اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدDetermining geopotential difference via relativistic precise point positioning time comparison: A case study using simulated observations
78
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
According to general relativity theory (GRT), the geopotential difference (GD) can be determined by comparing the change in time difference between precise clocks using the precise point positioning (PPP) time transfer technique, referred to as the relativistic PPP time comparison approach. We focused on high-precision time comparison between two precise clocks for determining the GD using the relativistic PPP time transfer,and conducted simulation experiments to validate the approach. In the experiments, we consider three cases to evaluate the performance of the approach using clocks with different stabilities, namely, the frequency stabilities of the clocks equipped at three selected ground stations are respectively (Case 1), (Case 2), and (Case 3) at time period. Conclusions are drawn from the experimental results. First, high-precision clocks can significantly improve the accuracy for PPP time transfer, but the improvement is limited by measurement noises. Compared to Case 1, the long-term stabilities of OPMT-BRUX as well as PTBB-BRUX are improved in Cases 2 and 3. The frequency stabilities of Cases 1-3 are approximately 4.28*10-16, 4.00*10-17, and 3.22*10-17 at 10-day averaging time for OPMT-BRUX, respectively, and for PTBB-BRUX, these values are approximately 3.73*10-16, 8.17*10-17, and 4.64*10-17. Second, the geopotential difference between any two stations can be determined at the decimeter level, with its accuracy being consistent with the stabilities of the time links in Cases 1-3. In Case 3, the determined geopotential differences between OPMT and BRUX deviate from the EIGEN-6C4 model values by -0.64 m2/s2 with an uncertainty of 1.11 m2/s2, whereas the deviation error between PTBB and BRUX is 0.76 m2/s2 with an uncertainty of 1.79 m2/s2. The approach proposed in this study can be also applied to testing GRT.
قيم البحث
اقرأ أيضاً
Recent technological advances in optical atomic clocks are opening new perspectives for the direct determination of geopotential differences between any two points at a centimeter-level accuracy in geoid height. However, so far detailed quantitative
estimates of the possible improvement in geoid determination when adding such clock measurements to existing data are lacking. We present a first step in that direction with the aim and hope of triggering further work and efforts in this emerging field of chronometric geodesy and geophysics. We specifically focus on evaluating the contribution of this new kind of direct measurements in determining the geopotential at high spatial resolution (~ 10 km). We studied two test areas, both located in France and corresponding to a middle (Massif Central) and high (Alps) mountainous terrain. These regions are interesting because the gravitational field strength varies greatly from place to place at high spatial resolution due to the complex topography. Our method consists in first generating a synthetic high resolution geopotential map, then drawing synthetic measurement data (gravimetry and clock data) from it, and finally reconstructing the geopotential map from that data using least squares collocation. The quality of the reconstructed map is then assessed by comparing it to the original one used to generate the data. We show that adding only a few clock data points (less than 1 % of the gravimetry data) reduces the bias significantly and improves the standard deviation by a factor 3. The effect of the data coverage and data quality on the results is investigated, and the trade-off between the measurement noise level and the number of data points is discussed.
A number of approaches have been proposed to identify service boundaries when decomposing a monolith to microservices. However, only a few use systematic methods and have been demonstrated with replicable empirical studies. We describe a systematic
approach for refactoring systems to microservice architectures that uses static analysis to determine the systems structure and dynamic analysis to understand its actual behavior. A prototype of a tool was built using this approach (MonoBreaker) and was used to conduct a case study on a real-world software project. The goal was to assess the feasibility and benefits of a systematic approach to decomposition that combines static and dynamic analysis. The three study participants regarded as positive the decomposition proposed by our tool, and considered that it showed improvements over approaches that rely only on static analysis.
Starting from the description of space-time as a curved four-dimensional manifold, null Gaussian coordinates systems as appropriate for relativistic positioning will be discussed. Different approaches and strategies will be reviewed, implementing the
null coordinates with both continuous and pulsating electromagnetic signals. In particular, methods based on purely local measurements of proper time intervals between pulses will be expounded and the various possible sources of uncertainty will be analyzed. As sources of pulses both artificial and natural emitters will be considered. The latter will concentrate on either radio- or X ray-emitting pulsars, discussing advantages and drawbacks. As for artificial emitters, various solutions will be presented, from satellites orbiting the Earth to broadcasting devices carried both by spacecrafts and celestial bodies of the solar system. In general the accuracy of the positioning is expected to be limited, besides the instabilities and drift of the sources, by the precision of the local clock, but in any case in long journeys systematic cumulated errors will tend to become dominant. The problem can be kept under control properly using a high level of redundancy in the procedure for the calculation of the coordinates of the receiver and by mixing a number of different and complementary strategies. Finally various possibilities for doing fundamental physics experiments by means of space-time topography techniques will shortly be presented and discussed.
The procedure by means of which the occurrence time of an impending mainshock can be identified by analyzing in natural time the seismicity in the candidate area subsequent to the recording of a precursory Seismic Electric Signals (SES) activity is r
eviewed. Here, we report the application of this procedure to an Mw5.4 mainshock that occurred in Greece on 17 November 2014 and was strongly felt in Athens. This mainshock (which is pretty rare since it is the strongest in that area for more than half a century) was preceded by an SES activity recorded on 27 July 2014 and the results of the natural time analysis reveal that the system approached the critical point (mainshock occurrence) early in the morning on 15 November 2014. SES activities that have been recently recorded are also presented. Furthermore, in a Note we discuss the case of the Mw5.3 earthquake that was also strongly felt in Athens on 19 July 2019 (Parnitha fault).
Multi-point detection of the full-scale environment is an important issue in autonomous driving. The state-of-the-art positioning technologies (such as RADAR and LIDAR) are incapable of real-time detection without line-of-sight. To address this issue
, this paper presents a novel multi-point vehicular positioning technology via emph{millimeter-wave} (mmWave) transmission that exploits multi-path reflection from a emph{target vehicle} (TV) to a emph{sensing vehicle} (SV), which enables the SV to fast capture both the shape and location information of the TV in emph{non-line-of-sight} (NLoS) under the assistance of multi-path reflections. A emph{phase-difference-of-arrival} (PDoA) based hyperbolic positioning algorithm is designed to achieve the synchronization between the TV and SV. The emph{stepped-frequency-continuous-wave} (SFCW) is utilized as signals for multi-point detection of the TVs. Transceiver separation enables our approach to work in NLoS conditions and achieve much lower latency compared with conventional positioning techniques.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
