اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدGraphene Based Optical Phase Modulation
385
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
In this paper we report phase modulation obtained by inducing a capacitive charge on graphene layers embedded in the core of a waveguide. There is a biasing regime in which graphene absorption is negligible but large index variations can be achieved with a voltage-length product as small as $V_pi,L_pi simeq 0.04 $,V,cm . Examples of phase induced changes are computed for straight waveguides and for microring resonators showing the possibility to implement several optoelectronic functionalities as modulators, tunable filters, and switches.
قيم البحث
اقرأ أيضاً
We propose a method to generate stabilized radio-frequency polarization modulation based on optical frequency combs. Two pulse trains with the same repetition rate and different offset frequencies generate arbitrary polarization states that are modul
ated at the offset frequency difference. Long-term stability of the polarization modulation is demonstrated with the modulation frequency at frep/2. Modulation at frep/4 is also demonstrated to show the flexibility of the technique. We employ an electrical delay line to fine-tune the polarization states that constitute the time-dependent modulation.
We theoretically study the spatial focusing of surface polaritons (SPs) in a negative index metamaterial (NIMM)-atomic gas interface waveguide system, based on cross phase modulation (XPM) in a tripod type double electromagnetically induced transpare
ncy (EIT) scheme. In the linear region, we realize the low loss stable propagation of SPs, and the group velocities of the probe and signal fields are well matched via double EIT. In the nonlinear region, we show that giant enhancement of the XPM can be obtained. Using a narrow optical soliton in free space, we realize spatial focusing of the SPs solitons, including bright, multi bright, and dark solitons. The full width at the half-maximum (FWHM) of the SPs soliton can be compressed to about ten nanometers, thus, even nanofucsing can be obtained. The results obtained here have certain theoretical significance for micro-nano optics, and also have application potentials in nano-scale sensing, spectral enhancement and precision measurement.
Extreme-ultraviolet (XUV) light is notoriously difficult to control due to its strong interaction cross-section with media. We demonstrate a method to overcome this problem by using Opto-Optical Modulation guided by a geometrical model to shape XUV l
ight. A bell-shaped infrared light pulse is shown to imprint a trace of its intensity profile onto the XUV light in the far-field, such that a change in the intensity profile of the infrared pulse leads to a change in the shape of the far-field XUV light. The geometrical model assists the user in predicting the effect of a specific intensity profile of the infrared pulse, thus enabling a deterministic process.
Dynamic color modulation in the composite structure of graphene microelectromechanical systems (MEMS)- photonic crystal microcavity is investigated in this work. The designed photonic crystal microcavity has three resonant standing wave modes corresp
onding to the three primary colors of red (R), green (G) and blue (B), forming strong localization of light in three modes at different positions of the microcavity. Once graphene is added, it can govern the transmittance of three modes. When graphene is located in the abdomen of the standing wave, which has strong light absorption and therefore the structures transmittance is lower, or when graphene is located in the node of the standing wave, it has weak light absorption and therefore the structures transmittance is higher. Therefore, the graphene absorption of different colors of light can be regulated dynamically by applying voltages to tune the equilibrium position of the graphene MEMS in the microcavity, consequently realizing the output of vivid monochromatic light or multiple mixed colors of light within a single pixel, thus greatly improving the resolution. Our work provides a route to dynamic color modulation with graphene and provides guidance for the design and manufacture of ultrahigh resolution, ultrafast modulation and wide color gamut interferometric modulator displays.
We observe a strong polarization dependent optical loss of in-plane light propagation in silicon waveguide due to the presence of graphene. Both transverse-electric (TE) and transverse-magnetic (TM) modes are efficiently (~3 dB) coupled to the graphe
ne on suspended membrane waveguides using an apodized focusing subwavelength grating. The TE mode has 7.7 dB less excess optical loss than the TM mode at 1.5 {mu}m for a 150 {mu}m long waveguide in good agreement with a theoretical model. All-optical modulation of light is demonstrated. There is also a large thermally induced change in waveguide effective index because of optical absorption in graphene.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
