ترغب بنشر مسار تعليمي؟ اضغط هنا

Effects of inert species in the gas phase in a model for the catalytic oxidation of CO

158   0   0.0 ( 0 )
 نشر من قبل Per Arne Rikvold
 تاريخ النشر 2011
  مجال البحث فيزياء
والبحث باللغة English
 تأليف G.M. Buendia




اسأل ChatGPT حول البحث

We study by kinetic Monte Carlo simulations the catalytic oxidation of carbon monoxide on a surface in the presence of contaminants in the gas phase. The process is simulated by a Ziff-Gulari-Barshad (ZGB) model that has been modified to include the effect of the contaminants and to eliminate the unphysical oxygen-poisoned phase. The impurities can adsorb and desorb on the surface, but otherwise remain inert. We find that, if the impurities can not desorb, no matter how small their proportion in the gas mixture, the first order transition and the reactive window that characterize the ZGB model disappear. The coverages become continuous, and once the surface has reached a steady state there is no production of CO$_2$. This is quite different from the behavior of a system in which the surface presents a fixed percentage of impurities. When the contaminants are allowed to desorb, the reactive window appears again, and disappears at a value that depends on the proportion of contaminants in the gas and on their desorption rate.



قيم البحث

اقرأ أيضاً

We present results of kinetic Monte Carlo simulations of a modified Ziff-Gulari-Barshad model for the reaction CO+O --> CO_2 on a catalytic surface. Our model includes impurities in the gas phase, CO desorption, and a modification known to eliminate the unphysical O poisoned phase. The impurities can adsorb and desorb on the surface, but otherwise remain inert. In a previous work that did not include CO desorption [G. M. Buendia and P. A. Rikvold, Phys. Rev. E, 85 031143 (2012)], we found that the impurities have very distinctive effects on the phase diagram and greatly diminish the reactivity of the system. If the impurities do not desorb, once the system reaches a stationary state, the CO_2 production disappears. When the impurities are allowed to desorb, there are regions where the CO_2 reaction window reappears, although greatly reduced. Following experimental evidence that indicates that temperature effects are crucial in many catalytic processes, here we further analyze these effects by including a CO desorption rate. We find that the CO desorption has the effect to smooth the transition between the reactive and the CO rich phase, and most importantly it can counteract the negative effects of the presence of impurities by widening the reactive window such that now the system remains catalytically active in the whole range of CO pressures.
97 - Frederic Buda 2007
This paper presents a modeling study of the oxidation of cyclohexane from low to intermediate temperature (650-1050 K), including the negative temperature coefficient (NTC) zone. A detailed kinetic mechanism has been developed using computer-aided ge neration. This comprehensive low-temperature mechanism involves 513 species and 2446 reactions and includes two additions of cyclohexyl radicals to oxygen, as well as subsequent reactions. The rate constants of the reactions involving the formation of bicyclic species (isomerizations, formation of cyclic ethers) have been evaluated from literature data. This mechanism is able to satisfactorily reproduce experimental results obtained in a rapid-compression machine for temperatures ranging from 650 to 900 K and in a jet-stirred reactor from 750 to 1050 K. Flow-rate analyses have been performed at low and intermediate temperatures.
397 - G.M. Buendia , E. Machado , 2009
We study the effect of coadsorption of CO and O on a Ziff-Gulari-Barshad (ZGB) model with CO desorption (ZGB-d) for the reaction CO + O --> CO_2 on a catalytic surface. Coadsorption of CO on a surface site already occupied by an O is introduced by an Eley-Rideal-type mechanism that occurs with probability p, 0 <= p <= 1. We find that, besides the well known effect of eliminating the second-order phase transition between the reactive state and an O-poisoned state, the coadsorption step has a strong effect on the transition between the reactive state and the CO-poisoned state. The coexistence curve between these two states terminates at a critical value k_c of the desorption rate k which now depends on p. Our Monte Carlo simulations and finite-size scale analysis indicate that k_c decreases with increasing values of p. For p=1, there appears to be a sharp phase transition between the two states only for k at(or near) zero.
67 - E. Machado 2005
We present a computational study of the dynamic behavior of a Ziff-Gulari-Barshad model of CO oxidation with CO desorption on a catalytic surface. Our results provide further evidence that below a critical desorption rate the model exhibits a non-equ ilibrium, first-order phase transition between low and high CO coverage phases. Our kinetic Monte Carlo simulations indicate that the transition process between these phases follows a decay mechanism very similar to the one described by the classic Kolmogorov-Johnson-Mehl-Avrami theory of phase transformation by nucleation and growth. We measure the lifetimes of the metastable phases on each side of the transition line and find that they are strongly dependent on the direction of the transformation, i.e., from low to high coverage or vice versa. Inspired by this asymmetry, we introduce a square-wave periodic external forcing, whose two parameters can be tuned to enhance the catalytic activity. At CO desorption rates below the critical value, we find that this far-from-equilibrium system undergoes a dynamic phase transition between a CO_2 productive phase and a nonproductive one. In the space of the parameters of the periodic external forcing, this nonequilibrium phase transition defines a line of critical points. The maximum enhancement rate for the CO_2 production rate occurs near this critical line.
75 - G.M. Buendia , E. Machado , 2006
We present a study of the dynamical behavior of a Ziff-Gulari-Barshad model with CO desorption and lateral diffusion. Depending on the values of the desorption and diffusion parameters, the system presents a discontinuous phase transition between low and high CO coverage phases. We calculate several points on the coexistence curve between these phases. Inclusion of the diffusion term produces a significant increase in the CO_2 production rate. We further applied a square-wave periodic pressure variation of the partial CO pressure with parameters that can be tuned to modify the catalytic activity. Contrary to the diffusion-free case, this driven system does not present a further enhancement of the catalytic activity, beyond the increase induced by the diffusion under constant CO pressure.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا