use the existing mobile network infrastructure. More and more, with the emergence of Software Defined Networks, the flexibility and the programmability of the network have not only impacted the design of new vehicular network architectures but also the implementation of V2X services in future intelligent transportation systems. In this paper, we define the concepts that help evaluate software-defined-based vehicular network systems in the literature based on their modeling and implementation schemes. We first overview the current studies available in the literature on C-V2X technology in support of V2X applications. We then present the different architectures and their underlying system models for LTE-V2X communications. We later describe the key ideas of software-defined networks and their concepts for V2X services. Lastly, we provide a comparative analysis of existing SDN-based vehicular network system grouped according to their modeling and simulation concepts. We provide a discussion and highlight vehicular ad-hoc networks challenges handled by SDN-based vehicular networks.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
