ترغب بنشر مسار تعليمي؟ اضغط هنا

Solenoid-free current drive via ECRH in EXL-50 spherical torus plasmas

116   0   0.0 ( 0 )
 نشر من قبل Yuejiang Shi
 تاريخ النشر 2021
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

As a new spherical tokamak (ST) designed to simplify engineering requirements of a possible future fusion power source, the EXL-50 experiment features a low aspect ratio (A) vacuum vessel (VV), encircling a central post assembly containing the toroidal field coil conductors. Multiple electron cyclotron resonance heating (ECRH) resonances are located within the VV to possibly improve current drive effectiveness. The energetic electrons are observed via hard X-ray detectors, carry the bulk of the plasma current ranging from 50kA to 150kA, which is maintained for more than 1s duration. It is observed that over one Ampere current can be maintained per Watt of ECRH power issued from the 28-GHz gyrotrons. The plasma current with high line-density (approaching 1019m-2) has been achieved for plasma currents as high as 76kA. An analysis was carried out combining reconstructed multi-fluid equilibrium, guiding-center orbits, and resonant heating mechanisms. It is verified that in EXL-50 a broadly distributed current of energetic electrons creates smaller closed magnetic-flux surfaces of low aspect ratio that in turn confine the thermal plasma electrons and ions and participate in maintaining the equilibrium force-balance.



قيم البحث

اقرأ أيضاً

The start-up and sustainment of a stochastic wave non-inductive current on a spherical torus was experimentally demonstrated for the first time using only electron cyclotron waves. The plasma current is insensitive to the injection angle of ECWs and approximately linearly correlated with the slope of the X-ray spectrum. Its direction is determined by the vertical magnetic field (BV). The temporal development in the number of X-ray bremsstrahlung photons with a specified energy is consistent with the stochastic heating model. Moreover, the ratio of Amps to Watts of the ECW is generally >1 kA/kW under normal conditions (maximum plasma current: 150 kA, ECW: 140 kW). The experimental results are explained using the stochastic heating model of the asymmetric electron velocity distribution in stochastic electromagnetic waves.
The effectiveness of multiple electron cyclotron resonance (ECR) harmonics has been thoroughly investigated in context of high current drive efficiency, generally observed in fully non-inductive operation of the low aspect ratio EXL-50 spherical toka mak (ST) powered by electron cyclotron (EC) waves. The Fokker-Plank equation is numerically solved to obtain electron distribution function, under steady state of the relativistic nonlinear Coulomb collision and quasi-linear diffusion operators, for calculating plasma current driven by the injected EC wave. For the extra-ordinary EC wave, simulation results unfold a mechanism by which electrons moving around the cold second harmonic ECR layer strongly resonate with higher harmonics via the relativistic Doppler shifted resonance condition. This feature is in fact evident above a certain value of input EC wave power in simulation, indicating it to be a non-linear phenomenon. Similar to the experimental observation, high efficiency in current drive (over 1 A/W) has indeed been found in simulation for a typical low density ($sim 1times10^{18}~m^{-3}$), low temperature ($lesssim 100$ eV) plasma of EXL-50 by taking into account multi-pass absorptions in our simulation model. However, such characteristic is not found in the ordinary EC-wave study for both single-pass and multi-pass simulations, suggesting it as inefficient in driving current on our ST device.
This work describes the scientific basis and associated simulation results for the magnetization of an unmagnetized plasma via beat wave current drive. Two-dimensional electromagnetic particle-in-cell simulations have been performed for a variety of angles between the injected waves to demonstrate beat wave generation in agreement with theoretical predictions of the beat-wave wave vector and saturation time, revealing new 2D effects. The simulations clearly demonstrate electron acceleration by the beat waves and resultant current drive and magnetic field generation. The basic process depends entirely on the angle between the parent waves and the ratio of the beat-wave phase velocity to the electron thermal velocity. The wave to magnetic energy conversion efficiency of the cases examined is as high as 0.2%. The technique could enable novel plasma experiments in which the use of magnetic coils is infeasible.
Fully non-inductive plasma current start-up without the central solenoid in ECW plasma was used on EXL-50 Spherical Torus with a weak external vertical field (Bv). Generally, the number of electrons leaving to the vessel wall by the gradient Bt is la rger than ions, and the positive potential was built up in plasma. The relationship between floating potential and the plasma current was studied using the Langmuir probes near the boundary. The results show that the floating potential is positive (about 200V) and has a strong correlation with plasma current. In open magnetic field, the plasma current is driven by the high energy electrons in preferential confinement, the plasma current and potential approximately positively correlated with total electron density. After forming the closed flux surface, the plasma current consists mainly of the ECW driven current, and potential is negatively correlated with plasma current. By actively adjusting the Bv, it demonstrated that the positive voltage is approximately inversely correlated with the Bv and plasma current (Ip). Considering that the plasma temperature near the boundary is quite low (~eV), the positive voltage near the boundary caused by the high-energy electron loss. Therefore, the measurements of the boundary potential are important for the study of high-energy electron confinement performance, noninductive plasma current start-up and current driven.
The electron Bernstein wave (EBW) is typically the only wave in the electron cyclotron (EC) range that can be applied in spherical tokamaks for heating and current drive (H&CD). Spherical tokamaks (STs) operate generally in high-beta regimes, in whic h the usual EC O- and X- modes are cut-off. In this case, EBWs seem to be the only option that can provide features similar to the EC waves---controllable localized H&CD that can be utilized for core plasma heating as well as for accurate plasma stabilization. The EBW is a quasi-electrostatic wave that can be excited by mode conversion from a suitably launched O- or X-mode; its propagation further inside the plasma is strongly influenced by the plasma parameters. These rather awkward properties make its application somewhat more difficult. In this paper we perform an extensive numerical study of EBW H&CD performance in four typical ST plasmas (NSTX L- and H-mode, MAST Upgrade, NHTX). Coupled ray-tracing (AMR) and Fokker-Planck (LUKE) codes are employed to simulate EBWs of varying frequencies and launch conditions, which are the fundamental EBW parameters that can be chosen and controlled. Our results indicate that an efficient and universal EBW H&CD system is indeed viable. In particular, power can be deposited and current reasonably efficiently driven across the whole plasma radius. Such a system could be controlled by a suitably chosen launching antenna vertical position and would also be sufficiently robust.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا