ترغب بنشر مسار تعليمي؟ اضغط هنا

Automatic Mirror Alignment for VIRGO: First experimental demonstration of the Anderson technique on a large-scale interferometer

156   0   0.0 ( 0 )
 نشر من قبل Andreas Freise
 تاريخ النشر 2004
  مجال البحث فيزياء
والبحث باللغة English
 تأليف A. Freise




اسأل ChatGPT حول البحث

The French-Italian interferometric gravitational wave detector VIRGO is currently being commissioned. Its principal instrument is a Michelson laser interferometer with 3 km long optical cavities in the arms and a power-recycling mirror. The interferometer resides in an ultra-high vacuum system and the mirrors are suspended from multistage pendulums for seismic isolation. This type of laser interferometer reaches its maximum sensitivity only when the optical setup is held actively very accurately at a defined operating point: control systems using the precise interferometer signals stabilise the longitudinal and angular positions of the optical component. This paper gives an overview of the control system for the angular degrees of freedom; we present the current status of the system and report the first experimental demonstration of the Anderson technique on a large-scale interferometer.



قيم البحث

اقرأ أيضاً

The Laser Interferometer Space Antenna (LISA) is being designed to detect and study in detail gravitational waves from sources throughout the Universe such as massive black hole binaries. The conceptual formulation of the LISA space-borne gravitation al wave detector is now well developed. The interferometric measurements between the sciencecraft remain one of the most important technological and scientific design areas for the mission. Our work has concentrated on developing the interferometric technologies to create a LISA-like optical signal and to measure the phase of that signal using commercially available instruments. One of the most important goals of this research is to demonstrate the LISA phase timing and phase reconstruction for a LISA-like fringe signal, in the case of a high fringe rate and a low signal level. We present current results of a test-bed interferometer designed to produce an optical LISA-like fringe signal previously discussed in the literature.
We propose using the LIGO-Virgo detector network as a Hanbury Brown--Twiss (HBT) interferometer. Our focus is on the behavior of the gravitational waves at the detector rather than the source. We examine HBT interferometry for gravitational waves fro m binary inspirals which are currently detectable with the LIGO-Virgo network. Previous work on HBT interferometry for gravitational waves has concentrated on characterization of both classical and non-classical properties of signals from cosmological sources in the early Universe which are not detectable by the LIGO-Virgo network. Since the HBT effect can be described equally via classical intensities or via quantum graviton creation/annihilation operators, observation of this effect would not provide an unambiguous demonstration of the quantization of gravity. However, the observation of the HBT effect by LIGO-Virgo would provide a new tool in the detection and analysis of gravitational wave signals.
Suppression of the scalar power spectrum on large scales is one way to reconcile the tension between Planck and BICEP2 data. This suppression can occur by introducing a phase transition from the fast-roll phase to the slow-roll phase in a single fiel d inflation model. In this paper we consider a deformed single field inflation model in terms of three SO(3) symmetric moduli fields. We find that spatially linear solutions for the moduli fields induces a phase transition during the early stage of the inflation and the suppression of scalar power spectrum at large scale perturbation modes.
91 - Fumiko Kawazoe 2008
Some next-generation gravitational-wave detectors, such as the American Advanced LIGO project and the Japanese LCGT project, plan to use power recycled resonant sideband extraction (RSE) interferometers for their interferometers optical configuration . A power recycled zero-detuning (PRZD) RSE interferometer, which is the default design for LCGT, has five main length degrees of freedom that need to be controlled in order to operate a gravitational-wave detector. This task is expected to be very challenging because of the complexity of optical configuration. A new control scheme for a PRZD RSE interferometer has been developed and tested with a prototype interferometer. The PRZD RSE interferometer was successfully locked with the control scheme. It is the first experimental demonstration of a PRZD RSE interferometer with suspended test masses. The result serves as an important step for the operation of LCGT.
We present results from a search for gravitational-wave bursts coincident with a set of two core-collapse supernovae observed between 2007 and 2011. We employ data from the Laser Interferometer Gravitational-wave Observatory (LIGO), the Virgo gravita tional-wave observatory, and the GEO 600 gravitational-wave observatory. The targeted core-collapse supernovae were selected on the basis of (1) proximity (within approximately 15 Mpc), (2) tightness of observational constraints on the time of core collapse that defines the gravitational-wave search window, and (3) coincident operation of at least two interferometers at the time of core collapse. We find no plausible gravitational-wave candidates. We present the probability of detecting signals from both astrophysically well-motivated and more speculative gravitational-wave emission mechanisms as a function of distance from Earth, and discuss the implications for the detection of gravitational waves from core-collapse supernovae by the upgraded Advanced LIGO and Virgo detectors.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا