اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدResistive switching in MoSe$_{2}$/BaTiO$_{3}$ hybrid structures
193
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Here we study the resistive switching (RS) effect that emerges when ferroelectric BaTiO$_{3}$ (BTO) and few-layers MoSe$_{2}$ are combined in one single structure. The C-V loops reveal the ferroelectric nature of both Al/Si/SiO$_{x}$/BTO/Au and Al/Si/SiO$_{x}$/MoSe$_{2}$/BTO/Au structures and the high quality of the SiO$_{x}$/MoSe$_{2}$ interface in the Al/Si/SiOx/MoSe$_{2}$/Au structure. Al/Si/SiO$_{x}$/MoSe$_{2}$/BTO/Au hybrid structures show the electroforming free resistive switching that is explained on the basis of the modulation of the potential distribution at the MoSe$_{2}$/BTO interface via ferroelectric polarization flipping. This structure shows promising resistive switching characteristics with switching ratio of $approx{}$10$^{2}$ and a stable memory window, which are highly required for memory applications.
قيم البحث
اقرأ أيضاً
The increasing demand for high-density data storage leads to an increasing interest in novel memory concepts with high scalability and the opportunity of storing multiple bits in one cell. A promising candidate is the redox-based resistive switch rep
ositing the information in form of different resistance states. For reliable programming, the underlying physical parameters need to be understood. We reveal that the programmable resistance states are linked to internal series resistances and the fundamental nonlinear switching kinetics. The switching kinetics of Ta$_{2}$O$_{5}$-based cells was investigated in a wide range over 15 orders of magnitude from 250 ps to 10$^{5}$ s. We found strong evidence for a switching speed of 10 ps which is consistent with analog electronic circuit simulations. On all time scales, multi-bit data storage capabilities were demonstrated. The elucidated link between fundamental material properties and multi-bit data storage paves the way for designing resistive switches for memory and neuromorphic applications.
Non-volatile resistive switching is demonstrated in memristors with nanocrystalline molybdenum disulfide (MoS$_2$) as the active material. The vertical heterostructures consist of silicon, vertically aligned MoS$_2$ and chrome / gold metal electrodes
. Electrical characterizations reveal a bipolar and forming free switching process with stable retention for at least 2500 seconds. Controlled experiments carried out in ambient and vacuum conditions suggest that the observed resistive switching is based on hydroxyl ions (OH$^-$). These originate from catalytic splitting of adsorbed water molecules by MoS$_2$. Experimental results in combination with analytical simulations further suggest that electric field driven movement of the mobile OH$^-$ ions along the vertical MoS$_2$ layers influences the energy barrier at the Si/MoS$_2$ interface. The scalable and semiconductor production compatible device fabrication process used in this work offers the opportunity to integrate such memristors into existing silicon technology for future neuromorphic applications. The observed ion-based plasticity may be exploited in ionicelectronic devices based on TMDs and other 2D materials for memristive applications.
We investigate two-dimensional electric dipole sheets in the superlattice made of BaTiO$_{3}$ and BaZrO$_{3}$ using first-principles-based Monte-Carlo simulations and density functional calculations. Electric dipole domains and complex patterns are o
bserved and the complex dipole structures with various symmetries (e.g. Pma2, Cmcm and Pmc2_{1}) are further confirmed by density functional calculations, which are found to be almost degenerate in energy with the ferroelectric ground state of the Amm2 symmetry, therefore strongly resembling magnetic sheets. More complex dipole patterns, including vortices and anti-vortices, are also observed, which may constitute the intermediate states that overcome the high energy barrier of different polarization orientations previously predicted by Lebedevonlinecite{Lebedev2013}. We also show that such system possesses large electrostrictive effects that may be technologically important.
Excitons in atomically-thin semiconductors interact very strongly with electromagnetic radiation and are necessarily close to a surface. Here, we exploit the deep-subwavelength confinement of surface plasmon polaritons (SPPs) at the edge of a metal-i
nsulator-metal plasmonic waveguide and their proximity of 2D excitons in an adjacent atomically thin semiconductor to build an ultra-compact photodetector. When subject to far-field excitation we show that excitons are created throughout the dielectric gap region of our waveguide and converted to free carriers primarily at the anode of our device. In the near-field regime, strongly confined SPPs are launched, routed and detected in a 20nm narrow region at the interface between the waveguide and the monolayer semiconductor. This leads to an ultra-compact active detector region of only ~0.03$mu m ^2$ that absorbs 86% of the propagating energy in the SPP. Due to the electromagnetic character of the SPPs, the spectral response is essentially identical to the far-field regime, exhibiting strong resonances close to the exciton energies. While most of our experiments are performed on monolayer thick MoSe$_2$, the photocurrent-per-layer increases super linearly in multilayer devices due to the suppression of radiative exciton recombination. These results demonstrate an integrated device for nanoscale routing and detection of light with the potential for on-chip integration at technologically relevant, few-nanometer length scales.
We extend results by Stotland and Di Ventra on the phenomenon of resistive switching aided by noise. We further the analysis of the mechanism underlying the beneficial role of noise and study the EPIR (Electrical Pulse Induced Resistance) ratio depen
dence with noise power. In the case of internal noise we find an optimal range where the EPIR ratio is both maximized and independent of the preceding resistive state. However, when external noise is considered no beneficial effect is observed.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
