اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدA novel method for monitoring proton beam spot using back-streaming secondary neutrons from the target
338
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The power of the proton beam of a high-power spallation neutron source generally ranges from 100 kW to several MW. The distribution of the power density of the beam on the target is critical for the stable operation of the high-power spallation target. This study proposes a beam monitoring method that involves restoring the image of a high-power proton beam spot on a target based on the principle of pinhole imaging by using the back-streaming of secondary neutrons from the spallation target. Fast and indirect imaging of the beam spot can be achieved at a distance of tens of meters from the target. The proposed method of beam monitoring can flexibly adjust the size of the pinhole and the measurement distance to control the intensity of flux of the secondary neutrons according to the demands of the detection system, which is far from the high-radiation target area. The results of simulations showed that the proposed method can be used to restore the beam spot of the incident proton by using the point response function and images of the secondary neutrons. Based on the target and the Back-n beamline in the CSNS, the effectiveness of this method has also been confirmed.
قيم البحث
اقرأ أيضاً
Muon beams are customarily obtained via $K/pi$ decays produced in proton interaction on target. In this paper we investigate the possibility to produce low emittance muon beams from electron-positron collisions at centre-of-mass energy just above the
$mu^{+}mu^{-}$ production threshold with maximal beam energy asymmetry, corresponding to a positron beam of about 45 GeV interacting on electrons on target. We present the main features of this scheme with an outline of the possible applications.
The experiment described in this paper is the first study of the response of a static tungsten powder sample to an impinging high energy proton beam pulse. The experiment was carried out at the HiRadMat facility at CERN. Observations include high spe
ed videos of a proton beam induced perturbation of the powder sample as well as data from a laser Doppler vibrometer measuring the oscillations of the powder container. A comparison with a previous analogous experiment which studied a proton beam interaction with mercury is made
The JASMIN Collaboration has performed an experiment to conduct measurements of nuclear reaction rates around the anti-proton production (Pbar) target at the Fermi National Accelerator Laboratory (FNAL). At the Pbar target station, the target, consis
ting an Inconel 600 cylinder, was irradiated by a 120 GeV/c proton beam from the FNAL Main Injector. The beam intensity was 3.6 x 10**12 protons per second. Samples of Al, Nb, Cu, and Au were placed near the target to investigate the spatial and energy distribution of secondary particles emitted from it. After irradiation, the induced activities of the samples were measured by studying their gamma ray spectra using HPGe detectors. The production rates of 30 nuclides induced in Al, Nb, Cu, Au samples were obtained. These rates increase for samples placed in a forward (small angle) position relative to the target. The angular dependence of these reaction rates becomes larger for increasing threshold energy. These experimental results are compared with Monte Carlo calculations. The calculated results generally agree with the experimental results to within a factor of 2 to 3.
The bent crystals are applied on large accelerators to deflect particle beams in process of extraction and collimation. Recently the proposals of fixed target researches in the LHC are formulated. For realization of this program not only deflection b
ut also focusing the LHC beam by bent crystals can be used. In the given work experimental results on 50 GeV proton beam focusing with the help of novel crystal device are reported. The positive property of this device is opportunity to work near the circulating beam of an accelerator, including the LHC.
During the proton-anti proton collider run several experiments were carried out in order to understand the effect of the beam-beam interaction on backgrounds and lifetimes. In this talk a selection of these experiments will be presented. From these e
xperiments, the importance of relative beam sizes and tune ripple could be demonstrated.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
