ترغب بنشر مسار تعليمي؟ اضغط هنا

In Situ Photothermal Response of Single Gold Nanoparticles Through Hyperspectral Imaging AntiStokes Thermometry

93   0   0.0 ( 0 )
 نشر من قبل Julian Gargiulo Dr.
 تاريخ النشر 2021
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Several fields of applications require a reliable characterization of the photothermal response and heat dissipation of nanoscopic systems, which remains a challenging task both for modeling and experimental measurements. Here, we present a new implementation of anti-Stokes thermometry that enables the in situ photothermal characterization of individual nanoparticles (NPs) from a single hyperspectral photoluminescence confocal image. The method is label-free, applicable to any NP with detectable anti-Stokes emission, and does not require any prior information about the NP itself or the surrounding media. With it, we first studied the photothermal response of spherical gold NPs of different sizes on glass substrates, immersed in water, and found that heat dissipation is mainly dominated by the water for NPs larger than 50 nm. Then, the role of the substrate was studied by comparing the photothermal response of 80 nm gold NPs on glass with sapphire and graphene, two materials with high thermal conductivity. For a given irradiance level, the NPs reach temperatures 18% lower on sapphire and 24% higher on graphene than on bare glass. The fact that the presence of a highly conductive material such as graphene leads to a poorer thermal dissipation demonstrates that interfacial thermal resistances play a very significant role in nanoscopic systems, and emphasize the need for in situ experimental thermometry techniques. The developed method will allow addressing several open questions about the role of temperature in plasmon-assisted applications, especially ones where NPs of arbitrary shapes are present in complex matrixes and environments.



قيم البحث

اقرأ أيضاً

We propose a new approach to understand the time-dependent temperature increasing process of gold-silica core-shell nanoparticles injected into chicken tissues under near-infrared laser irradiation. Gold nanoshells strongly absorb near-infrared radia tions and efficiently transform absorbed energy into heat. Temperature rise given by experiments and numerical calculations based on bioheat transfer are in good agreement. Our work improves the analysis of a recent study [Richardson et al., Nano Lett. 9, 1139 (2009)] by including effects of the medium perfusion on temperature increase. The theoretical analysis can also be used to estimate the distribution of nanoparticles in experimental samples and provide a relative accuracy prediction for the temperature profile of new systems. This methodology would provide a novel and reliable tool for speeding up photothermal investigations and designing state-of-the-art photothermal devices.
Proximity of the metal nanoparticles enhance the plasmonic coupling and shifts the resonance. This article presents a numerical study of the photothermal effect in aggregates of small gold nanorods considering the ordered as well as random aggregates . In the ordered aggregates, there is lateral coupling which causes blueshifts in the plasmonic resonance, while in the random aggregates there are redshifts in the plasmonic resonance. The plasmon response of latter could be tailored up to the second infrared biological therapeutic window. It has been observed that the aggregates show higher absorption power and therefore, higher temperature rise compared to the single gold nanorod or monodispersive nanorods. The absorption resonance peak position of the random aggregate depends on the incident and polarization angles of the incident light. The aggregation of the nanoparticles often inherently occurs in the biological medium which affects the photothermal process. This study helps to understand the photothermal heating of nanoparticle aggregates and the use of the optimal light source concerning the absorption peak of the aggregates suspension for therapeutic uses.
Optical coherence tomography (OCT) is a high-resolution three-dimensional imaging technique that enables non-destructive measurements of surface and subsurface microstructures. Recent developments of OCT operating in the mid-infrared (MIR) range (aro und 4 {mu}m) lifted fundamental scattering limitations and initiated applied material research in formerly inaccessible fields. The MIR spectral region, however, is also of great interest for spectroscopy and hyperspectral imaging, which allow highly selective and sensitive chemical studies of materials. In this contribution, we introduce an OCT system (dual-band, central wavelengths of 2 {mu}m m and 4 {mu}m) combined with MIR spectroscopy that is implemented as a raster scanning chemical imaging modality. The fully-integrated and cost-effective optical instrument is based on a single supercontinuum laser source (emission spectrum spanning from 1.1 {mu}m to 4.4 {mu}m). Capabilities of the in-situ correlative measurements are experimentally demonstrated by obtaining complex multidimensional material data, comprising morphological and chemical information, from a multi-layered composite ceramic-polymer specimen.
116 - Stephane Berciaud 2007
The Photothermal Heterodyne Imaging method is used to study for the first time the absorption spectra of individual gold nanoparticles with diameters down to 5 nm. Intrinsic size effects wich result in a broadening of the Surface Plasmon resonance ar e unambiguously observed. Dispersions in the peak energies and homogeneous widths of the single particle resonances are revealed. The experimental results are analysed within the frame of Mie theory.
Silicon nanoparticles possess unique size-dependent optical properties due to their strong electric and magnetic resonances in the visible range. However, their widespread application has been limited, in comparison to other (e.g. metallic) nanoparti cles, because their preparation on monodisperse colloids remains challenging. Exploiting the unique properties of Si nanoparticles in nano- and micro-devices calls for methods able to sort and organize them from a colloidal suspension onto specific positions of solid substrates with nanometric precision. Here, we demonstrate that surfactant-free Silicon nanoparticles of a predefined and narrow ($sigma$ < 10 nm) size range can be selectively immobilized on a substrate by optical printing from a polydisperse colloidal suspension. The size selectivity is based on differential optical forces that can be applied on nanoparticles of different sizes by tuning the light wavelength to the size-dependent magnetic dipolar resonance of the nanoparticles.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا