اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدALMA unveils rings and gaps in the protoplanetary system HD 169142: signatures of two giant protoplanets
105
0
0.0
(
0
)
تأليف
D. Fedele
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The protoplanetary system HD 169142 is one of the few cases where a potential candidate protoplanet has been recently detected via direct imaging. To study the interaction between the protoplanet and the disk itself observations of the gas and dust surface density structure are needed. This paper reports new ALMA observations of the dust continuum at 1.3,mm, $^{12}$CO, $^{13}$CO and C$^{18}$O $J=2-1$ emission from the system HD 169142 at angular resolution of $sim 0.18 - 0.28$ ($sim 20,$au$ - 33,$au). The dust continuum emission reveals a double-ring structure with an inner ring between $0.17-0.28$ ($sim 20 - 35,$au) and an outer ring between $0.48-0.64$ ($sim 56 - 83,$au). The size and position of the inner ring is in good agreement with previous polarimetric observations in the near-infrared and is consistent with dust trapping by a massive planet. No dust emission is detected inside the inner dust cavity ($R lesssim 20,$au) or within the dust gap ($sim 35 - 56,$au). In contrast, the channel maps of the $J=2-1$ line of the three CO isotopologues reveal the presence of gas inside the dust cavity and dust gap. The gaseous disk is also much larger than the compact dust emission extending to $sim 1.5$ ($sim 180,$au) in radius. This difference and the sharp drop of the continuum emission at large radii point to radial drift of large dust grains ($>$ micron-size). Using the thermo-chemical disk code textsc{dali}, the continuum and the CO isotopologues emission are modelled to quantitatively measure the gas and dust surface densities. The resulting gas surface density is reduced by a factor of $sim 30-40$ inward of the dust gap. The gas and dust distribution hint at the presence of multiple planets shaping the disk structure via dynamical clearing (dust cavity and gap) and dust trapping (double ring dust distribution).
قيم البحث
اقرأ أيضاً
We present a detailed multi-wavelength characterization of the multi-ring disk of HD 169142. We report new ALMA observations at 3 mm and analyze them together with archival 0.89 and 1.3 mm data. Our observations resolve three out of the four rings in
the disk previously seen in high-resolution ALMA data. A simple parametric model is used to estimate the radial profile of the dust optical depth, temperature, density, and particle size distribution. We find that the multiple ring features of the disk are produced by annular accumulations of large particles, probably associated with gas pressure bumps. Our model indicates that the maximum dust grain size in the rings is $sim1$ cm, with slightly flatter power-law size distributions than the ISM-like size distribution ($psim3.5$) found in the gaps. In particular, the inner ring ($sim26$ au) is associated with a strong and narrow buildup of dust particles that could harbor the necessary conditions to trigger the streaming instability. According to our analysis, the snowlines of the most important volatiles do not coincide with the observed substructures. We explore different ring formation mechanisms and find that planet-disk interactions are the most likely scenario to explain the main features of HD 169142. Overall, our multi-wavelength analysis provides some of the first unambiguous evidence of the presence of radial dust traps in the rings of HD 169142. A similar analysis in a larger sample of disks could provide key insights on the impact that disk substructures have on the dust evolution and planet formation processes.
This work aims to understand which midplane conditions are probed by the DCO$^+$ emission in the disk around the Herbig Ae star HD 169142. We explore the sensitivity of the DCO$^+$ formation pathways to the gas temperature and the CO abundance. The D
CO$^+$ $J$=3-2 transition was observed with ALMA at a spatial resolution of 0.3. The HD 169142 DCO$^+$ radial intensity profile reveals a warm, inner component at radii <30 AU and a broad, ring-like structure from ~50-230 AU with a peak at 100 AU just beyond the millimeter grain edge. We modeled DCO$^+$ emission in HD 169142 with a physical disk structure adapted from the literature, and employed a simple deuterium chemical network to investigate the formation of DCO$^+$ through the cold deuterium fractionation pathway via H$_2$D$^+$. Contributions from the warm deuterium fractionation pathway via CH$_2$D$^+$ are approximated using a constant abundance in the intermediate disk layers. Parameterized models show that alterations to the midplane gas temperature and CO abundance of the literature model are both needed to recover the observed DCO$^+$ radial intensity profile. The best-fit model contains a shadowed, cold midplane in the region z/r < 0.1 with an 8 K decrease in gas temperature and a factor of five CO depletion just beyond the millimeter grain edge, and a 2 K decrease in gas temperature for r > 120 AU. The warm deuterium fractionation pathway is implemented as a constant DCO$^+$ abundance of 2.0$times$10$^{-12}$ between 30-70 K. The DCO$^+$ emission probes a reservoir of cold material in the HD 169142 outer disk that is not revealed by the millimeter continuum, the SED, nor the emission from the 12CO, 13CO, or C18O $J$=2-1 lines.
Rings are the most frequently revealed substructure in ALMA dust observations of protoplanetary disks, but their origin is still hotly debated. In this paper, we identify dust substructures in 12 disks and measure their properties to investigate how
they form. This subsample of disks is selected from a high-resolution ($sim0.12$) ALMA 1.33 mm survey of 32 disks in the Taurus star-forming region, which was designed to cover a wide range of sub-mm brightness and to be unbiased to previously known substructures. While axisymmetric rings and gaps are common within our sample, spiral patterns and high contrast azimuthal asymmetries are not detected. Fits of disk models to the visibilities lead to estimates of the location and shape of gaps and rings, the flux in each disk component, and the size of the disk. The dust substructures occur across a wide range of stellar mass and disk brightness. Disks with multiple rings tend to be more massive and more extended. The correlation between gap locations and widths, the intensity contrast between rings and gaps, and the separations of rings and gaps could all be explained if most gaps are opened by low-mass planets (super-Earths and Neptunes) in the condition of low disk turbulence ($alpha=10^{-4}$). The gap locations are not well correlated with the expected locations of CO and N$_2$ ice lines, so condensation fronts are unlikely to be a universal mechanism to create gaps and rings, though they may play a role in some cases.
Spatially resolved continuum observations of planet-forming disks show prominent ring and gap structures in their dust distribution. However, the picture from gas observations is much less clear and constraints on the radial gas density structure (i.
e. gas gaps) remain rare and uncertain. We want to investigate the importance of thermo-chemical processes for the interpretation of high-spatial-resolution gas observations of planet-forming disks and their impact on derived gas properties. We apply the radiation thermo-chemical disk code ProDiMo (PROtoplanetary DIsk MOdel) to model self-consistently the dust and gas disk of HD 163296, using the DSHARP gas and dust observations. With this model we investigate the impact of dust gaps and gas gaps, considering chemistry and heating/cooling processes, on the observables and the derived gas properties. We find distinct peaks in the radial line intensity profiles of the CO line data of HD 163296 at the location of the dust gaps. Our model indicates that those peaks are not only a consequence of a gas temperature increase within the gaps but are mainly caused by the absorption of line emission from the back side of the disk by the dust rings. For two of the three prominent dust gaps in HD 163296, we find that thermo-chemical effects are negligible for deriving density gradients via measurements of the rotation velocity. However, for the gap with the highest dust depletion, the temperature gradient can be dominant and needs to be considered to derive accurate gas density profiles. Self-consistent gas and dust thermo-chemical modelling in combination with high-quality observations of multiple molecules are necessary to accurately derive gas gap depths and shapes. This is crucial to determine the origin of gaps and rings in planet-forming disks and to improve the mass estimates of forming planets if they are the cause of the gap.
Context: The complex system HD 100453 AB with a ring-like circumprimary disk and two spiral arms, one of which is pointing to the secondary, is a good laboratory to test spiral formation theories. Aims: To quantify the interaction of HD 100453 B with
the circumprimary disk. Methods: Using ALMA band 6 dust continuum and CO isotopologue observations we study the HD 100453 AB system with a spatial resolution of 0.09 x 0.17 at 234 GHz. We use SPH simulations and orbital fitting to investigate the tidal influence of the companion on the disk. Results: We resolve the continuum emission around HD 100453 A into a disk between 0.22 and 0.40 with an inclination of 29.5 deg. and a position angle of 151.0 deg., an unresolved inner disk, and excess mm emission cospatial with the northern spiral arm which was previously detected using scattered light observations. We also detect CO emission from 7 au (well within the disk cavity) out to 1.10, i.e., overlapping with HD 100453 B at least in projection. The outer CO disk PA and inclination differ by up to 10 deg. from the values found for the inner CO disk and the dust continuum emission, which we interpret as due to gravitational interaction with HD 100453 B. Both the spatial extent of the CO disk and the detection of mm emission at the same location as the northern spiral arm are in disagreement with the previously proposed near co-planar orbit of HD 100453 B. Conclusions: We conclude that HD 100453 B has an orbit that is significantly misaligned with the circumprimary disk. Because it is unclear whether such an orbit can explain the observed system geometry we highlight an alternative scenario that explains all detected disk features where another, (yet) undetected, low mass close companion within the disk cavity, shepherds a misaligned inner disk whose slowly precessing shadows excite the spiral arms.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
