اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدPre-deployment Verification and Predicted Mapping Speed of MUSCAT
92
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The Mexico-UK Submillimetre Camera for AsTronomy (MUSCAT) is a 1.1 mm receiver consisting of 1,500 lumped-element kinetic inductance detectors (LEKIDs) for the Large Millimeter Telescope (LMT; Volcan Sierra Negra in Puebla, Mexico). MUSCAT utilises the maximum field of view of the LMTs upgraded 50-metre primary mirror and is the first Mexico-UK collaboration to deploy a millimetre/sub-mm receiver on the Large Millimeter Telescope. Using a simplistic simulator, we estimate a predicted mapping speed for MUSCAT by combining the measured performance of MUSCAT with the observed sky conditions at the LMT. We compare this to a previously calculated bolometric-model mapping speed and find that our mapping speed is in good agreement when this is scaled by a previously reported empirical factor. Through this simulation we show that signal contamination due to sky fluctuations can be effectively removed through the use of principle component analysis. We also give an overview of the instrument design and explain how this design allows for MUSCAT to be upgraded and act as an on-sky demonstration testbed for novel technologies after the facility-class TolTEC receiver comes online.
قيم البحث
اقرأ أيضاً
The Mexico-UK Submillimetre Camera for Astronomy (MUSCAT) is the second-generation large-format continuum camera operating in the 1.1 mm band to be installed on the 50-m diameter Large Millimeter Telescope (LMT) in Mexico. The focal plane of the inst
rument is made up of 1458 horn coupled lumped-element kinetic inductance detectors (LEKID) divided equally into six channels deposited on three silicon wafers. Here we present the preliminary results of the complete characterisation in the laboratory of the MUSCAT focal plane. Through the instruments readout system, we perform frequency sweeps of the array to identify the resonance frequencies, and continuous timestream acquisitions to measure and characterise the intrinsic noise and 1/f knee of the detectors. Subsequently, with a re-imaging lens and a black body point source, the beams of every detector are mapped, obtaining a mean FWHM size of $sim$3.27 mm, close to the expected 3.1 mm. Then, by varying the intensity of a beam filling black body source, we measure the responsivity and noise power spectral density (PSD) for each detector under an optical load of 300 K, obtaining the noise equivalent power (NEP), with which we verify that the majority of the detectors are photon noise limited. Finally, using a Fourier Transform Spectrometer (FTS), we measure the spectral response of the instrument, which indicate a bandwidth of 1.0--1.2 mm centred on 1.1 mm, as expected.
We report a development of a multi-color simultaneous camera for the 188cm telescope at Okayama Astrophysical Observatory in Japan. The instrument, named MuSCAT, has a capability of 3-color simultaneous imaging in optical wavelength where CCDs are se
nsitive. MuSCAT is equipped with three 1024x1024 pixel CCDs, which can be controlled independently. The three CCDs detect lights in $g_2$ (400--550 nm), $r_2$ (550--700 nm), and $z_{s,2}$ (820--920 nm) bands using Astrodon Photometrics Generation 2 Sloan filters. The field of view of MuSCAT is 6.1x6.1 arcmin$^2$ with the pixel scale of 0.358 arcsec per pixel. The principal purpose of MuSCAT is to perform high precision multi-color transit photometry. For the purpose, MuSCAT has a capability of self autoguiding which enables to fix positions of stellar images within ~1 pix. We demonstrate relative photometric precisions of 0.101%, 0.074%, and 0.076% in $g_2$, $r_2$, and $z_{s,2}$ bands, respectively, for GJ436 (magnitudes in $g$=11.81, $r$=10.08, and $z$=8.66) with 30 s exposures. The achieved precisions meet our objective, and the instrument is ready for operation.
The MUSCAT instrument is a large-format camera planned for installation on the Large Millimeter Telescope (LMT) in 2018. MUSCAT requires continuous cooling of several large-volume stages to sub-Kelvin temperatures, with the focal plane cooled to 100
mK. Through the use of continuous sorption coolers and a miniature dilution refrigerator, the MUSCAT project can fulfil its cryogenic requirements at a fraction of the cost and space required for conventional dilution systems. Our design is a helium-light system, using a total of only 9 litres of helium-3 across several continuous cooling systems, cooling from 4 K to 100 mK. Here we describe the operation of both the continuous sorption and the miniature dilution refrigerator systems used in this system, along with the overall thermal design and budgeting of MUSCAT. MUSCAT will represent the first deployment of these new technologies in a science-grade instrument and will prove the concept as a viable option for future large-scale experiments such as CMB-S4.
SOXS (Son Of X-Shooter) is a medium resolution (~4500) wide-band (0.35 - 2.0 {mu}m) spectrograph which passed the Final Design Review in 2018. The instrument is planned to be installed at the NTT in La Silla and it is mainly composed by five differen
t optomechanical subsystems (Common Path, NIR spectrograph, UV-VIS spectrograph, Camera, and Calibration) and other mechanical subsystems (Interface flange, Platform, cable corotator, and cooling). It is currently in the procurement and integration phase. In this paper we present the post-FDR modifications in the mechanical design due to the various iterations with the manufacturers and the actual procurement status. The last part describes the strategy used to keep under control the mechanical interfaces between the subsystems.
We present the design and the preliminary on sky performance with respect to beams and pass-bands of a multichroic polarimeter array covering the 90 and 146 GHz Cosmic Microwave Background (CMB) bands and its enabling broadband optical system recentl
y deployed on the Atacama Cosmology Telescope (ACT). The constituent pixels are feedhorn-coupled multichroic polarimeters fabricated at NIST. This array is coupled to the ACT telescope via a set of three silicon lenses incorporating novel broad-band metamaterial anti-reflection coatings. This receiver represents the first multichroic detector array deployed for a CMB experiment and paves the way for the extensive use of multichroic detectors and broadband optical systems in the next generation of CMB experiments.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
