اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدUsing the Stokes V widths of Fe I lines for diagnostics of the intrinsic solar photospheric magnetic field
70
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The goal of this study is to explore a novel method for the solar photospheric magnetic field diagnostics using Stokes V widths of different magnetosensitive Fe~I spectral lines. We calculate Stokes I and V profiles of several Fe I lines based on a one-dimensional photospheric model VAL C using the NICOLE radiative transfer code. These profiles are used to produce calibration curves linking the intrinsic magnetic field values with the widths of blue peaks of Stokes V profiles. The obtained calibration curves are then tested using the Stokes profiles calculated for more realistic photospheric models based on MHD models of magneto-convection. It is shown that the developed Stokes V widths (SVW) method can be used with various optical and near-infrared lines. Out of six lines considered in this study, FeI 6301 line appears to be the most effective: it is sensitive to fields over ~200G and does not show any saturation up to ~2kG. Other lines considered can also be used for the photospheric field diagnostics with this method, however, only in narrower field value ranges, typically from about 100G to 700-1000G. The developed method can be a useful alternative to the classical magnetic line ratio method, particularly when the choice of lines is limited.
قيم البحث
اقرأ أيضاً
Early magnetographic observations indicated that magnetic field in the solar photosphere has unresolved small-scale structure. Near-infrared and optical data with extremely high spatial resolution show that these structures have scales of few tens of
kilometres, which are not resolved in the majority of solar observations. The goal of this study is to establish the effect of unresolved photospheric magnetic field structure on Stokes profiles observed with relatively low spatial resolution. Ultimately, we aim to develop methods for fast estimation of the photospheric magnetic filling factor and line-of-sight gradient of the photospheric magnetic field, which can be applied to large observational data sets. We exploit 3D MHD models of magneto-convection developed using MURAM code. Corresponding profiles of Fe I 6301.5 and 6302.5 $mathrm{AA}$ spectral lines are calculated using NICOLE radiative transfer code. The resulting I and V Stokes [x,y,$lambda$] cubes with reduced spatial resolution of 150 km are used to calculate magnetic field values as they would be obtained in observations with Hinode/SOT or SDO/HMI. Three different methods of the magnetic filling factor estimation are considered: the magnetic line ratio method, Stokes V width method and a simple statistical method. We find that the statistical method and the Stokes V width method are sufficiently reliable for fast filling factor estimations. Furthermore, we find that Stokes $Ipm V$ bisector splitting gradient can be used for fast estimation of line-of-sight gradient of the photospheric magnetic field.
The Mg I 12.32 and 12.22 $mu$m lines are a pair of emission lines that present a great advantage for accurate solar magnetic field measurement. They potentially contribute to the diagnosis of solar atmospheric parameters through their high magnetic s
ensitivity. The goal of this study is to understand the radiation transfer process of these lines in detail and explore the ability of magnetic field diagnosis in the infrared. We calculated the Stokes profiles and response functions of the two Mg I 12 $mu$m lines based on one-dimensional solar atmospheric models using the Rybicki-Hummer (RH) radiative transfer code. The integration of these profiles with respect to the wavelength was used to generate calibration curves related to the longitudinal and transverse fields. The traditional single-wavelength calibration curve based on the weak-field approximation was also tested to determine if it is suitable for the infrared. The 12.32 $mu$m line is more suitable for a magnetic field diagnosis because its relative emission intensity and polarization signal are stronger than that of the 12.22 $mu$m line. The result from the response functions illustrates that the derived magnetic field and velocity with 12.32 $mu$m line mainly originate from the height of 450 km, while that for the temperature is about 490 km. The calibration curves obtained by the wavelength-integrated method show a nonlinear distribution. For the Mg I 12.32 $mu$m line, the longitudinal (transverse) field can be effectively inferred from Stokes V/I (Q/I and U/I) in the linear range below $sim 600$ G ($sim 3000$ G) in quiet regions and below $sim 400$ G ($sim 1200$ G) in penumbrae. Within the given linear range, the method is a supplement to the magnetic field calibration when the Zeeman components are incompletely split.
Understanding the characteristics of the solar magnetic field is essential for interpreting solar activities and dynamo. In this research, we investigated the asymmetric distribution of the solar photospheric magnetic field values, using synoptic cha
rts constructed from space-borne high-resolution magnetograms. It is demonstrated that the Lorentzian function describes the distribution of magnetic field values in the synoptic charts much better than the Gaussian function, and this should reflect the gradual decay process from strong to weak magnetic fields. The asymmetry values are calculated under several circumstances, and the results generally show two periodicities related to the variation of the solar B$_0$ angle and the solar cycle, respectively. We argue that it is the small-scale magnetic fields, the inclination of the solar axis, the emergence and evolution of magnetic flux, and the polar fields that are responsible for the features of asymmetry values. We further determined the polar field reversal time of solar cycles 23 and 24 with the flip of asymmetry values. Specifically, for cycle 24, we assert that the polar polarities of both hemispheres reversed at the same time - in March 2014; as to cycle 23, the reversal time of the S-hemisphere is March 2001, while the determination of the N-hemisphere is hampered by missing data.
By use of the high-resolution spectral data and the broadband imaging obtained with the Goode Solar Telescope at the Big Bear Solar Observatory on 2013 June 6, the spectra of three typical photospheric bright points (PBPs) have been analyzed. Based o
n the H$alpha$ and Ca II 8542 AA line profiles, as well as the TiO continuum emission, for the first time, the non-LTE semi-empirical atmospheric models for the PBPs are computed. The attractive characteristic is the temperature enhancement in the lower photosphere. The temperature enhancement is about 200 -- 500 K at the same column mass density as in the atmospheric model of the quiet-Sun. The total excess radiative energy of a typical PBP is estimated to be 1$times$10$^{27}$ - 2$times$10$^{27}$ ergs, which can be regarded as the lower limit energy of the PBPs. The radiation flux in the visible continuum for the PBPs is about 5.5$times$10$^{10}$ ergs cm$^{-2}$ s$^{-1}$. Our result also indicates that the temperature in the atmosphere above PBPs is close to that of a plage. It gives a clear evidence that PBPs may contribute significantly to the heating of the plage atmosphere. Using our semi-empirical atmospheric models, we estimate self-consistently the average magnetic flux density $B$ in the PBPs. It is shown that the maximum value is about one kilo-Gauss, and it decreases towards both higher and lower layers, reminding us of the structure of a flux tube between photospheric granules.
The topic of magnetic field diagnostics with the Zeeman effect is currently vividly discussed. There are some testable inversion codes available to the spectropolarimetry community and their application allowed for a better understanding of the magne
tism of the solar atmosphere. In this context, we propose an inversion technique associated with a new numerical code. The inversion procedure is promising and particularly successful for interpreting the Stokes profiles in quick and sufficiently precise way. In our inversion, we fit a part of each Stokes profile around a target wavelength, and then determine the magnetic field as a function of the wavelength which is equivalent to get the magnetic field as a function of the height of line formation. To test the performance of the new numerical code, we employed hare and hound approach by comparing an exact solution (called input) with the solution obtained by the code (called output). The precision of the code is also checked by comparing our results to the ones obtained with the HAO MERLIN code. The inversion code has been applied to synthetic Stokes profiles of the Na D$_{1}$ line available in the literature. We investigated the limitations in recovering the input field in case of noisy data. As an application, we applied our inversion code to the polarization profiles of the Fe {sc i} $lambda$ 6302.5 AA observed at IRSOL in Locarno.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
