ﻻ يوجد ملخص باللغة العربية
We use electromigration (EM) to tune the oxygen content of YBa$_2$Cu$_3$O$_{7-delta}$ nanowires. During EM, the dopant oxygen atoms in the nanowire are displaced under the combined effect of electrostatic force and Joule heating. The EM current can be tuned to either deplete or replenish nanowire with oxygen, allowing fine tuning of its doping level. Transport measurements show that the quality of the nanowires is not influenced by the EM process. Kelvin probe force microscopy (KPFM) is used to image the electric properties of the nanowire at the nanoscale. This technique confirms the good homogeneity of the doping along the nanowires. Thus, EM provides an effective method to reproduce a large portion of the phase diagram on nanoscale.
We present the fabrication and electrical transport characterization of underdoped YBa$_2$Cu$_3$O$_{7-{delta}}$ nanowires. The nanowires have been realized without any protective capping layer and they show transport properties similar to those of th
Most measurements of critical current densities in YBa$_2$Cu$_3$O$_{7-delta}$ thin films to date have been performed on films where the textit{c}-axis is grown normal to the film surface. With such films, the analysis of the dependence of $j_c$ on th
We have grown and characterized 30 nm thick YBa$_2$Cu$_3$O$_{7-delta}$ (YBCO) films, deposited by pulsed laser deposition on both MgO (110) and SrTiO$_3$ (001) substrates, which induce opposite strain to the superconducting layer. By carefully tuning
An unusual noise component is found near and below about 250 K in the normal state of underdoped YBCO and Ca-YBCO films. This noise regime, unlike the more typical noise above 250 K, has features expected for a symmetry-breaking collective electronic
We report on the growth and characterization of ultrathin YBa$_2$Cu$_3$O$_{7-delta}$ (YBCO) films on MgO (110) substrates, which exhibit superconducting properties at thicknesses down to 3 nm. YBCO nanowires, with thicknesses down to 10 nm and widths