ترغب بنشر مسار تعليمي؟ اضغط هنا

Resolving VLBI correlator ambiguity in the time delay model improves precision of geodetic measurements

86   0   0.0 ( 0 )
 نشر من قبل Oleg Titov
 تاريخ النشر 2021
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

The modern Very Long Baseline Interferometry (VLBI) relativistic delay model, as documented in the IERS Conventions refers to the time epoch when the signal passes one of two stations of an interferometer baseline (selected arbitrarily from the pair of stations and called the reference station, or station 1). This model consists of the previous correlation procedure used before the year 2002. However, since 2002 a new correlation procedure that produces the VLBI group delays referring to the time epoch of signal passage at the geocenter has been used. A corresponding correction to the conventional VLBI model delay has to be introduced. However, this correction has not been thoroughly presented in peer reviewed journals, and different approaches are used at the correlators to calculate the final group delays officially published in the IVS database. This may cause an inconsistency up to 6 ps for ground-based VLBI experiments between the group delay obtained by the correlator and the geometrical model delay from the IERS Conventions used in data analysis software. Moreover, a miscalculation of the signal arrival moment to the reference station could result a larger modelling error (up to 50 ps). The paper presents the justification of the correction due to transition between two epochs elaborated from the Lorentz transformation, and the approach to model the uncertainty of the calculation of the signal arrival moment. The both changes are particularly essential for upcoming broadband technology geodetic VLBI observations.



قيم البحث

اقرأ أيضاً

We present 27 geodetic VLBI maps of OJ 287 obtained from the archive of the Washington correlator. The observations presented here were made between 1990 October and 1996 December. During this period a sequence of six superluminal components has been identified. We measured the proper motion of these components to be approximately 0.5 mas/yr, which is about twice as high as that seen in previous VLBI observations. These results imply a higher component ejection rate than previously observed, in good agreement with the observed occurrences of radio outbursts. We have examined a possible connection between VLBI components and optical flares in the framework of a binary black hole system.
128 - Oleg Titov , Hana Krasna 2018
Geodetic Very Long Baseline Interferometry (VLBI) measures the group delay in the barycentric reference frame. As the Earth is orbiting around the Solar system barycentre with the velocity $V$ of 30 km/s, VLBI proves to be a handy tool to detect the subtle effects of the special and general relativity theory with a magnitude of $(V/textrm{c})^2$. The theoretical correction for the second order terms reaches up to 300~ps, and it is implemented in the geodetic VLBI group delay model. The total contribution of the second order terms splits into two effects - the variation of the Earth scale, and the deflection of the apparent position of the radio source. The Robertson-Mansouri-Sexl (RMS) generalization of the Lorenz transformation is used for many modern tests of the special relativity theory. We develop an alteration of the RMS formalism to probe the Lorenz invariance with the geodetic VLBI data. The kinematic approach implies three parameters (as a function of the moving reference frame velocity) and the standard Einstein synchronisation. A generalised relativistic model of geodetic VLBI data includes all three parameters that could be estimated. Though, since the modern laboratory Michelson-Morley and Kennedy-Thorndike experiments are more accurate than VLBI technique, the presented equations may be used to test the VLBI group delay model itself.
410 - V. Bonvin , M. Tewes , F. Courbin 2015
COSMOGRAIL is a long-term photometric monitoring of gravitationally lensed QSOs aimed at implementing Refsdals time-delay method to measure cosmological parameters, in particular H0. Given long and well sampled light curves of strongly lensed QSOs, t ime-delay measurements require numerical techniques whose quality must be assessed. To this end, and also in view of future monitoring programs or surveys such as the LSST, a blind signal processing competition named Time Delay Challenge 1 (TDC1) was held in 2014. The aim of the present paper, which is based on the simulated light curves from the TDC1, is double. First, we test the performance of the time-delay measurement techniques currently used in COSMOGRAIL. Second, we analyse the quantity and quality of the harvest of time delays obtained from the TDC1 simulations. To achieve these goals, we first discover time delays through a careful inspection of the light curves via a dedicated visual interface. Our measurement algorithms can then be applied to the data in an automated way. We show that our techniques have no significant biases, and yield adequate uncertainty estimates resulting in reduced chi2 values between 0.5 and 1.0. We provide estimates for the number and precision of time-delay measurements that can be expected from future time-delay monitoring campaigns as a function of the photometric signal-to-noise ratio and of the true time delay. We make our blind measurements on the TDC1 data publicly available
We report the results of a successful 7 hour 1.4 GHz VLBI experiment using two new stations, ASKAP-29 located in Western Australia and WARK12M located on the North Island of New Zealand. This was the first geodetic VLBI observing session with the par ticipation of these new stations. We have determined the positions of ASKAP-29 and WARK12M. Random errors on position estimates are 150-200 mm for the vertical component and 40-50 mm for the horizontal component. Systematic errors caused by the unmodeled ionosphere path delay may reach 1.3 m for the vertical component.
Very-long-baseline interferometry (VLBI) at frequencies above 230 GHz with Earth-diameter baselines gives spatial resolution finer than the ${sim}50 mu$as shadow of the supermassive black hole at the Galactic Center, Sagittarius A* (Sgr A*). Imaging static and dynamical structure near the shadow provides a test of general relativity and may allow measurement of black hole parameters. However, traditional Earth-rotation synthesis is inapplicable for sources (such as Sgr A*) with intra-day variability. Expansions of ground-based arrays to include space-VLBI stations may enable imaging capability on time scales comparable to the prograde innermost stable circular orbit (ISCO) of Sgr A*, which is predicted to be 4-30 minutes, depending on black hole spin. We examine the basic requirements for space-VLBI, and we develop tools for simulating observations with orbiting stations. We also develop a metric to quantify the imaging capabilities of an array irrespective of detailed image morphology or reconstruction method. We validate this metric on example reconstructions of simulations of Sgr A* at 230 and 345 GHz, and use these results to motivate expanding the Event Horizon Telescope (EHT) to include small dishes in Low Earth Orbit (LEO). We demonstrate that high-sensitivity sites such as the Atacama Large Millimeter/Submillimeter Array (ALMA) make it viable to add small orbiters to existing ground arrays, as space-ALMA baselines would have sensitivity comparable to ground-based non-ALMA baselines. We show that LEO-enhanced arrays sample half of the diffraction-limited Fourier plane of Sgr A* in less than 30 minutes, enabling reconstructions of near-horizon structure with normalized root-mean-square error $lesssim0.3$ on sub-ISCO timescales.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا