اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدThe three-dimensional statistical characterization of plain grinding surfaces
77
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
In tribology, it is of importance to properly characterize the topography of rough surfaces. In this work, the three-dimensional topographies of plain grinding surfaces are measured through a white light interferometer, and their geometrical statistical features are analyzed. It is noticed that only when the total measured area is larger than a threshold value, is the statistical characterization reasonable and stable, which should be kept in mind in actual measurements. For various plain grinding surfaces, the height of asperity-summit obeys a Gaussian distribution, and the equivalent curvature radius follows a modified F-distribution. These statistical characteristics are helpful to analyze the contact and friction behaviors of rough surfaces.
قيم البحث
اقرأ أيضاً
The scalable and high-efficiency production of two-dimensional (2D) materials is a prerequisite to their commercial use. Currently, only graphene and graphene oxide can be produced on a ton scale, and the inability to produce other 2D materials on su
ch a large scale hinders their technological applications. Here we report a grinding exfoliation method that uses micro-particles as force intermediates to resolve applied compressive forces into a multitude of small shear forces, inducing the highly-efficient exfoliation of layer materials. The method, referred to as intermediate-assisted grinding exfoliation (iMAGE), can be used for the large-scale production of many 2D materials. As an example, we have exfoliated bulk h-BN into 2D h-BN with large flake sizes, high quality and structural integrity, with a high exfoliation yield of 67%, a high production rate of 0.3 g h-1 and a low energy consumption of 3.01x10^6 J g-1. The production rate and energy consumption are one to two orders of magnitude better than previous results. Besides h-BN, this iMAGE technology has been used to exfoliate various layer materials such as graphite, black phosphorus, transition metal dichalcogenides, and metal oxides, proving its universality. Molybdenite concentrate, a natural low-cost and abundant mineral, was used as a demo for the large-scale exfoliation production of 2D MoS2 flakes. Our work indicates the huge potential of the iMAGE method to produce large amounts of various 2D materials, which paves the way for their commercial application.
Two-dimensional (2D) materials have many promising applications, but their scalable production remains challenging. Herein, we develop a glue-assisted grinding exfoliation (GAGE) method in which the adhesive polymer acts as a glue to massively produc
e 2D materials with large lateral sizes, high quality, and high yield. Density functional theory simulation shows that the exfoliation mechanism involves the competition between the binding energy of selected polymers and the 2D materials which is larger than the exfoliation energy of the layered materials. Taking h-BN as an example, the GAGE produces 2D h-BN with an average lateral size of 2.18 {mu}m and thickness of 3.91 nm. The method is also extended to produce various other 2D materials, including graphene, MoS2, Bi2O2Se, vermiculite, and montmorillonite. Two representative applications of thus-produced 2D materials have been demonstrated, including h-BN/polymer composites for insulating thermal conduction and MoS2 electrocatalysts for large-current-density hydrogen evolution, indicating the great potential of massively produced 2D materials.
Electron tomography (ET) has been demonstrated to be a powerful tool in addressing challenging problems, such as understanding 3D interactions among various microstructures. Advancing ET to broader applications requires novel instrumentation design t
o break the bottlenecks both in theory and in practice. In this work, we built a compact four-degree-of-freedom (three-directional positionings plus self-rotation) nano-manipulator dedicated to ET applications, which is called X-Nano transmission electron microscope (TEM) holder. All the movements of the four degrees of freedom are precisely driven by built-in piezoelectric actuators, minimizing the artefacts due to the vibration and drifting of the TEM stage. Full 360o rotation is realized with an accuracy of 0.05o in the whole range, which solves the missing wedge problem. Meanwhile, the specimen can move to the rotation axis with an integrated 3D nano-manipulator, greatly reducing the effort in tracking sample locations during tilting. Meanwhile, in-situ stimulation function can be seamlessly integrated into the X-Nano TEM holder so that dynamic information can be uncovered. We expect that more delicate researches, such as those about 3D microstructural evolution, can be carried out extensively by means of this holder in the near future.
Flexible microfluidics have found extensive utility in the biological and biomedical fields. A leading substrate material for compliant devices is polydimethylsiloxane (PDMS). Despite its many advantages, PDMS is inherently hydrophobic and consequent
ly its use in passive (pumpless) microfluidics becomes problematic. To this end, many physical and chemical modifications have been introduced to render PDMS hydrophilic, ranging from amphiphilic molecule additions to surface plasma treatments. However, when transitioning from lab benchtop to realized medical devices, these modifications must exhibit long-term stability. Unfortunately, these modifications are often presented but their mechanisms and long-term stability are not studied in detail. We have investigated an array of PDMS modifications, utilizing contact angle goniometry to study surface energy over a 30-day evolution study. Samples were stored in air and water, and Fourier Transform Infrared-Attenuated Total Reflectance (FTIR-ATR) analysis was used to confirm surface functional group uniformity. We have identified preferred modification techniques for long-lasting PDMS devices and characterized often overlooked material stability.
Three-dimensional (3D) topological insulators (TIs) are candidate materials for various electronic and spintronic devices due to their strong spin-orbit coupling and unique surface electronic structure. Rapid, low-cost preparation of large-area TI th
in films compatible with conventional semiconductor technology is key to the practical applications of TIs. Here, we show that wafer-sized Bi2Te3 family TI and magnetic TI films with decent quality and well-controlled composition and properties can be prepared on amorphous SiO2/Si substrates by magnetron cosputtering. The SiO2/Si substrates enable us to electrically tune (Bi1-xSbx)2Te3 and Cr-doped (Bi1-xSbx)2Te3 TI films between p-type and n-type behavior and thus study the phenomena associated with topological surface states, such as the quantum anomalous Hall effect (QAHE). This work significantly facilitates the fabrication of TI-based devices for electronic and spintronic applications.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
