اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدHigh-Speed Phase-Only Spatial Light Modulators with Two-Dimensional Tunable Microcavity Arrays
76
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Spatial light modulators (SLMs) are central to numerous applications ranging from high-speed displays to adaptive optics, structured illumination microscopy, and holography. After decades of advances, SLM arrays based on liquid crystals can now reach large pixel counts exceeding 10^6 with phase-only modulation with a pixel pitch of less than 10 {mu}m and reflectance around 75%. However, the rather slow modulation speed in such SLMs (below hundreds of Hz) presents limitations for many applications. Here we propose an SLM architecture that can achieve high pixel count with high-resolution phase-only modulation at high speed in excess of GHz. The architecture consists of a tunable two-dimensional array of vertically oriented, one-sided microcavities that are tuned through an electro-optic material such as barium titanate (BTO). We calculate that the optimized microcavity design achieves a {pi} phase shift under an applied bias voltage below 10 V, while maintaining nearly constant reflection amplitude. As two model applications, we consider high-speed 2D beam steering as well as beam forming. The outlined design methodology could also benefit future design of spatial light modulators with other specifications (for example amplitude modulators). This high-speed SLM architecture promises a wide range of new applications ranging from fully tunable metasurfaces to optical computing accelerators, high-speed interconnects, true 2D phased array beam steering, and quantum computing with cold atom arrays.
قيم البحث
اقرأ أيضاً
Complex optical systems such as high-quality microcavities enabled by advanced lithography and processing techniques paved the way to various light-matter interactions (LMI) studies. Without lattice-matching constraints in epitaxy, coating techniques
or shaky open cavity constructions, sub-micrometer-precise lithographic development of a polymer photoresist paves the way to polymer microcavity structures for various spectral regions based on the materials transparency and the geometrical sizes. We introduce a new approach based on 3D nanowriting in photoresist, which can be employed to achieve microscopic photonic Fabry-Perot cavity structures with mechanically-tunable resonator modes and polymer/air Bragg mirrors, directly on a chip or device substrate. We demonstrate by transfer-matrix calculations and computer-assisted modelling that open microcavities with up to two air-Bragg reflectors comprising alternating polymer/air mirror-pair layers enable compression-induced mode tuning that can benefit many LMI experiments, such as with 2D materials, nanoparticles and molecules.
Light modulation is an essential operation in photonics and optoelectronics. With existing and emerging technologies increasingly demanding compact, efficient, fast and broadband optical modulators, high-performance light modulation solutions are bec
oming indispensable. The recent realization that two-dimensional layered materials could modulate light with superior performance has prompted intense research and significant advances, paving the way for realistic applications. In this review, we cover the state-of-the-art of optical modulators based on two-dimensional layered materials including graphene, transition metal dichalcogenides and black phosphorus. We discuss recent advances employing hybrid structures, such as two-dimensional heterostructures, plasmonic structures, and silicon/fibre integrated structures. We also take a look at future perspectives and discuss the potential of yet relatively unexplored mechanisms such as magneto-optic and acousto-optic modulation.
Optical implementation of artificial neural networks has been attracting great attention due to its potential in parallel computation at speed of light. Although all-optical deep neural networks (AODNNs) with a few neurons have been experimentally de
monstrated with acceptable errors recently, the feasibility of large scale AODNNs remains unknown because error might accumulate inevitably with increasing number of neurons and connections. Here, we demonstrate a scalable AODNN with programmable linear operations and tunable nonlinear activation functions. We verify its scalability by measuring and analyzing errors propagating from a single neuron to the entire network. The feasibility of AODNNs is further confirmed by recognizing handwritten digits and fashions respectively.
Since the invention of the laser, adoption of new gain media and device architectures has provided solutions to a variety of applications requiring specific power, size, spectral, spatial, and temporal tunability. Here we introduce a fundamentally ne
w type of tunable semiconductor laser based on a phase-change perovskite metasurface that acts simultaneously as gain medium and optical cavity. As a proof of principle demonstration, we fabricate a subwavelength-thin perovskite metasurface supporting bound states in the continuum (BICs). Upon the perovskite structural phase transitions, both its refractive index and gain vary substantially, inducing fast (1.35 nm/K rate) and broad spectral tunability (>15 nm in the near-infrared), deterministic spatial mode hopping between polarization vortexes, and hysteretic optical bistability of the microlaser. These features highlight the uniqueness of phase-change perovskite tunable lasers, which may find wide applications in compact and low-cost optical multiplexers, sensors, memories, and LIDARs.
Dynamic axial focusing functionality has recently experienced widespread incorporation in microscopy, augmented/virtual reality (AR/VR), adaptive optics, and material processing. However, the limitations of existing varifocal tools continue to beset
the performance capabilities and operating overhead of the optical systems that mobilize such functionality. The varifocal tools that are the least burdensome to drive (ex: liquid crystal, elastomeric or optofluidic lenses) suffer from low (~ 100 Hz) refresh rates. Conversely, the fastest devices sacrifice either critical capabilities such as their dwelling capacity (ex: acoustic gradient lenses or monolithic micromechanical mirrors) or low operating overhead (e.g., deformable mirrors). Here, we present a general-purpose random-access axial focusing device that bridges these previously conflicting features of high speed, dwelling capacity and lightweight drive by employing low-rigidity micromirrors that exploit the robustness of defocusing phase profiles. Geometrically, the device consists of an 8.2 mm diameter array of piston-motion and 48 um-pitch micromirror pixels that provide 2pi phase shifting for wavelengths shorter than 1 100 nm with 10-90 % settling in 64.8 us (i.e., 15.44 kHz refresh rate). The pixels are electrically partitioned into 32 rings for a driving scheme that enables phase-wrapped operation with circular symmetry and requires less than 30 V per channel. Optical experiments demonstrated the arrays wide focusing range with a measured ability to target 29 distinct, resolvable depth planes. Overall, the features of the proposed array offer the potential for compact, straightforward methods of tackling bottlenecked applications including high-throughput single-cell targeting in neurobiology and the delivery of dense 3D visual information in AR/VR.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
