اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدUltrasensitive, high-dynamic-range and broadband strain sensing by time-of-flight detection with femtosecond-laser frequency combs
357
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Ultrahigh-resolution optical strain sensors provide powerful tools in various scientific and engineering fields, ranging from long-baseline interferometers to civil and aerospace industries. Here we demonstrate an ultrahigh-resolution fibre strain sensing method by directly detecting the time-of-flight (TOF) change of the optical pulse train generated from a free-running passively mode-locked laser (MLL) frequency comb. We achieved a local strain resolution of 18 p{epsilon}/Hz1/2 and 1.9 p{epsilon}/Hz1/2 at 1 Hz and 3 kHz, respectively, with largedynamic range of >154 dB at 3 kHz. For remote-point sensing at 1-km distance, 80 p{epsilon}/Hz1/2 (at 1 Hz) and 2.2 p{epsilon}/Hz1/2 (at 3 kHz) resolution is demonstrated. While attaining both ultrahigh resolution and large dynamic range, the demonstrated method can be readily extended for multiple-point sensing as well by taking advantage of the broad optical comb spectra. These advantages may allow various applications of this sensor in geophysical science, structural health monitoring, and underwater science.
قيم البحث
اقرأ أيضاً
Femtosecond-scale ultrafast imaging is an essential tool for visualizing ultrafast dynamics in molecular biology, physical chemistry, atomic physics, and fluid dynamics. Pump-probe imaging and a streak camera are the most widely used techniques, but
they are either demanding the repetitions of the same scene or sacrificing the number of imaging dimensions. Many interesting single-shot ultrafast imaging techniques have been developed in recent years for recording non-repetitive dynamic scenes. Nevertheless, there are still weaknesses in the number of frames, the number of image pixels, or spatial/temporal resolution. Here, we present a single-shot ultrafast microscopy that can capture more than a dozen frames at a time with the frame rate of 5 THz. We combine a spatial light modulator and a custom-made echelon for efficiently generating a large number of reference pulses with designed time delays and propagation angles. The single-shot recording of the interference image between these reference pulses with a sample pulse allows us to retrieve the stroboscopic images of the dynamic scene at the timing of the reference pulses. We demonstrated the recording of 14 temporal snapshots at a time, which is the largest to date, with the optimal temporal resolution set by the laser output pulse. Our ultrafast microscopy is highly scalable in the number of frames and temporal resolutions, and this will have profound impacts on uncovering the interesting spatio-temporal dynamics yet to be explored.
Ultra-low frequency noise lasers have been widely used in laser-based experiments. Most narrow-linewidth lasers are implemented by actively suppressing their frequency noise through a frequency noise servo loop (FNSL). The loop bandwidths (LBW) of FN
SLs are currently below megahertz, which is gradually tricky to meet application requirements, especially for wideband quantum sensing experiments. This article has experimentally implemented an FNSL with loop-delay-limited 3.5 MHz LBW, which is an order higher than the usual FNSLs. Using this FNSL, we achieved 70 dB laser frequency noise suppression over 100 kHz Fourier frequency range. This technology has broad applications in vast fields where wideband laser frequency noise suppression is inevitable.
We present homogeneous quantum cascade lasers (QCLs) emitting around 3 THz which display bandwidths up to 950 GHz with a single stable beatnote. Devices are spontaneously operating in a harmonic comb state, and when in a dense mode regime they can be
injection locked at the cavity roundtrip frequency with very small RF powers down to -55 dBm. When operated in the electrically unstable region of negative differential resistance, the device displays ultra-broadband operation exceeding 1.83 THz ($Delta f/f=50%$) with high phase noise, exhibiting self-sustained, periodic voltage oscillations. The low CW threshold (115 A$cdot$ cm$^{-2}$) and broadband comb operation ($Delta f/f=25%$) make these sources extremely appealing for on-chip frequency comb applications.
Semiconductor ring lasers are miniaturized devices that operate on clockwise and counterclockwise modes. These modes are not coupled in the absence of intracavity reflectors, which prevents the formation of a standing wave in the cavity and, conseque
ntly, of a population inversion grating. This should inhibit the onset of multimode emission driven by spatial hole burning. Here we show that, despite this notion, ring quantum cascade lasers inherently operate in phase-locked multimode states, that switch on and off as the pumping level is progressively increased. By rewriting the master equation of lasers with fast gain media in the form of the complex Ginzburg-Landau equation, we show that ring frequency combs stem from a phase instability---a phenomenon also known in superconductors and Bose-Einstein condensates. The instability is due to coupling of the amplitude and phase modulation of the optical field in a semiconductor laser, which plays the role of a Kerr nonlinearity, highlighting a connection between laser and microresonator frequency combs.
Electro-optic frequency combs were employed to rapidly interrogate an optomechanical sensor, demonstrating spectral resolution substantially exceeding that possible with a mode-locked frequency comb. Frequency combs were generated using an integrated
-circuit-based direct digital synthesizer and utilized in a self-heterodyne configuration. Unlike approaches based upon laser locking or sweeping, the present approach allows rapid, parallel measurements of full optical cavity modes, large dynamic range of sensor displacement, and acquisition across a wide frequency range between DC and 500 kHz. In addition to being well suited to measurements of cavity optomechanical sensors, this optical frequency comb-based approach can be utilized for interrogation in a wide range of physical and chemical sensors.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
