اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدGeometry-dependent critical currents in superconducting nanocircuits
134
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
In this paper we calculate the critical currents in thin superconducting strips with sharp right-angle turns, 180-degree turnarounds, and more complicated geometries, where all the line widths are much smaller than the Pearl length $Lambda = 2 lambda^2/d$. We define the critical current as the current that reduces the Gibbs free-energy barrier to zero. We show that current crowding, which occurs whenever the current rounds a sharp turn, tends to reduce the critical current, but we also show that when the radius of curvature is less than the coherence length this effect is partially compensated by a radius-of-curvature effect. We propose several patterns with rounded corners to avoid critical-current reduction due to current crowding. These results are relevant to superconducting nanowire single-photon detectors, where they suggest a means of improving the bias conditions and reducing dark counts. These results also have relevance to normal-metal nanocircuits, as these patterns can reduce the electrical resistance, electromigration, and hot spots caused by nonuniform heating.
قيم البحث
اقرأ أيضاً
The critical current of a thin superconducting strip of width $W$ much larger than the Ginzburg-Landau coherence length $xi$ but much smaller than the Pearl length $Lambda = 2 lambda^2/d$ is maximized when the strip is straight with defect-free edges
. When a perpendicular magnetic field is applied to a long straight strip, the critical current initially decreases linearly with $H$ but then decreases more slowly with $H$ when vortices or antivortices are forced into the strip. However, in a superconducting strip containing sharp 90-degree or 180-degree turns, the zero-field critical current at H=0 is reduced because vortices or antivortices are preferentially nucleated at the inner corners of the turns, where current crowding occurs. Using both analytic London-model calculations and time-dependent Ginzburg-Landau simulations, we predict that in such asymmetric strips the resulting critical current can be {it increased} by applying a perpendicular magnetic field that induces a current-density contribution opposing the applied current density at the inner corners. This effect should apply to all turns that bend in the same direction.
Vortex dynamics is strongly connected with the mechanisms responsible for the photon detection of superconducting devices. Indeed, the local suppression of superconductivity by photon absorption may trigger vortex nucleation and motion effects, which
can make the superconducting state unstable. In addition, scaling down the thickness of the superconducting films and/or the width of the bridge geometry can strongly influence the transport properties of superconducting films, e.g. affecting its critical current as well as its switching current into the normal state. Understanding such instability can boost the performances of those superconducting devices based on nanowire geometries. We present an experimental study on the resistive switching in NbN and NbTiN ultra-thin films with a thickness of few nanometers. Despite both films were patterned with the same microbridge geometry, the two superconducting materials show different behaviors at very low applied magnetic fields. A comparison with other low temperature superconducting materials outlines the influence of geometry effects on the superconducting transport properties of these materials particularly useful for devices applications.
The ability of type-II superconductors to carry large amounts of current at high magnetic fields is a key requirement for future design innovations in high-field magnets for accelerators and compact fusion reactors and largely depends on the vortex p
inning landscape comprised of material defects. The complex interaction of vortices with defects that can be grown chemically, e.g., self-assembled nanoparticles and nanorods, or introduced by post-synthesis particle irradiation precludes a priori prediction of the critical current and can result in highly non-trivial effects on the critical current. Here, we borrow concepts from biological evolution to create a genetic algorithm evolving pinning landscapes to accommodate vortex pinning and determine the best possible configuration of inclusions for two different scenarios: an evolution process starting from a pristine system and one with pre-existing defects to demonstrate the potential for a post-processing approach to enhance critical currents. Furthermore, the presented approach is even more general and can be adapted to address various other targeted material optimization problems.
Non-linear electrical transport studies at high-pulsed magnetic fields, above the range accessible by DC magnets, are of direct fundamental relevance to the physics of superconductors, domain-wall, charge-density waves, and topological semi-metal. Al
l-superconducting very-high field magnets also make it technologically relevant to study vortex matter in this regime. However, pulsed magnetic fields reaching 100 T in milliseconds impose technical and fundamental challenges that have prevented the realization of these studies. Here, we present a technique for sub-microsecond, smart, current-voltage measurements, which enables determining the superconducting critical current in pulsed magnetic fields, beyond the reach of any DC magnet. We demonstrate the excellent agreement of this technique with low DC field measurements on Y$_{0.77}$Gd$_{0.23}$Ba$_2$Cu$_3$O$_7$ coated conductors with and without BaHfO$_3$ nanoparticles. Exploring the uncharted high magnetic field region, we discover a characteristic influence of the magnetic field rate of change ($dH/dt$) on the current-voltage curves in a superconductor. We fully capture this unexplored vortex physics through a theoretical model based on the asymmetry of the vortex velocity profile produced by the applied current.
We report the temperature dependence of the transport critical current density (Jc) in textured Sr1-xKxFe2As2/Fe (Sr122) tapes fabricated by an ex situ powder-in-tube process. Critical currents were measured in magnetic fields up to 0-15 T and/or the
temperature range 4.2-30 K by using a dc four-probe method. It was found that textured Sr122 tapes heat-treated at low temperatures showed higher transport Jc performance due to much improved intergrain connections. At temperatures of 20 K, easily obtained using a cryocooler, Jc reached ~ 10^4 A/cm^2 in self field, which is the highest transport value of ferropnictide wires and tapes reported so far. Magneto-optical imaging observations further revealed significant and well distributed global Jc at 20 K in our tapes. These results demonstrate that 122 type superconducting tapes are promising for high-field applications at around 20 K.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
