اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدUltimate Photo-Thermo-Acoustic Efficiency of Graphene Aerogels
83
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The ability to generate, amplify, mix, and modulate sound with no harmonic distortion in a passive opto-acoustic device would revolutionize the field of acoustics. The photo-thermo-acoustic (PTA) effect allows to transduce light into sound without any bulk electro-mechanically moving parts and electrical connections, as for conventional loudspeakers. Also, PTA devices can be integrated with standard silicon complementary metal-oxide semiconductor (CMOS) fabrication techniques. Here, we demonstrate that the ultimate PTA efficiency of graphene aerogels, depending on their particular thermal and optical properties, can be experimentally achieved by reducing their mass density. Furthermore, we illustrate that the aerogels behave as an omnidirectional point-source throughout the audible range with no harmonic distortion. This research represents a breakthrough for audio-visual consumer technologies and it could pave the way to novel opto-acoustic sensing devices.
قيم البحث
اقرأ أيضاً
We present a new approach to femtosecond direct laser writing lithography to pattern nanocavities in ferromagnetic thin films. To demonstrate the concept we irradiated 300~nm thin nickel films by single intense femtosecond laser pulses through the gl
ass substrate and created complex surface landscapes at the nickel-air interface. Using a fluence above the ablation threshold the process is destructive and irradiation leads to the formation of 200~nm thin flakes of nickel around the ablation crater as seen by electron microscopy. By progressively lowering the peak laser fluence, slightly below the ablation threshold the formation of closed spallation cavities is demonstrated by interferometric microscopy. Systematic studies by electron and optical interferometric microscopies enabled us to gain an understanding of the thermo-mechanical mechanism leading to spallation at the solid-molten interface, a conclusion supported by molecular dynamics simulations. We achieved a control of the spallation process that enabled the fabrication of closed spallation nanocavities and their periodic arrangements. Due to their topology closed magnetic nanocavities can support unique couplings of multiple excitations (magnetic, optical, acoustic, spintronic). Thereby, they offer a unique physics playground, before unavailable, for magnetism, magneto-photonic and magneto-acoustic applications.
Photo-Induced Enhanced Raman Spectroscopy (PIERS) is a new surface enhanced Raman spectroscopy (SERS) modality with an order-of-magnitude Raman signal enhancement of adsorbed analytes over that of typical SERS substrates. Despite the impressive PIERS
enhancement factors and explosion in recent demonstrations of its utility, the detailed enhancement mechanism remains undetermined. Using a range of optical and X-ray spectroscopies, supported by density functional theory calculations, we elucidate the chemical and atomic-scale mechanism behind the PIERS enhancement. Stable PIERS substrates with enhancement factors of 10^6 were fabricated using self-organized hexagonal arrays of TiO2 nanotubes that were defect-engineered via annealing in inert atmospheres, and silver nanoparticles were deposited by magnetron sputtering and subsequent thermal dewetting. We identified the key source of the enhancement of PIERS vs. SERS in these structures as an increase in the Raman polarizability of the adsorbed probe molecule upon photo-induced charge transfer. A balance between crystallinity, which enhances charge transfer due to higher electron mobility in anatase-rutile heterostructures but decreases visible light absorption, and oxygen vacancy defects, which increase visible light absorption and photo-induced electron transfers, was critical to achieve high PIERS enhancements.
We measure the phase velocities of surface acoustic waves (SAWs) propagating at different crystal orientations on (001)-cut GaAs substrates and their temperature dependance. We design and fabricate sets of interdigital transducers (IDTs) to induce 4
{mu}m SAWs via the inverse piezoelectric (PZE) effect between the PZE [110] direction (set as {theta} = 0{deg}) and the non-PZE [100] direction ({theta} = 45{deg}) on GaAs. We also prepare ZnO film sputtered GaAs substrates in order to launch SAWs efficiently by IDTs even in the non-PZE direction. We quantify acoustic velocities between 1.4 and 300 K from the resonant frequencies in the S11 parameter using a network analyzer. We observe parabolic velocity-temperature trends at all {theta}-values both on GaAs and ZnO/GaAs substrates. Below 200 K, in ZnO/GaAs substrates slower SAW modes appear around the [110] direction, which are unseen at RT.
We describe strategies to estimate the upper limits of the efficiency of photon energy harvesting via hot electron extraction from gapless absorbers. Gapless materials such as noble metals can be used for harvesting the whole solar spectrum, includin
g visible and near-infrared light. The energy of photo-generated non-equilibrium or hot charge carriers can be harvested before they thermalize with the crystal lattice via the process of their internal photo-emission (IPE) through the rectifying Schottky junction with a semiconductor. However, the low efficiency and the high cost of noble metals necessitates the search for cheaper abundant alternative materials, and we show here that carbon can serve as a promising IPE material candidate. We compare the upper limits of performance of IPE photon energy-harvesting platforms, which incorporate either gold or carbon as the photoactive material where hot electrons are generated. Through a combination of density functional theory, joint electron density of states calculations, and Schottky diode efficiency modeling, we show that the material electron band structure imposes a strict upper limit on the achievable efficiency of the IPE devices. Our calculations reveal that graphite is a good material candidate for the IPE absorber for harvesting visible and near-infrared photons. Graphite electron density of states yields a sizeable population of hot electrons with energies high enough to be collected across the potential barrier. We also discuss the mechanisms that prevent the IPE device efficiency from reaching the upper limits imposed by their material electron band structures. The proposed approach is general and allows for efficient pre-screening of materials for their potential use in IPE energy converters and photodetectors within application-specific spectral windows.
Core-shell nanowire heterostructures form the basis for many innovative devices. When compound nanowire shells are grown by directional deposition techniques, the azimuthal position of the sources for the different constituents in the growth reactor,
substrate rotation, and nanowire self-shadowing inevitably lead to sequential deposition. Here, we uncover for In$_{0.15}$Ga$_{0.85}$As/GaAs shell quantum wells grown by molecular beam epitaxy a drastic impact of this sequentiality on the luminescence efficiency. The photoluminescence intensity of shell quantum wells grown with a flux sequence corresponding to migration enhanced epitaxy, i. e. when As and the group-III metals essentially do not impinge at the same time, is more than two orders of magnitude higher than for shell quantum wells prepared with substantially overlapping fluxes. Transmission electron microscopy does not reveal any extended defects explaining this difference. Our analysis of photoluminescence transients shows that co-deposition has two detrimental microscopic effects. First, a higher density of electrically active point defects leads to internal electric fields reducing the electron-hole wave function overlap. Second, more point defects form that act as nonradiative recombination centers. Our study demonstrates that the source arrangement of the growth reactor, which is of mere technical relevance for planar structures, can have drastic consequences for the materials properties of nanowire shells. We expect that this finding holds also for other alloy nanowire shells.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
