اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدTesting baryon-induced core formation in $Lambda$CDM: A comparison of the DC14 and coreNFW dark matter halo models on galaxy rotation curves
125
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Recent cosmological hydrodynamical simulations suggest that baryonic processes, and in particular supernova feedback after bursts of star formation, can alter the structure of dark matter haloes and transform primordial cusps into shallower cores. To assess whether this mechanism offers a solution to the cusp-core controversy, simulated haloes must be compared to real dark matter haloes inferred from galaxy rotation curves. For this purpose, two new dark matter density profiles were recently derived from simulations of galaxies in complementary mass ranges: the DC14 halo ($10^{10} < M_{text{halo}}/M_{odot} < 8 times 10^{11}$) and the coreNFW halo ($10^{7} < M_{text{halo}}/M_{odot} < 10^{9}$). Both models have individually been found to give good fits to observed rotation curves. For the DC14 model, however, the agreement of the predicted halo properties with cosmological scaling relations was confirmed by one study, but strongly refuted by another. A next question is whether the two models converge to the same solution in the mass range where both should be appropriate. To investigate this, we tested the DC14 and cNFW halo models on the rotation curves of a selection of galaxies with halo masses in the range $4 times 10^{9}$ - $7 times 10^{10}$ $M_{odot}$. We further applied the DC14 model to a set of rotation curves at higher halo masses, up to $9 times 10^{11}$ $M_{odot}$, to verify the agreement with the cosmological scaling relations. We find that both models are generally able to reproduce the observed rotation curves, in line with earlier results, and the predicted dark matter haloes are consistent with the cosmological $c-M_{text{halo}}$ and $M_{*}-M_{text{halo}}$ relations. The DC14 and cNFW models are also in fairly good agreement with each other, even though DC14 tends to predict slightly less extended cores and somewhat more concentrated haloes than cNFW.
قيم البحث
اقرأ أيضاً
Dark matter-baryon scaling relations in galaxies are important in order to constrain galaxy formation models. Here, we provide a modern quantitative assessment of those relations, by modelling the rotation curves of galaxies from the Spitzer Photomet
ry and Accurate Rotation Curves (SPARC) database with the Einasto dark halo model. We focus in particular on the comparison between the original SPARC parameters, with constant mass-to-light ratios for bulges and disks, and the parameters for which galaxies follow the tightest radial acceleration relation. We show that fits are improved in the second case, and that the pure halo scaling relations also become tighter. We report that the density at the radius where the slope is -2 is strongly anticorrelated to this radius, and to the Einasto index. The latter is close to unity for a large number of galaxies, indicative of large cores. In terms of dark matter-baryon scalings, we focus on relations between the core properties and the extent of the baryonic component, which are relevant to the cusp-core transformation process. We report a positive correlation between the core size of halos with small Einasto index and the stellar disk scale-length, as well as between the averaged dark matter density within 2 kpc and the baryon-induced rotational velocity at that radius. This finding is related to the consequence of the radial acceleration relation on the diversity of rotation curve shapes, quantified by the rotational velocity at 2 kpc. While a tight radial acceleration relation slightly decreases the observed diversity compared to the original SPARC parameters, the diversity of baryon-induced accelerations at 2 kpc is sufficient to induce a large diversity, incompatible with current hydrodynamical simulations of galaxy formation, while maintaining a tight radial acceleration relation.
We analyze the cold dark matter density profiles of 54 galaxy halos simulated with FIRE-2 galaxy formation physics, each resolved within $0.5%$ of the halo virial radius. These halos contain galaxies with masses that range from ultra-faint dwarfs ($M
_star simeq 10^{4.5} M_{odot}$) to the largest spirals ($M_star simeq 10^{11} M_{odot}$) and have density profiles that are both cored and cuspy. We characterize our results using a new analytic density profile that extends the standard Einasto form to allow for a pronounced constant-density core in the resolved innermost radius. With one additional core-radius parameter, $r_{c}$, this core-Einasto profile is able to characterize the shape and normalization of our feedback-impacted dark matter halos. In order to enable comparisons with observations, we provide fitting functions for $r_{c}$ and other profile parameters as a function of both $M_star$ and $M_{star}/M_{rm halo}$. In agreement with similar studies done in the literature, we find that dark matter core formation is most efficient at the characteristic stellar-mass to halo-mass ratio $M_star/M_{rm halo} simeq 5 times 10^{-3}$, or $M_{star} sim 10^9 , M_{odot}$, with cores that are roughly the size of the galaxy half-light radius, $r_{c} simeq 1-5$ kpc. Furthermore, we find no evidence for core formation at radii $gtrsim 100 rm pc$ in galaxies with $M_{star}/M_{rm halo} < 5times 10^{-4}$ or $M_star lesssim 10^6 , M_{odot}$. For Milky Way-size galaxies, baryonic contraction often makes halos significantly more concentrated and dense at the stellar half-light radius than dark matter only runs. However, even at the Milky Way scale, FIRE-2 galaxy formation still produces small dark matter cores of $simeq 0.5-2$ kpc in size. Recent evidence for a ${sim} 2$ kpc core in the Milky Ways dark matter halo is consistent with this expectation.
We examine the effect of using different halo finders and merger tree building algorithms on galaxy properties predicted using the GALFORM semi-analytical model run on a high resolution, large volume dark matter simulation. The halo finders/tree buil
ders HBT, ROCKSTAR, SUBFIND and VELOCIRAPTOR differ in their definitions of halo mass, on whether only spatial or phase-space information is used, and in how they distinguish satellite and main haloes; all of these features have some impact on the model galaxies, even after the trees are post-processed and homogenised by GALFORM. The stellar mass function is insensitive to the halo and merger tree finder adopted. However, we find that the number of central and satellite galaxies in GALFORM does depend slightly on the halo finder/tree builder. The number of galaxies without resolved subhaloes depends strongly on the tree builder, with VELOCIRAPTOR, a phase-space finder, showing the largest population of such galaxies. The distributions of stellar masses, cold and hot gas masses, and star formation rates agree well between different halo finders/tree builders. However, because VELOCIRAPTOR has more early progenitor haloes, with these trees GALFORM produces slightly higher star formation rate densities at high redshift, smaller galaxy sizes, and larger stellar masses for the spheroid component. Since in all cases these differences are small we conclude that, when all of the trees are processed so that the main progenitor mass increases monotonically, the predicted GALFORM galaxy populations are stable and consistent for these four halo finders/tree builders.
The leading tensions to the collisionless cold dark matter (CDM) paradigm are the small-scale controversies, discrepancies between observations at the dwarf-galactic scale and their simulational counterparts. In this work we consider methods to infer
3D morphological information on Local Group dwarf spheroidals, and test the fitness of CDM+hydrodynamics simulations to the observed galaxy shapes. We find that the subpopulation of dwarf galaxies with mass-to-light ratio $gtrsim 100 M_odot/L_odot$ reflects an oblate morphology. This is discrepant with the dwarf galaxies with mass-to-light ratio $lesssim 100 M_odot/L_odot$, which reflect prolate morphologies, and more importantly with simulations of CDM-sourced galaxies which are explicitly prolate. Although more simulations and data are called for, if evidence of oblate pressure-supported stellar distributions persists, we argue that an underlying oblate non-CDM dark matter halo may be required, and present this as motivation for future studies.
We perform a set of non-radiative hydro-dynamical (NHD) simulations of a rich cluster sized dark matter halo from the Phoenix project with 3 different numerical resolutions, to investigate the effect of hydrodynamics alone on the subhalo population i
n the halo. Compared to dark matter only (DMO) simulations of the same halo, subhaloes are less abundant for relatively massive subhaloes ($M_{sub} > 2.5 times 10^9h^{-1}M_{odot}$, or $V_{max} > 70 kms^{-1}$) but more abundant for less massive subhaloes in the NHD simulations. This results in different shapes in the subhalo mass/$V_{max}$ function in two different sets of simulations. At given subhalo mass, the subhaloes less massive than $10^{10} h^{-1}M_{odot}$ have larger $V_{max}$ in the NHD than DMO simulations, while $V_{max}$ is similar for the subhaloes more massive than the mass value. This is mainly because the progenitors of present day low mass subhaloes have larger concentration parameters in the NHD than DMO simulations. The survival number fraction of the accreted low mass progenitors of the main halo at redshift 2 is about 50 percent higher in the NHD than DMO simulations.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
