اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدHydrogen storage properties of Mn and Cu for Fe substitution in TiFe0.9 intermetallic compound
181
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The present study investigates the partial substitutions of Mn and Cu for Fe in the TiFe-system to gain better understanding of the role of elemental substitution on its hydrogen storage properties. The TiFe0.88-xMn0.02Cux (x = 0, 0.02, 0.04) compositions were studied. From X-Ray Diffraction (XRD) and Electron Probe Micro-Analysis (EPMA), it was found that all alloys are multi-phase, with TiFe as a major phase, together with b{eta}-Ti and Ti4Fe2O-type as secondary precipitates, of all them containing also Mn and Cu. Increasing the Cu content augments the secondary phase amounts. Low quantity of secondary phases helps the activation of the main TiFe phase for the first hydrogen absorption, but on increasing their amounts, harsher activation occurs. Both Mn and Cu substitutions increase the cell parameter of TiFe, thus decreasing the first plateau pressure. However, Cu substitution rises the second plateau pressure revealing the predominancy of electronic effects associated to this substitution. All samples have fast kinetics and high hydrogen capacity making these substituted compounds promising for large scale stationary applications.
قيم البحث
اقرأ أيضاً
TiFe intermetallic compound has been extensively studied, owing to its low cost, good volumetric hydrogen density, and easy tailoring of hydrogenation thermodynamics by elemental substitution. All these positive aspects make this material promising f
or large-scale applications of solid-state hydrogen storage. On the other hand, activation and kinetic issues should be amended and the role of elemental substitution should be further understood. This work investigates the thermodynamic changes induced by the variation of Ti content along the homogeneity range of the TiFe phase (Ti:Fe ratio from 1:1 to 1:0.9) and of the substitution of Mn for Fe between 0 and 5 at.%. In all considered alloys, the major phase is TiFe-type together with minor amounts of TiFe2 or b{eta}-Ti-type and Ti4Fe2O-type at the Ti-poor and rich side of the TiFe phase domain, respectively. Thermodynamic data agree with the available literature but offer here a comprehensive picture of hydrogenation properties over an extended Ti and Mn compositional range. Moreover, it is demonstrated that Ti-rich alloys display enhanced storage capacities, as long as a limited amount of b{eta}-Ti is formed. Both Mn and Ti substitutions increase the cell parameter by possibly substituting Fe, lowering the plateau pressures and decreasing the hysteresis of the isotherms. A full picture of the dependence of hydrogen storage properties as a function of the composition will be discussed, together with some observed correlations.
In this work we report the physical properties of the new intermetallic compound TbRhIn5 investigated by means of temperature dependent magnetic susceptibility, electrical resistivity, heat-capacity and resonant x-ray magnetic diffraction experiments
. TbRhIn5 is an intermetallic compound that orders antiferromagnetically at TN = 45.5 K, the highest ordering temperature among the existing RRhIn5 (1-1-5, R = rare earth) materials. This result is in contrast to what is expected from a de Gennes scaling along the RRhIn5 series. The X-ray resonant diffraction data below TN reveal a commensurate antiferromagnetic (AFM) structure with a propagation vector (1/2 0 1/2) and the Tb moments oriented along the c-axis. Strong (over two order of magnitude) dipolar enhancements of the magnetic Bragg peaks were observed at both Tb absorption edges LII and LIII, indicating a fairly high polarization of the Tb 5d levels. Using a mean field model including an isotropic first-neighbors exchange interaction J(R-R) and the tetragonal crystalline electrical field (CEF), we were able to fit our experimental data and to explain the direction of the ordered Tb-moments and the enhanced TN of this compound. The evolution of the magnetic properties along the RRhIn5 series and its relation to CEF effects for a given rare-earth is discussed.
In this work, we combined magnetization, pressure dependent electrical resistivity, heat-capacity, 63Cu Nuclear Magnetic Resonance (NMR) and X-ray resonant magnetic scattering experiments to investigate the physical properties of the intermetallic Ce
CuBi2 compound. Our single crystals show an antiferromagnetic ordering at TN ~ 16 K and the magnetic properties indicate that this compound is an Ising antiferromagnet. In particular, the low temperature magnetization data revealed a spin-flop transition at T = 5 K when magnetic fields about 5.5 T are applied along the c-axis. Moreover, the X-ray magnetic diffraction data below TN revealed a commensurate antiferromagnetic structure with propagation wavevector (0 0 1/2) with the Ce^3+ moments oriented along the c-axis. Furthermore, our heat capacity, pressure dependent resistivity and temperature dependent 63Cu NMR data suggest that CeCuBi2 exhibits a weak heavy fermion behavior with strongly localized Ce^3+ 4f electrons. We thus discuss a scenario taking into account the anisotropic magnetic interaction between the Ce^3+ ions along with the tetragonal crystalline electric field effects in CeCuBi2.
Proposed as blanket structural materials for fusion power reactors, reduced activation ferritic/martensitic (RAFM) steel undergoes volume expanding and contracting in a cyclic mode under service environment. Particularly, being subjected to significa
nt fluxes of fusion neutrons RAFM steel suffers considerable local volume variations in the radiation damage involved regions. It is necessary to study the structure properties of the alloying elements in contraction and expansion states. In this paper we studied local substitution structures of thirteen alloying elements Al, Co, Cr, Cu, Mn, Mo, Nb, Ni, Si, Ta, Ti, V, and W in bcc Fe and calculated their substitutional energies in the volume variation range from -1.0% to 1.0%. From the structure relaxation results of the first five neighbor shells around the substitutional atom we find the relaxation in each neighbor shell keeps approximately uniform within the volume variation from -1.0% to 1.0% except those of Mn and the relaxation of the fifth neighbor shell is stronger than that of the third and forth, indicating that the lattice distortion due to the substitution atom is easier to spread in <111> direction than in other direction. The relaxation pattern and intensity are related to the size and electron structure of the substitutional atom. For some alloying elements, such as Mo, Nb, Ni, Ta, Ti and W, the substitutional energy decreases noticeably when the volume increases. Further analysis show that the substitutional energy comprises the energy variation originated from local structure relaxation and the chemical potential difference of the substitutional atom between its elemental crystalline state and the solid solution phase in bcc Fe. We think the approximately uniform relaxation of each neighbor shell around a substitutional atom give rise to a linear decrease in the substitutional energy with the increasing volume.
We investigated structural, magnetic and electrical properties of sputter deposited Mn-Fe-Ga compounds. The crystallinity of the Mn-Fe-Ga thin films was confirmed using x-ray diffraction. X-ray reflection and atomic force microscopy measurements were
utilized to investigate the surface properties, roughness, thickness and density of the deposited Mn-Fe-Ga. Depending on the stoichiometry, as well as the used substrates (SrTiO3 (001) and MgO (001)) or buffer layer (TiN) the Mn-Fe-Ga crystallizes in the cubic or the tetragonally distorted phase. Anomalous Hall effect and alternating gradient magnetometry measurements confirmed strong perpendicular magnetocrystalline anisotropy. Low saturation magnetization and hard magnetic behavior was reached by tuning the composition. Temperature dependent anomalous Hall effect measurements in a closed cycle He-cryostat showed a slight increase in coercivity with decreasing temperature (300K to 2K). TiN buffered Mn2.7Fe0.3Ga revealed sharper switching of the magnetization compared to the unbuffered layers.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
