اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدVortex pinning and flux flow microwave studies of coated conductors
115
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Demanding microwave applications in a magnetic field require the material optimization not only in zero-field but, more important, in the in-field flux motion dominated regime. However, the effect of artificial pinning centers (APC) remains unclear at high frequency. Moreover, in coated conductors the evaluation of the high frequency material properties is difficult due to the complicated electromagnetic problem of a thin superconducting film on a buffered metal substrate. In this paper we present an experimental study at 48 GHz of 150-200 nm YBa$_2$Cu$_3$O$_{7-x}$ coated conductors, with and without APCs, on buffered Ni-5at%W tapes. By properly addressing the electromagnetic problem of the extraction of the superconductor parameters from the measured overall surface impedance $Z$, we are able to extract and to comment on the London penetration depth, the flux flow resistivity and the pinning constant, highlighting the effect of artificial pinning centers in these samples.
قيم البحث
اقرأ أيضاً
We present a comparative study of the angular dependent critical current density in YBa2Cu3O7 films deposited on IBAD MgO and on single crystal MgO and SrTiO3 substrates. We identify three angular regimes where pinning is dominated by different types
of correlated and uncorrelated defects. We show that those regimes are present in all cases, indicating that the pinning mechanisms are the same, but their extension and characteristics are sample dependent, reflecting the quantitative differences in texture and defect density. In particular, the more defective nature of the films on IBAD turns into an advantage as it results in stronger vortex pinning, demonstrating that the critical current density of the films on single crystals is not an upper limit for the performance of the IBAD coated conductors.
The ability of high-temperature superconductors (HTSs) to carry very large currents with almost no dissipation makes them irreplaceable for high-power applications. The development and further improvement of HTS-based cables requires an in-depth unde
rstanding of the superconducting vortex dynamics in presence of complex pinning landscapes. We present a critical current analysis of a real HTS sample in a magnetic field by combining state-of-the-art large-scale Ginzburg-Landau simulations with reconstructive three-dimensional scanning transmission electron microscopy tomography of the pinning landscape in Dy-doped YBa$_2$Cu$_3$O$_{7-delta}$. This methodology provides a unique look at the vortex dynamics in the presence of a complex pinning landscape, responsible for the high current-carrying capacity characteristic of commercial HTS wires. Our method demonstrates very good functional and quantitative agreement of the critical current between simulation and experiment, providing a new predictive tool for HTS wires design.
The flux pinning mechanism of NdO0.82F0.18FeAs superconductor made under high pressure, with a critical temperature, Tc, of 51 K, has been investigated in detail in this work. The field dependence of the magnetization and the temperature dependence o
f the magnetoresistivity were measured in fields up to 13 T. The field dependence of the critical current density, Jc(B), was analyzed within the collective pinning model. A crossover field, Bsb, from the single vortex to the small vortex bundle pinning regime was observed. The temperature dependence of Bsb(T) is in good agreement with the delta-l pinning mechanism, i.e., pinning associated with fluctuations in the charge-carrier mean free path, l. Analysis of resistive transition broadening revealed that thermally activated flux flow is found to be responsible for the resistivity contribution in the vicinity of Tc. The activation energy U0/kB is 2000 K in low fields and scales as B (-1/3) over a wide field range. Our results indicate that the NdO0.82F0.18FeAs has stronger intrinsic pinning than Bi-2212 and also stronger than MgB2 for H > 8 T.
We report on dynamics of non-local Abrikosov vortex flow in mesoscopic superconducting Nb channels. Magnetic field dependence of the non-local voltage induced by the flux flow shows that vortices form ordered vortex chains. Voltage asymmetry (rectifi
cation) with respect to the direction of vortex flow is evidence that vortex jamming strongly moderates vortex dynamics in mesoscopic geometries. The findings can be applied to superconducting devices exploiting vortex dynamics and vortex manipulation, including superconducting wires with engineered pinning centers.
The flux pinning force density (Fp) of the single crystalline FeTe0.60Se0.40 superconductor has been calculated from the magnetization measurements. The normalized Fp versus h (=H/Hirr) curves are scaled using the Dew-Hughes formula to underline the
pinning mechanism in the compound. The obtained values of pinning parameters p and q indicate the vortex pinning by the mixing of the surface and the point core pinning of the normal centers. The vortex phase diagram has also been drawn for the first time for the FeTe0.60Se0.40, which has very high values of critical current density Jc ~ 1.10(5) Amp/cm2 and the upper critical field Hc2(0) = 65T, with a reasonably high transition temperature Tc =14.5K.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
