اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدEngineered Raman Lasing in Photonic Integrated Chalcogenide Microresonators
202
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Chalcogenide glass (ChG) is an attractive material for integrated nonlinear photonics due to its wide transparency and high nonlinearity, and its capability of being directly deposited and patterned on Silicon wafer substrates. It has a singular Raman effect among amorphous materials. Yet, the Raman lasing performance in high quality and chip integrated ChG microresonators remains unexplored. Here, we demonstrate an engineered Raman lasing dynamic based on home developed photonic integrated high-Q ChG microresonators. With a quality factor above 10^6, we achieve the record-low lasing threshold 3.25 mW among integrated planar photonic platforms. Both the single-mode Raman lasers and a broadband Raman-Kerr comb are observed and characterized, which is dependent on the dispersion of our flexible photonic platform and engineered via tuning the waveguide geometric size. The tunability of such a chipscale Raman laser is also demonstrated through tuning the pump wavelength and tuning the operating temperature on the chip. This allows for the access of single-mode lasing at arbitrary wavelengths in the range 1615-1755 nm. Our results may contribute to the understanding of rich Raman and Kerr nonlinear interactions in dissipative and nonlinear microresonators, and on application aspect, may pave a way to chip-scale efficient Raman lasers that is highly desired in spectroscopic applications in the infrared.
قيم البحث
اقرأ أيضاً
We report the first investigation on continuous-wave Raman lasing in high-quality-factor aluminum nitride (AlN) microring resonators. Although wurtzite AlN is known to exhibit six Raman-active phonons, single-mode Raman lasing with low threshold and
high slope efficiency is demonstrated. Selective excitation of A$_1^mathrm{TO}$ and E$_2^mathrm{high}$ phonons with Raman shifts of $sim$612 and 660 cm$^{-1}$ is observed by adjusting the polarization of the pump light. A theoretical analysis of Raman scattering efficiency within ${c}$-plane (0001) of AlN is carried out to help account for the observed lasing behavior. Bidirectional lasing is experimentally confirmed as a result of symmetric Raman gain in micro-scale waveguides. Furthermore, second-order Raman lasing with unparalleled output power of $sim$11.3 mW is obtained, which offers the capability to yield higher order Raman lasers for mid-infrared applications.
Propagation of light in a highly scattering medium is among the most fascinating optical effect that everyone experiences on an everyday basis and possesses a number of fundamental problems which have yet to be solved. Conventional wisdom suggests th
at non-linear effects do not play a significant role because the diffusive nature of scattering acts to spread the intensity, dramatically weakening these effects. We demonstrate the first experimental evidence of lasing on a Raman transition in a bulk three-dimensional random media. From a practical standpoint, Raman transitions allow for spectroscopic analysis of the chemical makeup of the sample. A random Raman laser could serve as a bright Raman source allowing for remote, chemically specific, identification of powders and aerosols. Fundamentally, the first demonstration of this new light source opens up an entire new field of study into non-linear light propagation in turbid media, with the most notable application related to non-invasive biomedical imaging.
Single photon-level quantum frequency conversion has recently been demonstrated using silicon nitride microring resonators. The resonance enhancement offered by such systems enables high-efficiency translation of quantum states of light across wide f
requency ranges at sub-watt pump powers. Using a quantum-mechanical Hamiltonian formalism, we present a detailed theoretical analysis of the conversion dynamics in these systems, and show that they are capable of converting single- and multi-photon quantum states. Analytic formulas for the conversion efficiency, spectral conversion probability density, and pump power requirements are derived which are in good agreement with previous theoretical and experimental results. We show that with only modest improvement to the state of the art, efficiencies exceeding 95% are achievable using less than 100 mW of pump power. At the critical driving strength that yields maximum conversion efficiency, the spectral conversion probability density is shown to exhibit a flat-topped peak, indicating a range of insensitivity to the spectrum of a single photon input. Two alternate theoretical approaches are presented to study the conversion dynamics: a dressed mode approach that yields a better intuitive picture of the conversion process, and a study of the temporal dynamics of the participating modes in the resonator, which uncovers a regime of Rabi-like coherent oscillations of single photons between two different frequency modes. This oscillatory regime arises from the strong coupling of distinct frequency modes mediated by coherent pumps.
We report on the fabrication of an ultrahigh quality factor, bottle-like microresonator from a microcapillary, and the realization of Raman lasing therein at pump wavelengths of $1.55~mathrm{mu m}$ and $780~mathrm{nm}$. The dependence of the Raman la
ser threshold on mode volume is investigated. The mode volume of the fundamental bottle mode is calculated and compared with that of a microsphere. Third-order cascaded Raman lasing was observed when pumped at $780~mathrm{nm}$. In principle, Raman lasing in a hollow bottle-like microresonator can be used in sensing applications. As an example, we briefly discuss the possibility of a high dynamic range, high resolution aerostatic pressure sensor.
Waves that are perfectly confined in the continuous spectrum of radiating waves without interaction with them are known as bound states in the continuum (BICs). Despite recent discoveries of BICs in nanophotonics, full routing and control of BICs are
yet to be explored. Here, we experimentally demonstrate BICs in a fundamentally new photonic architecture by patterning a low-refractive-index material on a high-refractive-index substrate, where dissipation to the substrate continuum is eliminated by engineering the geometric parameters. Pivotal BIC-based photonic components are demonstrated, including waveguides, microcavities, directional couplers, and modulators. Therefore, this work presents the critical step of photonic integrated circuits in the continuum, and enables the exploration of new single-crystal materials on an integrated photonic platform without the fabrication challenges of patterning the single-crystal materials. The demonstrated lithium niobate platform will facilitate development of functional photonic integrated circuits for optical communications, nonlinear optics at the single photon level as well as scalable photonic quantum information processors.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
