اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدAstrometric and photometric accuracies in high contrast imaging: The SPHERE speckle calibration tool (SpeCal)
78
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The consortium of the Spectro-Polarimetric High-contrast Exoplanet REsearch installed at the Very Large Telescope (SPHERE/VLT) has been operating its guaranteed observation time (260 nights over five years) since February 2015. The main part of this time (200 nights) is dedicated to the detection and characterization of young and giant exoplanets on wide orbits. The large amount of data must be uniformly processed so that accurate and homogeneous measurements of photometry and astrometry can be obtained for any source in the field. To complement the European Southern Observatory pipeline, the SPHERE consortium developed a dedicated piece of software to process the data. First, the software corrects for instrumental artifacts. Then, it uses the speckle calibration tool (SpeCal) to minimize the stellar light halo that prevents us from detecting faint sources like exoplanets or circumstellar disks. SpeCal is meant to extract the astrometry and photometry of detected point-like sources (exoplanets, brown dwarfs, or background sources). SpeCal was intensively tested to ensure the consistency of all reduced images (cADI, Loci, TLoci, PCA, and others) for any SPHERE observing strategy (ADI, SDI, ASDI as well as the accuracy of the astrometry and photometry of detected point-like sources. SpeCal is robust, user friendly, and efficient at detecting and characterizing point-like sources in high contrast images. It is used to process all SPHERE data systematically, and its outputs have been used for most of the SPHERE consortium papers to date. SpeCal is also a useful framework to compare different algorithms using various sets of data (different observing modes and conditions). Finally, our tests show that the extracted astrometry and photometry are accurate and not biased.
قيم البحث
اقرأ أيضاً
Photometric and astrometric monitoring of directly imaged exoplanets will deliver unique insights into their rotational periods, the distribution of cloud structures, weather, and orbital parameters. As the host star is occulted by the coronagraph, a
speckle grid (SG) is introduced to serve as astrometric and photometric reference. Speckle grids are implemented as diffractive pupil-plane optics that generate artificial speckles at known location and brightness. Their performance is limited by the underlying speckle halo caused by evolving uncorrected wavefront errors. The speckle halo will interfere with the coherent SGs, affecting their photometric and astrometric precision. Our aim is to show that by imposing opposite amplitude or phase modulation on the opposite polarization states, a SG can be instantaneously incoherent with the underlying halo, greatly increasing the precision. We refer to these as vector speckle grids (VSGs). We derive analytically the mechanism by which the incoherency arises and explore the performance gain in idealised simulations under various atmospheric conditions. We show that the VSG is completely incoherent for unpolarized light and that the fundamental limiting factor is the cross-talk between the speckles in the grid. In simulation, we find that for short-exposure images the VSG reaches a $sim$0.3-0.8% photometric error and $sim$$3-10cdot10^{-3}$ $lambda/D$ astrometric error, which is a performance increase of a factor $sim$20 and $sim$5, respectively. Furthermore, we outline how VSGs could be implemented using liquid-crystal technology to impose the geometric phase on the circular polarization states. The VSG is a promising new method for generating a photometric and astrometric reference SG that has a greatly increased astrometric and photometric precision.
We present a study of the HD 165054 astrometric calibration field that has been periodically observed with the Gemini Planet Imager. HD 165054 is a bright star within Baades Window, a region of the galactic plane with relatively low extinction from i
nterstellar dust. HD 165054 was selected as a calibrator target due to the high number density of stars within this region ($sim 3$ stars per square arcsecond with $H<22$), necessary because of the small field-of-view of the Gemini Planet Imager. Using nine epochs spanning over five years, we have fit a standard five-parameter astrometric model to the astrometry of seven background stars within close proximity to HD 165054 (angular separation $< 2$ arcsec). We achieved a proper motion precision of $sim 0.3$ mas/yr, and constrained the parallax of each star to be $lesssim 1$ mas. Our measured proper motions and parallax limits are consistent with the background stars being a part of the galactic bulge. Using these measurements we find no evidence of any systematic trend of either the plate scale or the north angle offset of GPI between 2014 and 2019. We compared our model describing the motions of the seven background stars to observations of the same field in 2014 and 2018 obtained with Keck/NIRC2, an instrument with an excellent astrometric calibration. We find that predicted position of the background sources is consistent with that measured by NIRC2, within the uncertainties of the calibration of the two instruments. In the future, we will use this field as a standard astrometric calibrator for the upgrade of GPI and potentially for other high-contrast imagers.
We present the details of the photometric and astrometric calibration of the Pan-STARRS1 $3pi$ Survey. The photometric goals were to reduce the systematic effects introduced by the camera and detectors, and to place all of the observations onto a pho
tometric system with consistent zero points over the entire area surveyed, the ~30,000 square degrees north of $delta$ = -30 degrees. The astrometric calibration compensates for similar systematic effects so that positions, proper motions, and parallaxes are reliable as well. The Pan-STARRS Data Release 2 (DR2) astrometry is tied to the Gaia DR1 release.
Orbital monitoring of exoplanetary and stellar systems is fundamental for analysing their architecture, dynamical stability and evolution, and mechanisms of formation. Current high-contrast extreme-adaptive optics imagers like SPHERE, GPI, and SCExAO
+CHARIS explore the population of giant exoplanets and brown dwarf and stellar companions beyond typically 10 au, covering generally a small fraction of the orbit (<20%) leading to degeneracies and biases in the orbital parameters. Precise and robust measurements over time of the position of the companions are critical, which require good knowledge of the instrumental limitations and dedicated observing strategies. The homogeneous dedicated calibration strategy for astrometry implemented for SPHERE has facilitated high-precision studies by its users since its start of operation in 2014. As the precision of exoplanet imaging instruments is now reaching milliarcseconds and is expected to improve with the upcoming facilities, we initiated a community effort, triggered by the SPHERE experience, to share lessons learned for high-precision astrometry in direct imaging. A homogeneous strategy would strongly benefit the VLT community, in synergy with VLTI instruments like GRAVITY/GRAVITY+, future instruments like ERIS and MAVIS, and in preparation for the exploitation of the ELTs first instruments MICADO, HARMONI, and METIS.
In this paper, we present an original observational approach, which combines, for the first time, traditional speckle imaging with image post-processing to obtain in the optical domain diffraction-limited images with high contrast (1e-5) within 0.5 t
o 2 arcseconds around a bright star. The post-processing step is based on wavelet filtering an has analogy with edge enhancement and high-pass filtering. Our I-band on-sky results with the 2.5-m Nordic Telescope (NOT) and the lucky imaging instrument FASTCAM show that we are able to detect L-type brown dwarf companions around a solar-type star with a contrast DI~12 at 2 and with no use of any coronographic capability, which greatly simplifies the instrumental and hardware approach. This object has been detected from the ground in J and H bands so far only with AO-assisted 8-10 m class telescopes (Gemini, Keck), although more recently detected with small-class telescopes in the K band. Discussing the advantage and disadvantage of the optical regime for the detection of faint intrinsic fluxes close to bright stars, we develop some perspectives for other fields, including the study of dense cores in globular clusters. To the best of our knowledge this is the first time that high contrast considerations are included in optical speckle imaging approach.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
