اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدNew CAP Reduction Mechanisms for IEEE 802.15.4 DSME to Support Fluctuating Traffic in IoT Systems
54
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
In 2015, the IEEE 802.15.4 standard was expanded by the Deterministic and Synchronous Multi-Channel Extension (DSME) to increase reliability, scalability and energy-efficiency in industrial applications. The extension offers a TDMA/FDMA-based channel access, where time is divided into two alternating phases, a contention access period (CAP) and a contention free period (CFP). During the CAP, transmission slots can be allocated offering an exclusive access to the shared medium during the CFP. The fraction $tau$ of CFPs time slots in a dataframe is a critical value, because it directly influences agility and throughput. A high throughput demands that the CFP is much longer than the CAP, i.e., a high value of the fraction $tau$, because application data is only sent during the CFP. High agility is given if the expected waiting time to send a CAP message is short and that the length of the CAPs are sufficiently long to accommodate necessary (de)allocations of GTSs, i.e., a low value of the fraction $tau$. Once DSME is configured according to the needs of an application, the fraction $tau$ can only assume one of two values and cannot be changed at run-time. In this paper, we propose two extensions of DSME that allow to adopt $tau$ to the current traffic pattern. We show theoretically and through simulations that the proposed extensions provide a high degree of responsiveness to traffic fluctuations while keeping the throughput high.
قيم البحث
اقرأ أيضاً
For data collection scenarios in the Industrial Internet of Things, wireless communication provides a cost-effective and easy-to-deploy alternative to wired networks. The main focus lies on energy efficiency and reliability, as many devices are batte
ry operated. IEEE 802.15.4 DSME enhances reliability by acknowledging each packet individually, imposing an overhead for each transmitted packet, and increasing energy consumption. In networks with little interference, it may be beneficial to aggregate the acknowledgments for multiple nodes and broadcast them in a compressed format to all nodes in the neighborhood. The IEEE 802.15.4 2012 standard describes such a group acknowledgment scheme which, however, disappears in later iterations of the standard. This paper compares different group acknowledgment schemes and proposes a novel group acknowledgment scheme with the goal to examine whether group acknowledgments constitute a viable alternative to regular acknowledgments in reliable data-collection scenarios. Our analysis suggests that apart from a few cases, GACKs do not constitute a valid alternative to the direct acknowledgement of data packets.
IEEE 802.15.4 supports a Guaranteed Time Slot (GTS) allocation mechanism for time-critical and delay-sensitive data transmissions in Wireless Personal Area Networks (WPANs). However, the inflexible first-come-first-served GTS allocation policy and th
e passive deallocation mechanism significantly reduce network efficiency. In this paper, we propose an Adaptive and Real-Time GTS Allocation Scheme (ART-GAS) to provide differentiated services for devices with different priorities, which guarantees data transmissions for time-sensitive and high-traffic devices. The bandwidth utilization in IEEE 802.15.4-based PAN is improved. Simulation results show that our ART-GAS algorithm significantly outperforms the existing GTS mechanism specified in IEEE 802.15.4.
The rapid deployment of Internet of Things (IoT) applications leads to massive data that need to be processed. These IoT applications have specific communication requirements on latency and bandwidth, and present new features on their generated data
such as time-dependency. Therefore, it is desirable to reshape the current IoT architectures by exploring their inherent nature of communication and computing to support smart IoT data process and analysis. We introduce in this paper features of IoT data, trends of IoT network architectures, some problems in IoT data analysis, and their solutions. Specifically, we view that software-defined edge computing is a promising architecture to support the unique needs of IoT data analysis. We further present an experiment on data anomaly detection in this architecture, and the comparison between two architectures for ECG diagnosis. Results show that our method is effective and feasible.
The adoption of Internet of Things (IoT) technologies is increasing and thus IoT is seemingly shifting from hype to reality. However, the actual use of IoT over significant timescales has not been empirically analyzed. In other words the reality rema
ins unexplored. Furthermore, despite the variety of IoT verticals, the use of IoT across vertical industries has not been compared. This paper uses a two-year IoT dataset from a major Finnish mobile network operator to investigate different aspects of cellular IoT traffic including temporal evolution and the use of IoT devices across industries. We present a variety of novel findings. For example, our results show that IoT traffic volume per device increased three-fold over the last two years. Additionally, we illustrate diversity in IoT usage among different industries with orders of magnitude differences in traffic volume and device mobility. Though we also note that the daily traffic patterns of all devices can be clustered into only three patterns, differing mainly in the presence and timing of a peak hour. Finally, we illustrate that the share of LTE-enabled IoT devices has remained low at around 2% and 30% of IoT devices are still 2G only.
The recent spate of cyber attacks towards Internet of Things (IoT) devices in smart homes calls for effective techniques to understand, characterize, and unveil IoT device activities. In this paper, we present a new system, named IoTAthena, to unveil
IoT device activities from raw network traffic consisting of timestamped IP packets. IoTAthena characterizes each IoT device activity using an activity signature consisting of an ordered sequence of IP packets with inter-packet time intervals. IoTAthena has two novel polynomial time algorithms, sigMatch and actExtract. For any given signature, sigMatch can capture all matches of the signature in the raw network traffic. Using sigMatch as a subfunction, actExtract can accurately unveil the sequence of various IoT device activities from the raw network traffic. Using the network traffic of heterogeneous IoT devices collected at the router of a real-world smart home testbed and a public IoT dataset, we demonstrate that IoTAthena is able to characterize and generate activity signatures of IoT device activities and accurately unveil the sequence of IoT device activities from raw network traffic.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
