اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدReducing Solid-State Drive Read Latency by Optimizing Read-Retry
76
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
3D NAND flash memory with advanced multi-level cell techniques provides high storage density, but suffers from significant performance degradation due to a large number of read-retry operations. Although the read-retry mechanism is essential to ensuring the reliability of modern NAND flash memory, it can significantly increase the read latency of an SSD by introducing multiple retry steps that read the target page again with adjusted read-reference voltage values. Through a detailed analysis of the read mechanism and rigorous characterization of 160 real 3D NAND flash memory chips, we find new opportunities to reduce the read-retry latency by exploiting two advanced features widely adopted in modern NAND flash-based SSDs: 1) the CACHE READ command and 2) strong ECC engine. First, we can reduce the read-retry latency using the advanced CACHE READ command that allows a NAND flash chip to perform consecutive reads in a pipelined manner. Second, there exists a large ECC-capability margin in the final retry step that can be used for reducing the chip-level read latency. Based on our new findings, we develop two new techniques that effectively reduce the read-retry latency: 1) Pipelined Read-Retry (PR$^2$) and 2) Adaptive Read-Retry (AR$^2$). PR$^2$ reduces the latency of a read-retry operation by pipelining consecutive retry steps using the CACHE READ command. AR$^2$ shortens the latency of each retry step by dynamically reducing the chip-level read latency depending on the current operating conditions that determine the ECC-capability margin. Our evaluation using twelve real-world workloads shows that our proposal improves SSD response time by up to 31.5% (17% on average) over a state-of-the-art baseline with only small changes to the SSD controller.
قيم البحث
اقرأ أيضاً
3D NAND flash memory with advanced multi-level cell techniques provides high storage density, but suffers from significant performance degradation due to a large number of read-retry operations. Although the read-retry mechanism is essential to ensur
ing the reliability of modern NAND flash memory, it can significantly increase the read latency of an SSD by introducing multiple retry steps that read the target page again with adjusted read-reference voltage values. Through a detailed analysis of the read mechanism and rigorous characterization of 160 real 3D NAND flash memory chips, we find new opportunities to reduce the read-retry latency by exploiting two advanced features widely adopted in modern NAND flash-based SSDs: 1) the CACHE READ command and 2) strong ECC engine. First, we can reduce the read-retry latency using the advanced CACHE READ command that allows a NAND flash chip to perform consecutive reads in a pipelined manner. Second, there exists a large ECC-capability margin in the final retry step that can be used for reducing the chip-level read latency. Based on our new findings, we develop two new techniques that effectively reduce the read-retry latency: 1) Pipelined Read-Retry (PR$^2$) and 2) Adaptive Read-Retry (AR$^2$). PR$^2$ reduces the latency of a read-retry operation by pipelining consecutive retry steps using the CACHE READ command. AR$^2$ shortens the latency of each retry step by dynamically reducing the chip-level read latency depending on the current operating conditions that determine the ECC-capability margin. Our evaluation using twelve real-world workloads shows that our proposal improves SSD response time by up to 31.5% (17% on average) over a state-of-the-art baseline with only small changes to the SSD controller.
DRAM-based memory is a critical factor that creates a bottleneck on the system performance since the processor speed largely outperforms the DRAM latency. In this thesis, we develop a low-cost mechanism, called ChargeCache, which enables faster acces
s to recently-accessed rows in DRAM, with no modifications to DRAM chips. Our mechanism is based on the key observation that a recently-accessed row has more charge and thus the following access to the same row can be performed faster. To exploit this observation, we propose to track the addresses of recently-accessed rows in a table in the memory controller. If a later DRAM request hits in that table, the memory controller uses lower timing parameters, leading to reduced DRAM latency. Row addresses are removed from the table after a specified duration to ensure rows that have leaked too much charge are not accessed with lower latency. We evaluate ChargeCache on a wide variety of workloads and show that it provides significant performance and energy benefits for both single-core and multi-core systems.
Motivation: Optimizing seed selection is an important problem in read mapping. The number of non-overlapping seeds a mapper selects determines the sensitivity of the mapper while the total frequency of all selected seeds determines the speed of the m
apper. Modern seed-and-extend mappers usually select seeds with either an equal and fixed-length scheme or with an inflexible placement scheme, both of which limit the potential of the mapper to select less frequent seeds to speed up the mapping process. Therefore, it is crucial to develop a new algorithm that can adjust both the individual seed length and the seed placement, as well as derive less frequent seeds. Results: We present the Optimal Seed Solver (OSS), a dynamic programming algorithm that discovers the least frequently-occurring set of x seeds in an L-bp read in $O(x times L)$ operations on average and in $O(x times L^{2})$ operations in the worst case. We compared OSS against four state-of-the-art seed selection schemes and observed that OSS provides a 3-fold reduction of average seed frequency over the best previous seed selection optimizations.
Transformer-based pre-trained models, such as BERT, have achieved remarkable results on machine reading comprehension. However, due to the constraint of encoding length (e.g., 512 WordPiece tokens), a long document is usually split into multiple chun
ks that are independently read. It results in the reading field being limited to individual chunks without information collaboration for long document machine reading comprehension. To address this problem, we propose RoR, a read-over-read method, which expands the reading field from chunk to document. Specifically, RoR includes a chunk reader and a document reader. The former first predicts a set of regional answers for each chunk, which are then compacted into a highly-condensed version of the original document, guaranteeing to be encoded once. The latter further predicts the global answers from this condensed document. Eventually, a voting strategy is utilized to aggregate and rerank the regional and global answers for final prediction. Extensive experiments on two benchmarks QuAC and TriviaQA demonstrate the effectiveness of RoR for long document reading. Notably, RoR ranks 1st place on the QuAC leaderboard (https://quac.ai/) at the time of submission (May 17th, 2021).
Many quantum machine learning (QML) algorithms that claim speed-up over their classical counterparts only generate quantum states as solutions instead of their final classical description. The additional step to decode quantum states into classical v
ectors normally will destroy the quantum advantage in most scenarios because all existing tomographic methods require runtime that is polynomial with respect to the state dimension. In this Letter, we present an efficient readout protocol that yields the classical vector form of the generated state, so it will achieve the end-to-end advantage for those quantum algorithms. Our protocol suits the case that the output state lies in the row space of the input matrix, of rank $r$, that is stored in the quantum random access memory. The quantum resources for decoding the state in $ell_2$-norm with $epsilon$ error require $text{poly}(r,1/epsilon)$ copies of the output state and $text{poly}(r, kappa^r,1/epsilon)$ queries to the input oracles, where $kappa$ is the condition number of the input matrix. With our read-out protocol, we completely characterise the end-to-end resources for quantum linear equation solvers and quantum singular value decomposition. One of our technical tools is an efficient quantum algorithm for performing the Gram-Schmidt orthonormal procedure, which we believe, will be of independent interest.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
