اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدContinuous User Authentication using IoT Wearable Sensors
225
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Over the past several years, the electrocardiogram (ECG) has been investigated for its uniqueness and potential to discriminate between individuals. This paper discusses how this discriminatory information can help in continuous user authentication by a wearable chest strap which uses dry electrodes to obtain a single lead ECG signal. To the best of the authors knowledge, this is the first such work which deals with continuous authentication using a genuine wearable device as most prior works have either used medical equipment employing gel electrodes to obtain an ECG signal or have obtained an ECG signal through electrode positions that would not be feasible using a wearable device. Prior works have also mainly dealt with using the ECG signal for identification rather than verification, or dealt with using the ECG signal for discrete authentication. This paper presents a novel algorithm which uses QRS detection, weighted averaging, Discrete Cosine Transform (DCT), and a Support Vector Machine (SVM) classifier to determine whether the wearer of the device should be positively verified or not. Zero intrusion attempts were successful when tested on a database consisting of 33 subjects.
قيم البحث
اقرأ أيضاً
Programmable Logic Controllers (PLCs) are a core component of an Industrial Control System (ICS). However, if a PLC is compromised or the commands sent across a network from the PLCs are spoofed, consequences could be catastrophic. In this work, a no
vel technique to authenticate PLCs is proposed that aims at raising the bar against powerful attackers while being compatible with real-time systems. The proposed technique captures timing information for each controller in a non-invasive manner. It is argued that Scan Cycle is a unique feature of a PLC that can be approximated passively by observing network traffic. An attacker that spoofs commands issued by the PLCs would deviate from such fingerprints. To detect replay attacks a PLC Watermarking technique is proposed. PLC Watermarking models the relationship between the scan cycle and the control logic by modeling the input/output as a function of request/response messages of a PLC. The proposed technique is validated on an operational water treatment plant (SWaT) and smart grid (EPIC) testbed. Results from experiments indicate that PLCs can be distinguished based on their scan cycle timing characteristics.
The major problem of user registration, mostly text base password, is well known. In the login user be inclined to select simple passwords which is frequently in mind that are straightforward for attackers to guess, difficult machine created password
mostly complicated to user take in mind. User authenticate password using cued click points and Persuasive Cued Click Points graphical password scheme which includes usability and security evaluations. This paper includes the persuasion to secure user authentication & graphical password using cued click-points so that users select more random or more difficult to guess the passwords. In click-based graphical passwords, image or video frame that provide database to load the image, and then store all information into database. Mainly passwords are composed of strings which have letters as well as digits. Example is alpha-numeric type letters and digits.
Implantable and wearable medical devices (IWMDs) are widely used for the monitoring and therapy of an increasing range of medical conditions. Improvements in medical devices, enabled by advances in low-power processors, more complex firmware, and wir
eless connectivity, have greatly improved therapeutic outcomes and patients quality-of-life. However, security attacks, malfunctions and sometimes user errors have raised great concerns regarding the safety of IWMDs. In this work, we present a HW/SW (Hardware/Software) framework for improving the safety of IWMDs, wherein a set of safety rules and a rule check mechanism are used to monitor both the extrinsic state (the patients physiological parameters sensed by the IWMD) and the internal state of the IWMD (I/O activities of the microcontroller) to infer unsafe operations that may be triggered by user errors, software bugs, or security attacks. We discuss how this approach can be realized in the context of a artificial pancreas with wireless connectivity and implement a prototype to demonstrate its effectiveness in improving safety at modest overheads.
Recurrent neural networks (RNNs) have shown promising results in audio and speech processing applications due to their strong capabilities in modelling sequential data. In many applications, RNNs tend to outperform conventional models based on GMM/UB
Ms and i-vectors. Increasing popularity of IoT devices makes a strong case for implementing RNN based inferences for applications such as acoustics based authentication, voice commands, and edge analytics for smart homes. Nonetheless, the feasibility and performance of RNN based inferences on resources-constrained IoT devices remain largely unexplored. In this paper, we investigate the feasibility of using RNNs for an end-to-end authentication system based on breathing acoustics. We evaluate the performance of RNN models on three types of devices; smartphone, smartwatch, and Raspberry Pi and show that unlike CNN models, RNN models can be easily ported onto resource-constrained devices without a significant loss in accuracy.
Photovoltaic (PV) cells have the potential to serve as on-board power sources for low-power IoT devices. Here, we explore the use of perovskite solar cells to power Radio Frequency (RF) backscatter-based IoT devices with a few {mu}W power demand. Per
ovskites are suitable for low-cost, high-performance, low-temperature processing, and flexible light energy harvesting that hold the possibility to significantly extend the range and lifetime of current backscatter techniques such as Radio Frequency Identification (RFID). For these reasons, perovskite solar cells are prominent candidates for future low-power wireless applications. We report on realizing a functional perovskite-powered wireless temperature sensor with 4 m communication range. We use a 10.1% efficient perovskite PV module generating an output voltage of 4.3 V with an active area of 1.06 cm2 under 1 sun illumination, with AM 1.5G spectrum, to power a commercial off-the-shelf RFID IC, requiring 10 - 45 {mu}W of power. Having an on-board energy harvester provides extra-energy to boost the range of the sensor (5x) in addition to providing energy to carry out high-volume sensor measurements (hundreds of measurements per min). Our evaluation of the prototype suggests that perovskite photovoltaic cells are able to meet the energy needs to enable fully autonomous low-power RF backscatter applications of the future. We conclude with an outlook into a range of applications that we envision to leverage the synergies offered by combining perovskite photovoltaics and RFID.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
