اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدAtomically Controlled Epitaxial Growth of Single-Crystalline Germanium Films on a Metallic Silicide
286
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We demonstrate high-quality epitaxial germanium (Ge) films on a metallic silicide, Fe3Si, grown directly on a Ge(111) substrate. Using molecular beam epitaxy techniques, we can obtain an artificially controlled arrangement of silicon (Si) or iron (Fe) atoms at the surface on Fe3Si(111). The Si-terminated Fe3Si(111) surface enables us to grow two-dimensional epitaxial Ge films, whereas the Fe-terminated one causes the three-dimensional epitaxial growth of Ge films. The high-quality Ge grown on the Si-terminated surface has almost no strain, meaning that the Ge films are not grown on the low-temperature-grown Si buffer layer but on the lattice matched metallic Fe3Si. This study will open a new way for vertical-type Ge-channel transistors with metallic source/drain contacts.
قيم البحث
اقرأ أيضاً
The electronic, magnetic, thermoelectric, and topological properties of Heusler compounds (composition $XYZ$ or $X_2 YZ$) are highly sensitive to stoichiometry and defects. Here we establish the existence and experimentally map the bounds of a textit
{semi} adsorption-controlled growth window for semiconducting half Heusler FeVSb films, grown by molecular beam epitaxy (MBE). We show that due to the high volatility of Sb, the Sb stoichiometry is self-limiting for a finite range of growth temperatures and Sb fluxes, similar to the growth of III-V semiconductors such as GaSb and GaAs. Films grown within this window are nearly structurally indistinguishable by X-ray diffraction (XRD) and reflection high energy electron diffraction (RHEED). The highest electron mobility and lowest background carrier density are obtained towards the Sb-rich bound of the window, suggesting that Sb-vacancies may be a common defect. Similar textit{semi} adsorption-controlled bounds are expected for other ternary intermetallics that contain a volatile species $Z=${Sb, As, Bi}, e.g., CoTiSb, LuPtSb, GdPtBi, and NiMnSb. However, outstanding challenges remain in controlling the remaining Fe/V ($X/Y$) transition metal stoichiometry.
The properties of metal-semiconductor junctions are often unpredictable because of non-ideal interfacial structures, such as interfacial defects or chemical reactions introduced at junctions. Black phosphorus (BP), an elemental two-dimensional (2D) s
emiconducting crystal, possesses the puckered atomic structure with high chemical reactivity, and the establishment of a realistic atomic-scale picture of BPs interface toward metallic contact has remained elusive. Here we examine the interfacial structures and properties of physically-deposited metals of various kinds on BP. We find that Au, Ag, and Bi form single-crystalline films with (110) orientation through guided van der Waals epitaxy. Transmission electron microscopy and X-ray photoelectron spectroscopy confirm that atomically sharp van der Waals metal-BP interfaces forms with exceptional rotational alignment. Under a weak metal-BP interaction regime, the BPs puckered structure play an essential role in the adatom assembly process and can lead to the formation of a single crystal, which is supported by our theoretical analysis and calculations. The experimental survey also demonstrates that the BP-metal junctions can exhibit various types of interfacial structures depending on metals, such as the formation of polycrystalline microstructure or metal phosphides. This study provides a guideline for obtaining a realistic view on metal-2D semiconductor interfacial structures, especially for atomically puckered 2D crystals.
We report different growth modes and corresponding magnetic properties of thin EuSe films grown by molecular beam epitaxy on BaF2, Pb1-xEuxSe, GaAs, and Bi2Se3 substrates. We show that EuSe growth predominantly in (001) orientation on GaAs(111) and B
i2Se3, but along (111) crystallographic direction on BaF2 (111) and Pb1-xEuxSe (111). High-resolution transmission electron microscopy measurements reveal an abrupt and highly crystalline interface for both (001) and (111) EuSe films. In agreement with previous studies, ordered magnetic phases include antiferromagnetic, ferrimagnetic, and ferromagnetic phases. In contrast to previous studies, we found strong hysteresis for the antiferromagnetic-ferrimagnetic transition. An ability to grow epitaxial films of EuSe on Bi2Se3 and of Bi2Se3 on EuSe enables further investigation of interfacial exchange interactions between various phases of an insulating metamagnetic material and a topological insulator.
We report herein fabrication and characterization of a thin-film transistor (TFT) using single-crystalline, epitaxial SrTiO3 film, which was grown by a pulsed laser deposition technique followed by the thermal annealing treatment in an oxygen atmosph
ere. Although TFTs on the polycrystalline epitaxial SrTiO3 films (as-deposited) exhibited poor transistor characteristics, the annealed single-crystalline SrTiO3 TFT exhibits transistor characteristics comparable with those of bulk single-crystal SrTiO3 FET: an on/off current ratio >10^5, sub-threshold swing ~2.1 V/decade, and field-effect mobility ~0.8 cm^2/Vs. This demonstrates the effectiveness of the appropriate thermal annealing treatment of epitaxial SrTiO3 films.
SnTe belongs to the recently discovered class of topological crystalline insulators. Here we study the formation of line defects which break crystalline symmetry by strain in thin SnTe films. Strained SnTe(111) films are grown by molecular beam epita
xy on lattice- and thermal expansion coefficient-mismatched CdTe. To analyze the structural properties of the SnTe films we applied {em in-situ} reflection high energy electron diffraction, x-ray reflectometry, high resolution x-ray diffraction, reciprocal space mapping, and scanning tunneling microscopy. This comprehensive analytical approach reveals a twinned structure, tensile strain, bilayer surface steps and dislocation line defects forming a highly ordered dislocation network for thick films with local strains up to 31% breaking the translational crystal symmetry.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
