اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدSpectrophotometric Modeling and Mapping of Ceres
72
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We report a comprehensive analysis of the global spectrophotometric properties of Ceres using Dawn Framing Camera images collected from April to June 2015 during the RC3 and Survey mission phases. The single-scattering albedo of Ceres at 555 nm is 0.14$pm$0.04, the geometric albedo is 0.096$pm$0.006, and the Bond albedo is 0.037$pm$0.002. The asymmetry factors calculated from the best-fit two-term Henyey-Greenstein (HG) single-particle phase function (SPPF) show a wavelength dependence, suggesting that the phase reddening of Ceres is dominated by single-particle scattering rather than multiple scattering or small-scale surface roughness. The Hapke roughness parameter of Ceres is derived to be 20$^circpm$6$^circ$ with no wavelength dependence. The phase function of Ceres shows appreciably strong scattering around 90$^circ$ phase angle that cannot be fitted with a single-term HG SPPF, suggesting possible stronger forward scattering than other asteroids previously analyzed with spacecraft data. We speculate that such a scattering characteristic of Ceres might be related to its unique surface composition. We grouped the reflectance data into a 1$^circ$ latitude-longitude grid and fitted each grid independently to study the spatial variations of photometric properties. The albedo and color maps are consistent with previous studies. The SPPF over the surface of Ceres shows stronger backscattering associated with lower albedo and vice versa, consistent with the general trend among asteroids. The Hapke roughness parameter does not vary much across the surface of Ceres, except for the ancient Vendimia Planitia region that has a slightly higher roughness. Based on the wavelength dependence of the SPPF of Ceres, we hypothesize that its regolith grains either contain a considerable fraction of $lessapproxmu$m-sized particles, or are strongly affected by internal scatterers of this size.
قيم البحث
اقرأ أيضاً
We present a global spectrophotometric characterization of the Ceres surface using Dawn Framing Camera (FC) images. We identify the photometric model that yields the best results for photometrically correcting images. Corrected FC images acquired on
approach to Ceres were assembled into global maps of albedo and color. Generally, albedo and color variations on Ceres are muted. The albedo map is dominated by a large, circular feature in Vendimia Planitia, known from HST images (Li et al., 2006), and dotted by smaller bright features mostly associated with fresh-looking craters. The dominant color variation over the surface is represented by the presence of blue material in and around such craters, which has a negative spectral slope over the visible wavelength range when compared to average terrain. We also mapped variations of the phase curve by employing an exponential photometric model, a technique previously applied to asteroid Vesta (Schroder et al., 2013b). The surface of Ceres scatters light differently from Vesta in the sense that the ejecta of several fresh-looking craters may be physically smooth rather than rough. High albedo, blue color, and physical smoothness all appear to be indicators of youth. The blue color may result from the desiccation of ejected material that is similar to the phyllosilicates/water ice mixtures in the experiments of Poch et al. (2016). The physical smoothness of some blue terrains would be consistent with an initially liquid condition, perhaps as a consequence of impact melting of subsurface water ice. We find red terrain (positive spectral slope) near Ernutet crater, where De Sanctis et al. (2017) detected organic material. The spectrophotometric properties of the large Vendimia Planitia feature suggest it is a palimpsest, consistent with the Marchi et al. (2016) impact basin hypothesis. The central bright area in Occator crater, Cerealia...
We study the spectrophotometric properties of dwarf planet Ceres in the VIS-IR spectral range by means of hyper-spectral images acquired by the VIR imaging spectrometer on board the NASA Dawn mission. Disk-resolved observations with a phase angle wit
hin the $7^{circ}<alpha<132^{circ}$ interval were used to characterize Ceres phase curve in the 0.465-4.05 $mu$m spectral range. Hapkes model was applied to perform the photometric correction of the dataset, allowing us to produce albedo and color maps of the surface. The $V$-band magnitude phase function of Ceres was fitted with both the classical linear model and H-G formalism. The single-scattering albedo and the asymmetry parameter at 0.55$mu$m are $w=0.14pm0.02$ and $xi=-0.11pm0.08$, respectively (two-lobe Henyey-Greenstein phase function); the modeled geometric albedo is $0.094pm0.007$; the roughness parameter is $bar{theta}=29^{circ}pm6^{circ}$. Albedo maps indicate small variability on a global scale with an average reflectance of $0.034 pm 0.003$. Isolated areas such as the Occator bright spots, Haulani, and Oxo show an albedo much higher than average. We measure a significant spectral phase reddening, and the average spectral slope of Ceres surface after photometric correction is $1.1%kAA^{-1}$ and $0.85%kAA^{-1}$ at VIS and IR wavelengths, respectively. Broadband color indices are $V-R=0.38pm0.01$ and $R-I=0.33pm0.02$. H-G modeling of the $V$-band magnitude phase curve for $alpha<30^{circ}$ gives $H=3.14pm0.04$ and $G=0.10pm0.04$, while the classical linear model provides $V(1,1,0^{circ})=3.48pm0.03$ and $beta=0.036pm0.002$. The comparison with spectrophotometric properties of other minor bodies indicates that Ceres has a less back-scattering phase function and a slightly higher albedo than comets and C-type objects. However, the latter represents the closest match in the usual asteroid taxonomy.
Previous observations suggested that Ceres has active but possibly sporadic water outgassing, and possibly varying spectral characteristics in a time scale of months. We used all available data of Ceres collected in the past three decades from the gr
ound and the Hubble Space Telescope, and the newly acquired images by Dawn Framing Camera to search for spectral and albedo variability on Ceres, in both a global scale and local regions, particularly the bright spots inside Occator crater, over time scales of a few months to decades. Our analysis has placed an upper limit on the possible temporal albedo variation on Ceres. Sporadic water vapor venting, or any possibly ongoing activity on Ceres, is not significant enough to change the albedo or the area of the bright features in Occator crater by >15%, or the global albedo by >3% over various time scales that we searched. Recently reported spectral slope variations can be explained by changing Sun-Ceres-Earth geometry. The active area on Ceres is less than 1 km$^2$, too small to cause global albedo and spectral variations detectable in our data. Impact ejecta due to impacting projectiles of tens of meters in size like those known to cause observable changes to the surface albedo on Asteroid Scheila cannot cause detectable albedo change on Ceres due to its relatively large size and strong gravity. The water vapor activity on Ceres is independent of Ceres heliocentric distance, rulling out the possibility of comet-like sublimation process as a possible mechanism driving the activity.
In order to investigate the causes of different spectral slope in ccps, different grain-sizes of Ceres analogue mixtures were produced, heated to remove absorption of atmospheric water, and spectrally analyzed. First, the end-members which compose th
e Ceres surface (using the antigorite as Mg-phyllosilicate, the NH4-montmorillonite as NH4-phyllosilicate, the dolomite as carbonate and the graphite as dark component), were mixed, obtaining mixtures with different relative abundance, and identifying the mixture with the reflectance spectrum most similar to the average Ceres spectrum. The mixtures were obtained with grain size of 0-25 {mu}m, 25-50 mic and 50-100 mic, were heated and spectrally analysed at T= 300 K and T=200 K (typical for surface Ceres temperature during VIR observations). The most similar Ceres analogue mixture is composed of dolomite (18%), graphite (27%), antigorite (32%) and NH4-montmorillonite (29%) and the results of this work suggest that this mixture is more similar to the Ceres youngest region than to the Ceres average, in particular for the negative slope of spectrum. Small variation in the composition and grain size of end-members need to be considered, in addition to the occurrence of a dark component dispersed in fine size. Furthermore, the positive spectral slope that characterizes the mean Ceres spectrum can be obtained by the application of some processes simulating the space weathering on Ceres (as micro-meteoritic impacts and solar wind irradiation), i.e. laser and ion irradiation. As conclusion, youngest ccps on Ceresare probably composed by fresher and weakly processed mixture with fine dark material intimately dispersed: as a result, the reflectance spectra of youngest material show a negative slope in the 1.2-1.9 mic range. The redder slope observed in the older ccps is probably the consequence of the space weathering effects on fresher material
We develop a new retrieval scheme for obtaining two-dimensional surface maps of exoplanets from scattered light curves. In our scheme, the combination of the L1-norm and Total Squared Variation, which is one of the techniques used in sparse modeling,
is adopted to find the optimal map. We apply the new method to simulated scattered light curves of the Earth, and find that the new method provides a better spatial resolution of the reconstructed map than those using Tikhonov regularization. We also apply the new method to observed scattered light curves of the Earth obtained during the two-year DSCOVR/EPIC observations presented by Fan et al. (2019). The method with Tikhonov regularization enables us to resolve North America, Africa, Eurasia, and Antarctica. In addition to that, the sparse modeling identifies South America and Australia, although it fails to find the Antarctica maybe due to low observational weights on the poles. Besides, the proposed method is capable of retrieving maps from noise injected light curves of a hypothetical Earth-like exoplanet at 5 pc with noise level expected from coronagraphic images from a 8-m telescope. We find that the sparse modeling resolves Australia, Afro-Eurasia, North America, and South America using 2-year observation with a time interval of one month. Our study shows that the combination of sparse modeling and multi-epoch observation with 1 day or 5 days per month can be used to identify main features of an Earth analog in future direct imaging missions such as the Large UV/Optical/IR Surveyor (LUVOIR).
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
