اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدOverview of the SOFIA Data Processing System: A generalized system for manual and automatic data processing at the SOFIA Science Center
117
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The Stratospheric Observatory for Infrared Astronomy (SOFIA) is an airborne astronomical observatory comprised of a 2.5-meter telescope mounted in the aft section of a Boeing 747SP aircraft. During routine operations, several instruments will be available to the astronomical community including cameras and spectrographs in the near- to far-IR. Raw data obtained in-flight require a significant amount of processing to correct for background emission (from both the telescope and atmosphere), remove instrumental artifacts, correct for atmospheric absorption, and apply both wavelength and flux calibration. In general, this processing is highly specific to the instrument and telescope. In order to maximize the scientific output of the observatory, the SOFIA Science Center must provide these post-processed data sets to Guest Investigators in a timely manner. To meet this requirement, we have designed and built the SOFIA Data Processing System (DPS): an in-house set of tools and services that can be used in both automatic (pipeline) and manual modes to process data from a variety of instruments. Here we present an overview of the DPS concepts and architecture, as well as operational results from the first two SOFIA observing cycles (2013--2014).
قيم البحث
اقرأ أيضاً
The Pan-STARRS Data Processing System is responsible for the steps needed to downloaded, archive, and process all images obtained by the Pan-STARRS telescopes, including real-time detection of transient sources such as supernovae and moving objects i
ncluding potentially hazardous asteroids. With a nightly data volume of up to 4 terabytes and an archive of over 4 petabytes of raw imagery, Pan-STARRS is solidly in the realm of Big Data astronomy. The full data processing system consists of several subsystems covering the wide range of necessary capabilities. This article describes the Image Processing Pipeline and its connections to both the summit data systems and the outward-facing systems downstream. The latter include the Moving Object Processing System (MOPS) & the public database: the Published Science Products Subsystem (PSPS).
GWAC will have been built an integrated FOV of 5,000 $degree^2$ and have already built 1,800 square $degree^2$. The limit magnitude of a 10-second exposure image in the moonless night is 16R. In each observation night, GWAC produces about 0.7TB of ra
w data, and the data processing pipeline generates millions of single frame alerts. We describe the GWAC Data Processing and Management System (GPMS), including hardware architecture, database, detection-filtering-validation of transient candidates, data archiving, and user interfaces for the check of transient and the monitor of the system. GPMS combines general technology and software in astronomy and computer field, and use some advanced technologies such as deep learning. Practical results show that GPMS can fully meet the scientific data processing requirement of GWAC. It can online accomplish the detection, filtering and validation of millions of transient candidates, and feedback the final results to the astronomer in real-time. During the observation from October of 2018 to December of 2019, we have already found 102 transients.
CHARIS is an IFS designed for imaging and spectroscopy of disks and sub-stellar companions. To improve ease of use and efficiency of science production, we present progress on a fully-automated backend for CHARIS. This Automated Data Extraction, Proc
essing, and Tracking System (ADEPTS) will log data files from CHARIS in a searchable database and perform all calibration and data extraction, yielding science-grade data cubes. The extracted data will also be run through a preset array of post-processing routines. With significant parallelization of data processing, ADEPTS will dramatically reduce the time between data acquisition and the availability of science-grade data products.
The Dark Energy Survey (DES) is a 5000 deg2 grizY survey reaching characteristic photometric depths of 24th magnitude (10 sigma) and enabling accurate photometry and morphology of objects ten times fainter than in SDSS. Preparations for DES have incl
uded building a dedicated 3 deg2 CCD camera (DECam), upgrading the existing CTIO Blanco 4m telescope and developing a new high performance computing (HPC) enabled data management system (DESDM). The DESDM system will be used for processing, calibrating and serving the DES data. The total data volumes are high (~2PB), and so considerable effort has gone into designing an automated processing and quality control system. Special purpose image detrending and photometric calibration codes have been developed to meet the data quality requirements, while survey astrometric calibration, coaddition and cataloging rely on new extensions of the AstrOmatic codes which now include tools for PSF modeling, PSF homogenization, PSF corrected model fitting cataloging and joint model fitting across multiple input images. The DESDM system has been deployed on dedicated development clusters and HPC systems in the US and Germany. An extensive program of testing with small rapid turn-around and larger campaign simulated datasets has been carried out. The system has also been tested on large real datasets, including Blanco Cosmology Survey data from the Mosaic2 camera. In Fall 2012 the DESDM system will be used for DECam commissioning, and, thereafter, the system will go into full science operations.
The 24 micron array on board the Spitzer Space Telescope is one of three arrays in the Multi-band Imaging Photometer for Spitzer (MIPS) instrument. It provides 5.3 x 5.3 arcmin images at a scale of ~2.5 arcsec per pixel corresponding to sampling of t
he point spread function which is slightly better than critical (~0.4lambda/D). A scan-mirror allows dithering of images on the array without the overhead of moving and stabilizing the spacecraft. It also enables efficient mapping of large areas of sky without significant compromise in sensitivity. We present an overview of the pipeline flow and reduction steps involved in the processing of image data acquired with the 24 micron array. Residual instrumental signatures not yet removed in automated processing and strategies for hands-on mitigation thereof are also given.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
