اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدActivated lone-pair electrons lead to low lattice thermal conductivity: a case study of boron arsenide
114
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Reducing thermal conductivity ($kappa$) is an efficient way to boost the thermoelectric performance to achieve direct solid-state conversion to electrical power from thermal energy, which has lots of valuable applications in reusing waste resources. In this study, we propose an effective approach for realizing low $kappa$ by introducing lone-pair electrons or making the lone-pair electrons stereochemically active through bond nanodesigning. As a case study, by cutting at the (111) cross section of the three-dimensional cubic boron arsenide (c-BAs), the $kappa$ is lowered by more than one order of magnitude in the resultant two-dimensional system of graphene-like BAs (g-BAs) due to the stereochemically activated lone-pair electrons. Similar concept can be also extended to other systems with lone-pair electrons beyond BAs, such as group III-V compounds, where a strong correlation between $kappa$ modulation and electronegativity difference for binary compounds is found. Thus, the lone-pair electrons combined with a small electronegativity difference could be the indicator of lowering $kappa$ through bond nanodesigning to change the coordination environment. The proposed approach for realizing low $kappa$ and the underlying mechanism uncovered in this study would largely benefit the design of thermoelectric devices with improved performance, especially in future researches involving novel materials for energy applications.
قيم البحث
اقرأ أيضاً
Recent measurements of an unusual high thermal conductivity of around 1000 W m-1 K-1 at room temperature in cubic boron arsenide (BAs) confirm predictions from theory and suggest potential applications of this semiconductor compound for thermal manag
ement applications. Knowledge of the thermal expansion coefficient and Gruneisen parameter of a material contributes both to the fundamental understanding of its lattice anharmonicity and to assessing its utility as a thermal-management material. However, previous theoretical calculations of the thermal expansion coefficient and Gruneisen parameter of BAs yield inconsistent results. Here we report the linear thermal expansion coefficient of BAs obtained from the X-ray diffraction measurements from 300 K to 773 K. The measurement results are in good agreement with our ab initio calculations that account for atomic interactions up to fifth nearest neighbours. With the measured thermal expansion coefficient and specific heat, a Gruneisen parameter of BAs of 0.84 +/- 0.09 is obtained at 300 K, in excellent agreement with the value of 0.82 calculated from first principles and much lower than prior theoretical results. Our results confirm that BAs exhibits a better thermal expansion coefficient match with commonly used semiconductors than other high-thermal conductivity materials such as diamond and cubic boron nitride.
Cubic boron arsenide (BAs) is attracting greater attention due to the recent experimental demonstration of ultrahigh thermal conductivity k{appa} above 1000 W/mK. However, its bandgap has not been settled and a simple yet effective method to probe it
s crystal quality is missing. Furthermore, traditional k{appa} measurement methods are destructive and time consuming, thus they cannot meet the urgent demand for fast screening of high k{appa} materials. After we experimentally established 1.82 eV as the indirect bandgap of BAs and observed room-temperature band-edge photoluminescence, we developed two new optical techniques that can provide rapid and non-destructive characterization of k{appa} with little sample preparation: photoluminescence mapping (PL-mapping) and time-domain thermo-photoluminescence (TDTP). PL-mapping provides nearly real-time image of crystal quality and k{appa} over mm-sized crystal surfaces; while TDTP allows us to pick up any spot on the sample surface and measure its k{appa} using nanosecond laser pulses. These new techniques reveal that the apparent single crystals are not only non-uniform in k{appa}, but also are made of domains of very distinct k{appa}. Because PL-mapping and TDTP are based on the band-edge PL and its dependence on temperature, they can be applied to other semiconductors, thus paving the way for rapid identification and development of high-k{appa} semiconducting materials.
We demonstrate that a high-dimensional neural network potential (HDNNP) can predict the lattice thermal conductivity of semiconducting materials with an accuracy comparable to that of density functional theory (DFT) calculation. After a training proc
edure based on the force, the root mean square error between the forces predicted by the HDNNP and DFT is less than 40 meV/{AA}. As typical examples, we present the results for Si and GaN bulk crystals. The deviation from the thermal conductivity calculated using DFT is within 1% at 200 to 500 K for Si and within 5.4% at 200 to 1000 K for GaN.
Two-dimensional materials are characterised by a number of unique physical properties which can potentially make them useful to a wide diversity of applications. In particular, the large thermal conductivity of graphene and hexagonal boron nitride ha
s already been acknowledged and these materials have been suggested as novel core materials for thermal management in electronics. However, it was not clear if mass produced flakes of hexagonal boron nitride would allow one to achieve an industrially-relevant value of thermal conductivity. Here we demonstrate that laminates of hexagonal boron nitride exhibit thermal conductivity of up to 20 W/mK, which is significantly larger than that currently used in thermal management. We also show that the thermal conductivity of laminates increases with the increasing volumetric mass density, which creates a way of fine-tuning its thermal properties.
Semiconductors with very low lattice thermal conductivities are highly desired for applications relevant to thermal energy conversion and management, such as thermoelectrics and thermal barrier coatings. Although the crystal structure and chemical bo
nding are known to play vital roles in shaping heat transfer behavior, material design approaches of lowering lattice thermal conductivity using chemical bonding principles are uncommon. In this work, we present an effective strategy of weakening interatomic interactions and therefore suppressing lattice thermal conductivity based on chemical bonding principles and develop a high-efficiency approach of discovering low $kappa_{rm L}$ materials by screening the local coordination environments of crystalline compounds. The followed first-principles calculations uncover 30 hitherto unexplored compounds with (ultra)low lattice thermal conductivities from thirteen prototype crystal structures contained in the inorganic crystal structure database. Furthermore, we demonstrate an approach of rationally designing high-performance thermoelectrics by additionally incorporating cations with stereochemically active lone-pair electrons. Our results not only provide fundamental insights into the physical origin of the low lattice thermal conductivity in a large family of copper-based compounds but also offer an efficient approach to discovery and design materials with targeted thermal transport properties.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
