ترغب بنشر مسار تعليمي؟ اضغط هنا

Transforming the Canada France Hawaii Telescope (CFHT) into the Maunakea Spectroscopic Explorer (MSE): A Conceptual Observatory Building and Facilities Design

172   0   0.0 ( 0 )
 نشر من قبل Alan McConnachie
 تاريخ النشر 2018
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

The Canada France Hawaii Telescope Corporation (CFHT) plans to repurpose its observatory on the summit of Maunakea and operate a new wide field spectroscopic survey telescope, the Maunakea Spectroscopic Explorer (MSE). MSE will upgrade the observatory with a larger 11.25m aperture telescope and equip it with dedicated instrumentation to capitalize on the site, which has some of the best seeing in the northern hemisphere, and offer its user community the ability to do transformative science. The knowledge and experience of the current CFHT staff will contribute greatly to the engineering of this new facility. MSE will reuse the same building and telescope pier as CFHT. However, it will be necessary to upgrade the support pier to accommodate a bigger telescope and replace the current dome since a wider slit opening of 12.5 meters in diameter is needed. Once the project is completed the new facility will be almost indistinguishable on the outside from the current CFHT observatory. MSE will build upon CFHTs pioneering work in remote operations, with no staff at the observatory during the night, and use modern technologies to reduce daytime maintenance work. This paper describes the design approach for redeveloping the CFHT facility for MSE including the infrastructure and equipment considerations required to support and facilitate nighttime observations. The building will be designed so existing equipment and infrastructure can be reused wherever possible while meeting new requirement demands. Past experience and lessons learned will be used to create a modern, optimized, and logical layout of the facility. The purpose of this paper is to provide information to readers involved in the MSE project or organizations involved with the redevelopment of an existing observatory facility for a new mission.



قيم البحث

اقرأ أيضاً

The Maunakea Spectroscopic Explorer (MSE) Project is a planned replacement for the existing 3.6-m Canada France Hawaii Telescope (CFHT) into a 10-m class dedicated wide field highly multiplexed fibre fed spectroscopic facility. MSE seeks to tackle ba sic science questions ranging from the origin of stars and stellar systems, Galaxy archaeology at early times, galaxy evolution across cosmic time, to cosmology and the nature of dark matter and dark energy. MSE will be a primary follow-up facility for many key future photometric and astrometric surveys, as well as a major component in the study of the multi-wavelength Universe. The MSE is based on a prime focus telescope concept which illuminate 3200 fibres or more. These fibres are feeding a Low Moderate Resolution (LMR) spectrograph and a High Resolution (HR). The LMR will provide 2 resolution modes at R>2500 and R>5000 on a wavelength range of 360 to 950 nm and a resolution of R>3000 on the 950 nm to 1300 nm bandwidth. Possibly the H band will be also covered by a second NIR mode from ranging from 1450 to 1780 nm. The HR will have a resolution of R>39000 on the 360 to 600 nm wavelength range and R>20000 on the 600 to 900 nm bandwidth. This paper presents the LMR design after its Conceptual Design Review held in June 2017. It focuses on the general concept, optical and mechanical design of the instrument. It describes the associated preliminary expected performances especially concerning optical and thermal performances.
The Maunakea Spectroscopic Explorer (MSE) project will transform the CFHT 3.6m optical telescope to a 10m class dedicated multi-object spectroscopic facility, with an ability to measure thousands of objects with three spectral resolution modes respec tively low resolution of R~3,000, moderate resolution of R~6,000 and high resolution of R~40,000. Two identical multi-object high resolution spectrographs are expected to simultaneously produce 1084 spectra with high resolution of 40,000 at Blue (401-416nm) and Green (472-489nm) channels, and 20,000 at Red (626-674nm) channel. At the Conceptual Design Phase (CoDP), different optical schemes were proposed to meet the challenging requirements, especially a unique design with a novel transmission image slicer array, and another conventional design with oversize Volume Phase Holographic (VPH) gratings. It became clear during the CoDP that both designs presented problems of complexity or feasibility of manufacture, especially high line density disperser (general name for all kinds of grating, grism, prism). At the present, a new design scheme is proposed for investigating the optimal way to reduce technical risk and get more reliable estimation of cost and timescale. It contains new dispersers, F/2 fast collimator and so on. Therein, the disperser takes advantage of a special grism and a prism to reduce line density on grating surface, keep wide opening angle of optical path, and get the similar spectrum layout in all three spectral channels. For the fast collimator, it carefully compares on-axis and off-axis designs in throughput, interface to fiber assembly and technical risks. The current progress is more competitive and credible than the previous design, but it also indicates more challenging work will be done to improve its accessibility in engineering.
MSE will be a massively multiplexed survey telescope, including a segmented primary mirror which feeds fibers at the prime focus, including an array of approximately four thousand fibers, positioned precisely to feed banks of spectrographs several te ns of meters away. We describe the process of mapping top-level requirements on MSE to technical specifications for subsystems located at the MSE prime focus. This includes the overall top-level requirements based on knowledge of similar systems at other telescopes and how those requirements were converted into specifications so that the subsystems could begin working on their Conceptual Design Phases. We then discuss the verification of the engineering specifications and the compiling of lower-level requirements and specifications into higher level performance budgets (e.g. Image Quality). We also briefly discuss the interface specifications, their effect on the performance of the system and the plan to manage them going forward. We also discuss the opto-mechanical design of the telescope top end assembly and refer readers to more details for instrumentation located at the top end.
Optical designs are presented for the Maunakea Spectroscopic Explorer (MSE) telescope. The adopted baseline design is a prime focus telescope with a segmented primary of 11.25m aperture, with speed f/1.93 and 1.52deg field-of-view, optimized for wave lengths 360-1800nm. The Wide-Field Corrector (WFC) has five aspheric lenses, mostly of fused silica, with largest element 1.33m diameter and total glass mass 788kg. The Atmospheric Dispersion Corrector (ADC) is of the compensating lateral type, combining a motion of the entire WFC via the hexapod, with a restoring motion for a single lens. There is a modest amount of vignetting (average 5% over the hexagonal field); this greatly improves image quality, and allows the design to be effectively pupil-centric. The polychromatic image quality is d80<0.225/0.445 at ZD 0/60deg over more than 95% of the hexagonal field-of-view. The ADC action allows adjustment of the plate-scale with zenith distance, which is used to halve the image motions caused by differential refraction. A simple design is presented for achieving the required ADC lens shifts and tilts. A two-mirror design was also undertaken for MSE, but was not selected. This is a 12.3m F/2.69 forward Cassegrain design, with a 2.75m diameter M2, and three silica lenses, of largest diameter 1.33m. The field-of-view is again 1.52deg. The f/0.95 primary makes the design remarkably compact, being under 10m long. The ADC action involves a small motion of M2 (again via a hexapod), and shifts and tilts of a single lens. The design is effectively pupil-centric, with modest vignetting (5.9% average). The image quality is virtually identical to the prime focus design.
The Maunakea Spectroscopic Explorer is a next-generation massively multiplexed spectroscopic facility currently under development in Hawaii. It is completely dedicated to large-scale spectroscopic surveys and will enable transformative science. In th is white paper we summarize the science case and describe the current state of the project.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا