اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدJWST Noise Floor I: Random Error Sources in JWST NIRCam Time Series
97
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
JWST transmission and emission spectra will provide invaluable glimpses of transiting exoplanet atmospheres, including possible biosignatures. This promising science from JWST, however, will require exquisite precision and understanding of systematic errors that can impact the time series of planets crossing in front of and behind their host stars. Here, we provide estimates of the random noise sources affecting JWST NIRCam time-series data on the integration-to-integration level. We find that 1/f noise can limit the precision of grism time series for 2 groups (230 ppm to 1000 ppm depending on the extraction method and extraction parameters), but will average down like the square root of N frames/reads. The current NIRCam grism time series mode is especially affected by 1/f noise because its GRISMR dispersion direction is parallel to the detector fast-read direction, but could be alleviated in the GRISMC direction. Care should be taken to include as many frames as possible per visit to reduce this 1/f noise source: thus, we recommend the smallest detector subarray sizes one can tolerate, 4 output channels and readout modes that minimize the number of skipped frames (RAPID or BRIGHT2). We also describe a covariance weighting scheme that can significantly lower the contributions from 1/f noise as compared to sum extraction. We evaluate the noise introduced by pre-amplifier offsets, random telegraph noise, and high dark current RC pixels and find that these are correctable below 10 ppm once background subtraction and pixel masking are performed. We explore systematic error sources in a companion paper.
قيم البحث
اقرأ أيضاً
JWST holds great promise in characterizing atmospheres of transiting exoplanets, potentially providing insights into Earth-sized planets within the habitable zones of M dwarf host stars if photon-limited performance can be achieved. Here, we discuss
the systematic error sources that are expected to be present in grism time series observations with the NIRCam instrument. We find that pointing jitter and high gain antenna moves on top of the detectors subpixel crosshatch patterns will produce relatively small variations (less than 6 parts per million, ppm). The time-dependent aperture losses due to thermal instabilities in the optics can also be kept to below 2 ppm. To achieve these low noise sources, it is important to employ a sufficiently large (more than 1.1 arcseconds) extraction aperture. Persistence due to charge trapping will have a minor (less than 3 ppm) effect on time series 20 minutes into an exposure and is expected to play a much smaller role than it does for the HST WFC3 detectors. We expect temperature fluctuations to be less than 3 ppm. In total, our estimated noise floor from known systematic error sources is only 9 ppm per visit. We do however urge caution as unknown systematic error sources could be present in flight and will only be measurable on astrophysical sources like quiescent stars. We find that reciprocity failure may introduce a perennial instrument offset at the 40 ppm level, so corrections may be needed when stitching together a multi-instrument multi-observatory spectrum over wide wavelength ranges.
The James Webb Space Telescope (JWST) offers unprecedented sensitivity, stability, and wavelength coverage for transiting exoplanet studies, opening up new avenues for measuring atmospheric abundances, structure, and temperature profiles. Taking full
advantage of JWST spectroscopy of planets from 0.6um to 28um, however, will require many observations with a combination of the NIRISS, NIRCam, NIRSpec, and MIRI instruments. In this white paper, we discuss a new NIRCam mode (not yet approved or implemented) that can reduce the number of necessary observations to cover the 1.0um to 5.0um wavelength range. Even though NIRCam was designed primarily as an imager, it also includes several grisms for phasing and aligning JWSTs 18 hexagonal mirror segments. NIRCams long-wavelength channel includes grisms that cover 2.4um to 5.0um with a resolving power of R = 1200 - 1550 using two separate configurations. The long-wavelength grisms have already been approved for science operations, including wide field and single object (time series) slitless spectroscopy. We propose a new mode that will simultaneously measure spectra for science targets in the 1.0um to 2.0um range using NIRCams short-wavelength channel. This mode, if approved, would take advantage of NIRCams Dispersed Hartmann Sensor (DHS), which produces 10 spatially separated spectra per source at R ~ 300. We discuss the added benefit of the DHS in constraining abundances in exoplanet atmospheres as well as its ability to observe the brightest systems. The DHS essentially comes for free (at no time cost) with any NIRCam long-wavelength grism observation, but the detector integration parameters have to be selected to ensure that the long-wavelength grism observations do not saturate and that JWST data volume downlink constraints are not violated.
The NIRCam instrument on the upcoming James Webb Space Telescope (JWST) will offer an unprecedented view of the most distant galaxies. In preparation for future deep NIRCam extragalactic surveys, it is crucial to understand the color selection of hig
h-redshift galaxies using the Lyman dropout technique. To that end, we have used the JAdes extraGalactic Ultradeep Artificial Realizations (JAGUAR) mock catalog to simulate a series of extragalactic surveys with realistic noise estimates. This enables us to explore different color selections and their impact on the number density of recovered high-redshift galaxies and lower-redshift interlopers. We explore how survey depth, detection signal-to-noise ratio, color selection method, detection filter choice, and the presence of the Ly$alpha$ emission line affects the resulting dropout selected samples. We find that redder selection colors reduce the number of recovered high-redshift galaxies, but the overall accuracy of the final sample is higher. In addition, we find that methods that utilize two or three color cuts have higher accuracy because of their ability to select against low-redshift quiescent and faint dusty interloper galaxies. We also explore the near-IR colors of brown dwarfs and demonstrate that, while they are predicted to have low on-sky densities, they are most likely to be recovered in F090W dropout selection, but there are color cuts which help to mitigate this contamination. Overall, our results provide NIRCam selection methods to aid in the creation of large, pure samples of ultra high-redshift galaxies from photometry alone.
The James Webb Space Telescope near-infrared camera (JWST NIRCam) has two 2.2 $times$ 2.2 fields of view that are capable of either imaging or spectroscopic observations. Either of two $R sim 1500$ grisms with orthogonal dispersion directions can be
used for slitless spectroscopy over $lambda = 2.4 - 5.0$ $mu$m in each module, and shorter wavelength observations of the same fields can be obtained simultaneously. We present the latest predicted grism sensitivities, saturation limits, resolving power, and wavelength coverage values based on component measurements, instrument tests, and end-to-end modeling. Short wavelength (0.6 -- 2.3 $mu$m) imaging observations of the 2.4 -- 5.0 $mu$m spectroscopic field can be performed in one of several different filter bands, either in-focus or defocused via weak lenses internal to NIRCam. Alternatively, the possibility of 1.0 -- 2.0 $mu$m spectroscopy (simultaneously with 2.4 -- 5.0 $mu$m) using dispersed Hartmann sensors (DHSs) is being explored. The grisms, weak lenses, and DHS elements were included in NIRCam primarily for wavefront sensing purposes, but all have significant science applications. Operational considerations including subarray sizes, and data volume limits are also discussed. Finally, we describe spectral simulation tools and illustrate potential scientific uses of the grisms by presenting simulated observations of deep extragalactic fields, galactic dark clouds, and transiting exoplanets.
Grisms are dispersive transmission optics that find their most frequent use in instruments that combine imaging and spectroscopy. This application is particularly popular in the infrared where imagers frequently have a cold pupil in their optical pat
h that is a suitable location for a dispersive element. In particular, several recent and planned space experiments make use of grisms in slit-less spectrographs capable of multi-object spectroscopy. We present an astronomer-oriented general purpose introduction to grisms and their use in current and future astronomical instruments. We present a simple, step-by-step procedure for adding a grism spectroscopy capability to an existing imager design. This procedure serves as an introduction to a discussion of the device performance requirements for grisms, focusing in particular on the problems of lithographically patterned silicon devices, the most effective grism technology for the 1.1-8 micron range. We begin by summarizing the manufacturing process of monolithic silicon gratings. We follow this with a report in detail on the as-built performance of parts constructed for a significant new space application, the NIRCam instrument on JWST and compare these measurements to the requirements.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
