اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدTerahertz-based attosecond metrology of relativistic electron beams
79
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Photons, electrons, and their interplay are at the heart of photonic devices and modern instruments for ultrafast science [1-10]. Nowadays, electron beams of the highest intensity and brightness are created by photoemission with short laser pulses, and then accelerated and manipulated using GHz radiofrequency electromagnetic fields. The electron beams are utilized to directly map photoinduced dynamics with ultrafast electron scattering techniques, or further engaged for coherent radiation production at up to hard X-ray wavelengths [11-13]. The push towards improved timing precision between the electron beams and pump optical pulses though, has been stalled at the few tens of femtosecond level, due to technical challenges with synchronizing the high power rf fields with optical sources. Here, we demonstrate attosecond electron metrology using laser-generated single-cycle THz radiation, which is intrinsically phase locked to the optical drive pulses, to manipulate multi-MeV relativistic electron beams. Control and single-shot characterization of bright electron beams at this unprecedented level open up many new opportunities for atomic visualization.
قيم البحث
اقرأ أيضاً
Streaking of photoelectrons with optical lasers has been widely used for temporal characterization of attosecond extreme ultraviolet pulses. Recently, this technique has been adapted to characterize femtosecond x-ray pulses in free-electron lasers wi
th the streaking imprinted by farinfrared and Terahertz (THz) pulses. Here, we report successful implementation of THz streaking for time-stamping of an ultrashort relativistic electron beam of which the energy is several orders of magnitude higher than photoelectrons. Such ability is especially important for MeV ultrafast electron diffraction (UED) applications where electron beams with a few femtosecond pulse width may be obtained with longitudinal compression while the arrival time may fluctuate at a much larger time scale. Using this laser-driven THz streaking technique, the arrival time of an ultrashort electron beam with 6 fs (rms) pulse width has been determined with 1.5 fs (rms) accuracy. Furthermore, we have proposed and demonstrated a non-invasive method for correction of the timing jitter with femtosecond accuracy through measurement of the compressed beam energy, which may allow one to advance UED towards sub-10 fs frontier far beyond the ~100 fs (rms) jitter.
Terahertz (THz)-driven acceleration has recently emerged as a new route for delivering ultrashort bright electron beams efficiently, reliably, and in a compact setup. Many THz-driven acceleration related working schemes and key technologies have been
successfully demonstrated and are continuously being improved to new limits. However, the achieved acceleration gradient and energy gain remain low, and the potential physics and technical challenges in the high field and high energy regime are still under-explored. Here we report a record energy gain of 170 keV in a single-stage configuration, and demonstrate the first cascaded acceleration of a relativistic beam with a 204 keV energy gain in a two-stages setup. Whole-bunch acceleration is accomplished with an average accelerating gradient of 85 MV/m and a peak THz electric field of 1.1 GV/m. This proof-of-principle result is a crucial advance in THz-driven acceleration with a major impact on future electron sources and related scientific discoveries.
Dielectric structures driven by laser-generated terahertz (THz) pulses may hold the key to overcoming the technological limitations of conventional particle accelerators and with recent experimental demonstrations of acceleration, compression and str
eaking of low-energy (sub-100 keV) electron beams, operation at relativistic beam energies is now essential to realize the full potential of THz-driven structures. We present the first THz-driven linear acceleration of relativistic 35 MeV electron bunches, exploiting the collinear excitation of a dielectric-lined waveguide driven by the longitudinal electric field component of polarization-tailored, narrowband THz pulses. Our results pave the way to unprecedented control over relativistic electron beams, providing bunch compression for ultrafast electron diffraction, energy manipulation for bunch diagnostics, and ultimately delivering high-field gradients for compact THz-driven particle acceleration.
We propose and demonstrate a Terahertz (THz) oscilloscope for recording time information of an ultrashort electron beam. By injecting a laser-driven THz pulse with circular polarization into a dielectric tube, the electron beam is swept helically suc
h that the time information is uniformly encoded into the angular distribution that allows one to characterize both the temporal profile and timing jitter of an electron beam. The dynamic range of the measurement in such a configuration is significantly increased compared to deflection with a linearly polarized THz pulse. With this THz oscilloscope, nearly 50-fold longitudinal compression of a relativistic electron beam to about 15 fs (rms) is directly visualized with its arrival time determined with 3 fs accuracy. This technique bridges the gap between streaking of photoelectrons with optical lasers and deflection of relativistic electron beams with radio-frequency deflectors, and should have wide applications in many ultrashort electron beam based facilities.
High power, relativistic electron beams from energy recovery linacs have great potential to realize new experimental paradigms for pioneering innovation in fundamental and applied research. A major design consideration for this new generation of expe
rimental capabilities is the understanding of the halo associated with these bright, intense beams. In this Letter, we report on measurements performed using the 100 MeV, 430 kWatt CW electron beam from the energy recovery linac at the Jefferson Laboratorys Free Electron Laser facility as it traversed a set of small apertures in a 127 mm long aluminum block. Thermal measurements of the block together with neutron measurements near the beam-target interaction point yielded a consistent understanding of the beam losses. These were determined to be 3 ppm through a 2 mm diameter aperture and were maintained during a 7 hour continuous run.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
