اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدPost-Metering Value-Added Services for Low Voltage Electricity Users: Lessons Learned From the Italian Experience of CHAIN 2
60
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Electrical energy consumption data accessibility for low voltage end users is one of the pillars of smart grids. In some countries, despite the presence of smart meters, a fragmentary data availability and/or the lack of standardization hinders the creation of post-metering value-added services and confines such innovative solutions to the prototypal and experimental level. We take inspiration from the technology adopted in Italy, where the national regulatory authority actively supported the definition of a solution agreed upon by all the involved stakeholders. In this context, smart meters are enabled to convey data to low voltage end users through a power line communication channel (CHAIN 2) in near real-time. The aim of this paper is twofold. On the one hand, it describes the proof of concept that the channel underwent and its subsequent validation (with performances nearing 99% success rate). On the other hand, it defines a classification framework (I2MA) for post-metering value-added services, in order to categorize each use case based on both level of service and expected benefits, and understand its maturity level. As an example, we apply the methodology to the 16 use cases defined in Italy. The lessons learned from the regulatory, technological, and functional approach of the Italian experience bring us to the provision of recommendations for researchers and industry experts. In particular, we argue that a well-functioning post-metering value-added services market can flourish when: i) distribution system operators certify the measurements coming from smart meters; ii) national regulatory authorities support the technological innovation needed for setting up this market; and iii) service providers create customer-oriented solutions based on smart meters data.
قيم البحث
اقرأ أيضاً
The need for Enhanced Frequency Response (EFR) is expected to increase significantly in future low-carbon Great Britain (GB) power system. One way to provide EFR is to use power electronic compensators (PECs) for point-of-load voltage control (PVC) t
o exploit the voltage dependence of loads. This paper investigates the techno-economic feasibility of such technology in future GB power system by quantifying the total EFR obtainable through deploying PVC in the urban domestic sector, the investment cost of the installment and the economic and environmental benefits of using PVC. The quantification is based on a stochastic domestic demand model and generic medium and low-voltage distribution networks for the urban areas of GB and a stochastic unit commitment (SUC) model with constraints for secure post-fault frequency evolution is used for the value assessment. Two future energy scenarios in the backdrop of 2030 with `smart and `non-smart control of electric vehicles and heat pumps, under different levels of penetration of battery energy storage system (BESS) are considered to assess the value of PEC, as well as the associated payback period. It is demonstrated that PVC could effectively complement BESS towards EFR provision in future GB power system.
Energy storage can be used for many applications in the Smart Grid such as energy arbitrage, peak demand shaving, power factor correction, energy backup to name a few, and can play a major role at increasing the capacity of power networks to host ren
ewable energy sources. Often, storage control algorithms will need to be textit{tailored} according to power networks billing structure, reliability restrictions, and other local power networks norms. In this paper we explore residential energy storage applications in Uruguay, one of the global leaders in renewable energies, where new low-voltage consumer contracts were recently introduced. Based on these billing mechanisms, we focus on energy arbitrage and reactive energy compensation with the aim of minimizing the cost of consumption of an end-user. Given that in the new contacts the buying and selling price of electricity are equal and that reactive power compensation is primarily governed by the installed converter, the storage operation is not sensitive to parameter uncertainties and, therefore, no lookahead is required for decision making. A threshold-based textit{hierarchical} controller is proposed which decides on the optimal active energy for arbitrage and uses the remaining converter capacity for reactive power compensation, which is shown to increase end-user profit. Numerical results indicate that storage could be profitable, even considering battery degradation, under some but not all of the studied contracts. For the cases in which it is not, we propose the best-suited contract. Results presented here can be naturally applied whenever the tariff structure satisfies the hypothesis considered in this work.
The present distribution grids generally have limited sensing capabilities and are therefore characterized by low observability. Improved observability is a prerequisite for increasing the hosting capacity of distributed energy resources such as sola
r photovoltaics (PV) in distribution grids. In this context, this paper presents learning-aided low-voltage estimation using untapped but readily available and widely distributed sensors from cable television (CATV) networks. The CATV sensors offer timely local voltage magnitude sensing with 5-minute resolution and can provide an order of magnitude more data on the state of a distribution system than currently deployed utility sensors. The proposed solution incorporates voltage readings from neighboring CATV sensors, taking into account spatio-temporal aspects of the observations, and estimates single-phase voltage magnitudes at all non-monitored buses using random forest. The effectiveness of the proposed approach was demonstrated using a 1572-bus feeder from the SMART-DS data set for two case studies - passive distribution feeder (without PV) and active distribution feeder (with PV). The analysis was conducted on simulated data, and the results show voltage estimates with a high degree of accuracy, even at extremely low percentages of observable nodes.
The 15th European Conference on Computer Systems (EuroSys20) was organized as a virtual (online) conference on April 27-30, 2020. The main EuroSys20 track took place April 28-30, 2020, preceded by five workshops (EdgeSys20, EuroDW20, EuroSec20, PaPoC
20, SPMA20) on April 27, 2020. The decision to hold a virtual (online) conference was taken in early April 2020, after consultations with the EuroSys community and internal discussions about potential options, eventually allowing about three weeks for the organization. This paper describes the choices we made to organize EuroSys20 as a virtual (online) conference, the challenges we addressed, and the lessons learned.
Frequency response and voltage support are vital ancillary services for power grids. In this paper, we design and experimentally validate a real-time control framework for battery energy storage systems (BESSs) to provide ancillary services to power
grids. The objective of the control system is to utilize the full capability of the BESSs to provide ancillary services. We take the voltage-dependent capability curve of the DC-AC converter and the security requirements of BESSs as constraints of the control system. The initial power set-points are obtained based on the droop control approach. To guarantee the feasibility of the power set-points with respect to both the converter capability and BESS security constraints, the final power set-points calculation is formulated as a nonconvex optimization problem. A convex and computationally efficient reformulation of the original control problem is then proposed. We prove that the proposed convex optimization gives the global optimal solution to the original nonconvex problem. We improve the computational performance of this algorithm by discretizing the feasible region of the optimization model. We achieve a 100 ms update time of the controller setpoint computation in the experimental validation of the utility-scale 720 kVA / 560 kWh BESS on the EPFL campus.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
