ترغب بنشر مسار تعليمي؟ اضغط هنا

Low-threshold Stimulated Emission of Hybrid Perovskites at Room Temperature through Defect-Mediated Bound Excitons

98   0   0.0 ( 0 )
 نشر من قبل Qingbo Meng
 تاريخ النشر 2019
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Excitonic stimulated emission provides a promising mechanism and route to achieve low-threshold semiconductor lasers for micro-nano optoelectronic integrations. However, excitonic stimulated emission from quantum structure-free semiconductors has rarely been realised at room temperature due to the phase transition between excitonic and electron-hole plasma states. Herein, we show that through trap-state and band-edge engineering, bound exciton states can be stabilised within the hybrid lead bromide perovskite. Under modest pumping conditions, these states enable stimulated emission behaviour that exhibits a low threshold carrier density of only 1.6*1017 cm-3, as well as a high peak gain coefficient of ~1300 cm-1. This is the first time that bound exciton stimulated emission has been realised at room temperature from a quantum structure-free semiconductor. Not only does this open up new research horizons for perovskite materials, but also it has important implications for semiconductor excitonic physics and the development of next-generation optoelectronic applications.



قيم البحث

اقرأ أيضاً

Perovskites have been the focus of attention due to their multitude of outstanding optoelectronic properties and structural versatility. Two-dimensional halide perovskite such as (C_6H_5C_2H_4NH_3)_2PbI_4, or simply PEPI, forms natural multiple quant um wells with enhanced light-matter interactions, making them attractive systems for further investigation. This work reports tunable splitting of exciton modes in PEPI resulting from strong light-matter interactions, manifested as multiple dips (modes) in the reflection spectra. While the origin of the redder mode is well understood, that for the bluer dip at room temperature is still lacking. Here, it is revealed that the presence of the multiple modes originates from an indirect coupling between excitons in different quantum wells. The long-range characteristic of the mediated coupling between excitons in distant quantum wells is also demonstrated in a structure design along with its tunability. Moreover, a device architecture involving an end silver layer enhances the two excitonic modes and provides further tunability. Importantly, this work will motivate the possibility of coupling of the excitonic modes with a confined light mode in a microcavity to produce multiple exciton-polariton modes.
Polaritonic devices exploit the coherent coupling between excitonic and photonic degrees of freedom to perform highly nonlinear operations with low input powers. Most of the current results exploit excitons in epitaxially grown quantum wells and requ ire low temperature operation, while viable alternatives have yet to be found at room temperature. Here we show that large single-crystal flakes of two-dimensional layered perovskite are able to sustain strong polariton nonlinearities at room temperature with no need to be embedded in an optical cavity. In particular, exciton-exciton interaction energies are measured to be remarkably similar to the ones known for inorganic quantum wells at cryogenic temperatures, and more than one order of magnitude larger than alternative room temperature polariton devices reported so far. Thanks to their easy fabrication, large dipolar oscillator strengths and strong nonlinearities, these materials hold great promises to realize actual polariton devices at room temperature.
Bound states in the continuum (BICs) have attracted much attention in recent years due to the infinite quality factor (Q-factor) resonance and extremely localized field. In this study, BICs have been demonstrated by dielectric metasurfaces with hybri d surface lattice resonance (SLR) in the experiment. By breaking the symmetry of geometry, SLR can be easily switched between BICs and quasi-BICs. Comparing with literature, switching between BICs and quasi-BICs is usually accompanied by wavelength shift. Here, a design rule is proposed to prevent the wavelength shift when the Q-factor is changing. Also, such a design also makes subsequent identification of the laser threshold more credible. Due to the high Q-factor, low threshold laser is one of the intuitive applications of BICs. Utilize the high localized ability of BICs, low threshold BICs laser can be achieved by the dielectric metasurface immersed with Rhodamine 6G. Interestingly, due to the high Q-factor resonance of BICs, the laser signals and images can be observed in almost transparent samples. Not only the BICs laser is demonstrated in the experiment, but also the mechanism of BICs is deeply analyzed. This study can help readers better understand this novel feature of BICs, and provide the way for engineer BICs metasurfaces. The device can provide various applications, including laser, optical sensing, non-linear optics enhancement, and single-photon source.
Hybrid plasmonic lasers provide deep subwavelength optical confinement, strongly enhanced light-matter interaction and together with nanoscale footprint promise new applications in optical communication, bio-sensing and photolithography. The subwavel ength hybrid plasmonic lasers reported so far often use bottom up grown nanowires, nanorods and nanosquares, making it difficult to integrate these devices into industry-relevant high density plasmonic circuits. Here, we report the first experimental demonstration of AlGaInP based, red-emitting hybrid plasmonic lasers at room temperature using lithography based fabrication processes. Resonant cavities with deep subwavelength 2D and 3D mode confinement of lambda square/56 and lambda cube/199, respectively are demonstrated. A range of cavity geometries (waveguides, rings, squares and disks) show very low lasing thresholds of 0.6-1.8 mJ/cm square with wide gain bandwidth (610 nm-685 nm), which are attributed to the heterogeneous geometry of the gain material, the optimized etching technique, and the strong overlap of the gain material with the plasmonic modes. Most importantly, we establish the connection between mode confinements and enhanced absorption and stimulated emission, which play a critical role in maintaining low lasing thresholds at extremely small hybrid plasmonic cavities. Our results pave the way for the further integration of dense arrays of hybrid plasmonic lasers with optical and electronic technology platforms.
Recently, vacancy-related spin defects in silicon carbide (SiC) have been demonstrated to be potentially suitable for versatile quantum interface building and scalable quantum network construction. Significant efforts have been undertaken to identify spin systems in SiC and to extend their quantum capabilities using large-scale growth and advanced nanofabrication methods. Here we demonstrated a type of spin defect in the 4H polytype of SiC generated via hydrogen ion implantation with high-temperature post-annealing, which is different from any known defects. These spin defects can be optically addressed and coherently controlled even at room temperature, and their fluorescence spectrum and optically detected magnetic resonance spectra are different from those of any previously discovered defects. Moreover, the generation of these defects can be well controlled by optimizing the annealing temperature after implantation. These defects demonstrate high thermal stability with coherently controlled electron spins, facilitating their application in quantum sensing and masers under harsh conditions.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا